Mikroe 1718 jobs
...can always turn up to ManyVids. Here are a couple of statistics that help you understand how big ManyVids is, As of 2020, the estimated revenue of ManyVids was more than $3 million. ManyVids had more than 3 million users and 70,000 creators in 2019. This was before the pandemic. Now, the figures would have soared high. When we were drafting this article, the Alexa Global Ranking of ManyVids was 1718. The answer to how much can models make on ManyVids depends on the models themselves. OnlyFans, Patreon, ManyVids, The platform doesn’t matter – the efforts put in by the model is what really matters. The more consistent you are, the more you can earn on ManyVids or any other platform for that matter of fact. But to put out approximate figures, with the potential that ...
I have several Mikroe click boards. I am going to design a system which get biomedical data using ECG EEG sensors(which are Mikroe ECG/EEG/PPG boards). Based on boards I have, I need somone who write STM32 codes (using HAL)and help me to implement the project. Additionally, I am interested in having the embedded system provide sensor integration functionalities. As a result, knowledge in communicating with sensors, obtaining data, and storing in SD card. For this project, experience with embedded systems and C++ programming is a must.
I have firmware for 7 segments display written in C, for Arduino. It displays data from the serial RS-485 or the DAC 4-20mA interface, into the 4 digits. In addition to adapting the Arduino firmware to the PIC18F, two P10 displays will be used to replace the 4-digit, 7-segment display. P10 display libraries available on the internet (validated). The hardware: > Mickroe Clicker 2 for PIC18FK > RS485 Isolator 2 Click > 4-20mA R click > 2un P10 display
Identifying Non-Functional Requirements from Mobile Apps User’s Reviews. You should sign up first, then start classifying the user review of various mobile apps as Usability, Reliability, Portability, Performance, Learnability, Compatibility, Security, Functional Requirements, or Others you have to classify 1718 user reviews to complete this task.
Identifying Non-Functional Requirements from Mobile Apps User’s Reviews. You should sign up first, then start classifying the user review of various mobile apps as Usability, Reliability, Portability, Performance, Learnability, Compatibility, Security, Functional Requirements, or Others you have to classify 1718 user reviews to complete this task.
I need someone to help me read the Temperature and LAB data from AS73211 mikroe
This project is for REMOTE DEVELOPMENT, meaning everything is connected locally and the requirement is to develop on my board remotely on a dedicated machine. I would like to connect a to my Avnet Azure Sphere Dev kit v1. The board communicates in I2C and has digital i/o pins i want to turn on and off. In addition, i would like to use the onboard temp sensor to display temp in the device output. This is programmed in C.
We are looking to get the framework put in place on a Raspberry pi that includes reading data from a CANBus and then displaying this on a GUI. We have a Raspberry Pi Touchscreen and a MIKROE-68 (CAN to SPI) as the interfaces. The software needs to be modular so that we can add new CAN messages and GUI components as required. The Pi will also preferably be set up with a custom splash screen and show no Raspberry Pi artefacts on bootup. Deliverables -CANBus message read into Pi and convert data to GUI display/graph -Modular software design so messages and display can be easily added in future -Custom Pi splash screen with no Pi artefacts
We are looking to get the framework put in place on a Raspberry pi that includes reading data from a CANBus and then displaying this on a GUI. We have a Raspberry Pi Touchscreen and a MIKROE-68 (CAN to SPI) as the interfaces. The software needs to be modular so that we can add new CAN messages and GUI components as required. The Pi will also preferably be set up with a custom splash screen and show no Raspberry Pi artefacts on bootup. Deliverables CANBus message read into Pi and convert data to GUI display/graph Modular software design so messages and display can be easily added in future Custom Pi splash screen with no Pi artefacts
We are looking to get the framework put in place on a Raspberry pi that includes reading data from a CANBus and then displaying this on a GUI. We have a Raspberry Pi Touchscreen and a MIKROE-68 (CAN to SPI) as the interfaces. The software needs to be modular so that we can add new CAN messages and GUI components as required. The Pi will also preferably be set up with a custom splash screen and show no Raspberry Pi artefacts on bootup.
