Firmware for P10 display using Mikroe Clicker 2

Hello Good evening , I just finished reading the job description . I see you are looking for someone experienced in developing products using Electrical Engineering, Arduino, C Programming, Electronics and Microcontroller. This is something I can do, Please review my profile to confirm that I have great experience working with these tech stacks. While I have few questions: 1. These are all the requirements? If not, Please share more detailed requirements. 2. Do you currently have anything done for the job or it has to be done from scratch? 3. What is the timeline to get this done? Why Choose Me? 1. I have