We are looking to get the framework put in place on a Raspberry pi that includes reading data from a CANBus and then displaying this on a GUI. We have a Raspberry Pi Touchscreen and a MIKROE-68 (CAN to SPI) as the interfaces. The software needs to be modular so that we can add new CAN messages and GUI components as required. The Pi will also preferably be set up with a custom splash screen and show no Raspberry Pi artefacts on bootup. Similar setup to the attached video.
- 10000-word eBook - Target audience: AI devs - Problem to solve: AI devs need to test their ML code for IoT devices, but have little or no experience with building and programming boards and creating quick proof of concept. - Subject: use Microchip MPLab environment in combination with MiKro Elektronik (rebranded MikroE)’s click boards to create a quick proof of concept by showcasing 3 simple functions. - Why not Arduino or RaspberryPi? MiKroE has been related to the professional engineering world for years, and their microcontrollers are used even in the aerospace industry, and in Industrial and Ethernet R&D environments. - Coding language: mainly C/C++ - Goal: lead generation
1718 words. Personal text for immigration process.
Hi Abdellah Islam K., I would like to engage your services on TouchGFX and displays. I would like to find a smart display or get a board that will fit a display using the STM 32 and the touchgfx. Can I engage your service first to identify the hardware and then later to code the programs on the both the graphics display and the STM32. I am looking for a replacemen...engage your services on TouchGFX and displays. I would like to find a smart display or get a board that will fit a display using the STM 32 and the touchgfx. Can I engage your service first to identify the hardware and then later to code the programs on the both the graphics display and the STM32. I am looking for a replacement board for the one I am currently using which is a display from Mikroe Please advise ...
is a wordpress site. After a review is posted to each service, the administrator approves the review and the review is displayed. Please make sure that the reviews are automatically posted on my Twitter a...approves the review and the review is displayed. Please make sure that the reviews are automatically posted on my Twitter and Facebook when the reviews are displayed on the site. And please use the free SNS auto-posting I need to get the API, I'll get it. I will attach the completed image and specifications. Operation image: After admin posted from 保育士求人転職.net/review/default/review/4/1718, review is displayed on I would like 2-3 days for delivery. I adopt a freelancer that can be created for $ 30.
... wsgi_app response = self.full_dispatch_request() File "/root/anaconda3/lib/python3.7/site-packages/flask/", line 1815, in full_dispatch_request rv = self.handle_user_exception(e) File "/root/anaconda3/lib/python3.7/site-packages/flask/", line 1718, in handle_user_exception reraise(exc_type, exc_value, tb) File "/root/anaconda3/lib/python3.7/site-packages/flask/", line 35, in reraise raise value File "/root/anaconda3/lib/...
Iot projects. We are looking for mcu firmware programmers that would program with mikroe- C.
I need some progress bars and buttons to work Please review the requirements before bidding
I'm Bhuvana, the Director of an Industrial Automation Solutions company in Chennai - Transforth Engineering Solutions Pvt. Ltd. For a project now, the PCBs are ready. We need someone to program our requirements. The project is to transmit data from sensors through PIC18F46K22 Microcontroller and MikroE 2542 WiFi ESP Click to a PC, over wifi. This is a very urgent requirement. So, we need someone who is very confident and is based in Chennai.
...just need to set the name of the device and PIN if possible. Baud rate will be 19200-N-8-1 Power Consumption This is a battery powered device so we need to save power and heat. Data packets are sent 1x per minute so if its better battery-wise to make connection, send packet, drop connection every time we should do that. Sample of a JSON data packet: { "version": 1.00,"generator": "DSII", "RAM": 1718, "serialNumber": "09-1021","stationID": "Probe in Hospital","token": "XXXXX","battery": "OK","status": "OK","timeStamp": "2019-01-22T15:53:44.000Z","data": [{ "code": 4,"unitCode": 4, "sens...
...faster workflow. Linked layers will enable a quick update across all 4 banners. The linked parts are the button, the headline, new, and the promo. 2) Double click on the linked layer. Once the linked file is open, make changes there and save. The change should then appear in all banners. 3) Change: Please update the branding to Target $1000 and update the image to Email 1) Open the Email PSD template. Replace the images in three places: the promo gift card, the texture/pattern behind the headline area, and the smaller image that is next to the gift card. 2) The chosen images should reflect the style/feel/mood of the brand that is being promoted on the gift card. However, please do not use the actual brand
Hello, I am seeking a professional to extract fom the folloiwng link: the whole details of all listed Swiss Biotech companies and to provide the data fully structured in an Excel spreadsheet.
I'm looking for a simple hip-hop , RnB music management theme looking for a simple to navigate theme, basic home screen with the title lets vibe and our motto the vibe the people the soul the music with a background , and i need 3 tabs - artist - what we do - contact us. some examples - - -
Hi I am looking for a programmer to program on the mikroe platform which is the FT900 from FTDI. I will provide all the tools, displays etc. However this might be a learning curve for you. I would hire you by the hour to do projects continuously and also the maintain the projects once done. Please advise if this is of interest to you. The FT900 is also to be used as a controller, graphical display, IOT, and eventually communicate with an app (to be built also).
I am a new book writer that is in need of a book a really great editor and copywriter to review my material for publishing. The name of my book is called "Leah And The No More Bully Down Days", It is 28 pages with 1718 words. The overview of my story is that Leah is being bullied and overcomes the school bully by reading a letter in front of the school addressing how it makes her feel. Which is an excerpt from her diary.
I am a new book writer that is in need of a book a really great editor and copywriter to review my material for publishing. The name of my book is called "Leah And The No More Bully Down Days", It is 28 pages with 1718 words. The overview of my story is that Leah is being bullied and overcomes the school bully by reading a letter in front of the school addressing how it makes her feel. Which is an excerpt from her diary.
This is a data entry job which involves changing the currency conversion of a spreadsheet in 2 columns for each order, for 1718 rows. You will be switching between USD and AUD currency. The rates for currency conversion need to be researched online (instructions included). You do not need an accounting background for this work, but attention to detail is critical. The milestone for this project will not be released until a standard of 100% accuracy is demonstrated. Time frame is flexible, but I need to set a maximum of 7 days to complete the work.
We need to translate a small program from python to Delphi, this program takes an microprocessor HEX file and send it by USB connection. What you need to do, is to translate this program to Delphi (Version XE7 or above) but instead of write to the USB port, generate an output txt file. We will provide some working examples. You can get the source from here
I am using Arduino DMD based on freetronics library and display (Check details here). I want you to build some thing similar for STM32 using MikroE or Keil library
I. ARCHITECTURE 1. Specification Must use Nordic NRF. The basis, it is like a combination of MP3 Player + Voice Input + Wireless (Bluetooth) POWER Battery->Hard Wire/SMT->USB Charging Circuit->Power IC->Vcc MCU ARM 8 bit at least/Mikroe ARM Compiler OR; AUDIO DSP TBD Note: I2S in most of the case INPUT/TRANSDUCER/SENSOR 3D Motion Sensor->UART/spi/i2c->MCU Microphone->Hard Wire->AUDIO DSP OUTPUT/ACTUATOR/WIRELESS AUDIO DSP->Hard Wire->Bone Conduction Speaker MCU->UART/spi/i2c->Bluetooth MISC Bicolor LED, Blue and Red Diagram -TBD- Diagram -Not Relevant- II. H/W UX or PROGRAM OUTLINE They are 3 main things:- 1. The Air Gesture Patttern to trigger a control to the smartphone 1.1 Preset:- -Swing Forward next s...
I am using Arduino DMD based on freetronics library and display (Check details here). I want you to build some thing similar for STM32 using MikroE or Keil library
Hi Armref, I noticed your profile and would like to offer you my project. We can discuss any details over chat. Whats app 1718 974 3824
Dear freelancer , what i want that some one will start with me online classes how I can start record via pic18 or pic24 over MIkroc , in wav format and how to manage to get minimum current consumption, what the trick we can use , and how we can change sample rate no need for pcb design , all work will be done over development kit such as easy pic 7 from mikroe also no need for microphone preamp , I will normal line from you PC for now
Dear freelancer , what i want that some one will start with me online classes how I can start record via pic18 or pic24 over MIkroc , in wav format and how to manage to get minimum current consumption, what the trick we can use , and how we can change sample rate no need for pcb design , all work will be done over development kit such as easy pic 7 from mikroe also no need for microphone preamp , I will normal line from you PC for now
simply using pic18 or 24 to record wav format on sd card . the system should be with lowest power consumption , I will start with normal line in voice , no need for microphone , only to know the concept , I have full development kit and wait for program . what is requirement form freelancer : - 1- no need to design PCB , development k...have full development kit and wait for program . what is requirement form freelancer : - 1- no need to design PCB , development kit in my side is enough 2- lowest power consumption with play with MCU clock 3- let me now the concept of recording speech the freelancer should be expert and know the latest technology and best tricks in electronic world I use mikroc compiler with mikroe dev board thanks in advance rega...
I need someone to design some corporate imagery that can be used as a background or a banner in powerpoint prese...%253Bhttp%25253A%25252F%%25252F2015%25252F01%25252Fsydney-harbour-bridge.html&source=iu&pf=m&fir=L7-L0vaklU_GhM%253A%252CKQdGNnqzEDMEsM%252C_&usg=__IJ84OBtn9mnBL-507fRSUwEUj8g%3D&biw=1366&bih=599&ved=0CDEQyjc&ei=zcFrVeLvEoL5mAWpsYOoBg#imgrc=nEhth4YoxOeyAM%253A%3BBKLX5ZlzsCD7FM%3Bhttp%253A%252F%%252Fattractions%%3Bhttp%253A%252F%%252Fattractions%%3B700%3B500 Agricultural image - Please let me know if you need any more detail?
A software written in MicroC (ATMEL microcontroller compatible with Philips P89V51RD2) to interface nrf24L01. Software must use acknowledge feature of NRF24L01 for reliable data transmission/reception. Only one byte will be transmitted/receive...transmitted by any slave so data can be differentiated from "n"). Work Flow (Slave): 1. Slave polls for "IRQ" and if "P" is received then transmits a byte. 2. Slave waits for an acknowledgement and function returns 0x01 if transmission was successful or 0x00 if not. Lower data rates is acceptable as reliability is more important for this application and internal library available from Mikroe can be used. A video of test setup and connection diagrams will be required for evaluation. Please feel fr...
Working on project that requires an email to be sent on certain conditions from pic chip (series 18 is preferred - 8 bit). To utilise microchip MRF24WB0MA preferred (and associated TCP, etc chip stack from Microchip. Hardware could be optional in offer but PIC18 and appropriate hardware is preferred. Utilising Mikroe Pro C is preferred, source code is to be provided as part of project. Lib would require such that information in of ip, stmp, pop, addresses, message is entered as appropriate and emails are able to be sent and received.
Working on project that requires an email to be sent on certain conditions from pic chip (series 18 is preferred - 8 bit). To utilise microchip MRF24WB0MA preferred (and associated TCP, etc chip stack from Microchip. Hardware could be optional in offer but PIC18 and appropriate hardware is preferred. Utilising Mikroe Pro C is preferred, source code is to be provided as part of project. Lib would require such that information in of ip, stmp, pop, addresses, message is entered as appropriate and emails are able to be sent and received.
...etc). When the USB is connected to power only, it will display the pictures in a constant loop. I have a pre-existing electronic circuit design using a PIC24. It is based on the MicroElectronika mikromedia for PIC24, in other words the code should work the same on both as the connections are the same. I only removed the extra parts that I was not using. I have attached a schematic for both the mikroE board and my board. Hardware description: It has a PIC24FJ256GB110, a microSD card, 8MB flash RAM, and an LCD screen with ILI9341 driver. Software requirement: as stated above I need the device to perform as USB MSD when connected to a PC/MAC, and digital picture frame when power only. I know that there are a lot of example code projects out there for each of these pieces separ...
...condition) then step 4 will be implemented, otherwise continue with step 3 and read the analog sensor every second whilst remaining in a low power mode. Step 4 – Send SMS If an alarm condition has occurred then immediately send an SMS message to the recipients cell phone number of the sensor voltage. Go to step 2 and wait for the switch press to re-arm the device. Hardware: At present the Mikroe GSM Click () is being used for the hardware, together with the Sharp GP2Y0E02A module () for the analog sensor. The hardware will not be supplied. Operation of the Sharp analog sensor is very simple, and it will be assumed that the developer has access to a Telit GL865-Quad module for
I need working firmware to control a electronic control valve using either a PIC 18F4450 or a 18F4685. The basic function should be controlling the position of the ETC using a potentiometer, very accurately and fast. The hardware available (for which the firmware should be intented): - MikroE EasyPIC6 development board - Siemens VDO ETC with Throttle Position Sensor (inverted signal 5-0V) - PIC 18F4450 or 18F4685 MCU - LMD18200 H-bridge Preffered compiler: MikroC Pro for PIC Attached is a simple firmware example which works, but gives to much oscillation (vibration) of the throttle valve. It is fast and well responding however.
Hi, I need help with project that includes mikromedia STM32-M4 and altitude click board which is connected using mikroBUS Shield for mikromedia. Project needs to show possibilities of altitude/pressure sensor: - switching between altitude and pressure readings using button on display - measurement of the height between the two points - time between measurement I can provide source code which can show altitude/pressure but I have to choose in the code mode for device. Best regards.
need some help communicating with a few micros I am can buss or spi
Project must be written for the Mikroe EasyPic7 development board with the PIC18F45K22 processor. Project must be written using the Mikroe C compiler. Read an analog voltage. Display the measured analog voltage on a PC, connect to the board via the USB interface. Display the converted analog voltage: 1V = 100 mA, 2V = 200 mA, and so on. Supply the mcppi file.
I need someone to research all the Medical Specialists located in South Australia, Australia and enter their details into a spreadsheet so I can do a direct mail campaign. I require details such as Name, Specialty, Address, and phone number. There are website such as this one that can give you the names quickly. http://www.doctoralia.com.au/healthpros/speciality/ophthalmologists-1718/south+australia-10497-0 The end result will be an Excel Spreadsheet with a list of specialists and there contact details. List of Specialists Allergy and Clinical Immunology Anaesthetist Audiology Breast Surgeons Cardiologists Cardiothoracic Surgery Clinical Genetics Complementary and Alternative Medicine Cosmetic Medacine Cosmetic Surgeons Dentists Endocrinologist Exercis...
A software written in MicroC (ATMEL microcontroller compatible with Philips P89V51RD2) to interface nrf24L01. Software must use acknowledge feature of NRF24L01 for reliable data transmission/reception. Only one byte will be transmitted/receive...transmitted by any slave so data can be differentiated from "n"). Work Flow (Slave): 1. Slave polls for "IRQ" and if "P" is received then transmits a byte. 2. Slave waits for an acknowledgement and function returns 0x01 if transmission was successful or 0x00 if not. Lower data rates is acceptable as reliability is more important for this application and internal library available from Mikroe can be used. A video of test setup and connection diagrams will be required for evaluation. Please feel fr...
...but I want you to convert it so it acts as USB HID keyboard and sends key "a" every second. You must have experience with USB and MikroC, If you can't prove your experience do not bid on this project. I will not reply to any bids that say "I can do it" just show me an example of USB HID implementation and you get the project. Note that you would need to install USB HID example from LibStock from MikroE website and change the project under C:UsersPublicDocumentsMikroelektronikamikroC PRO for PICPackagesUSB_Device_PICexamplesPIC18F87J50HIDDevice_Custom To download the USB hid library go to: Note: Do not use the USB library built-in the Compiler but use the library in LibStock as mentioned above. You would also
...fixed... I want to expand the extension with a better connection to Community Builder so that users who take tests can view results and feedback in their CB profile. I also want to add some Gamification functionalities to the LMS extensions, to see my view on gamification I made a presentation about it here: I may create photoshop PSD documents for design, buttons etc but if you have skills in design to make the website look better I am grateful for that. I imagine functions like these below but I am open to suggestions: User progress bar, different levels - connected to the amount of knowledge tests completed Top lists where users are shown in respect to other users, not just in a long
...ber/ on line 33 Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/tattoome/public_html/amember/) in /home/tattoome/public_html/amember/ on line 1718 Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/tattoome/public_html/amember/) in /home/tattoome/public_html/amember/ on line 1718 Deprecated: Assigning the return value of new by reference is deprecated in /home/tattoome/public_html/amember/ on line 130 Deprecated: Assigning the return value of new by reference is deprecated in /home/tattoome/public_html/amember/ on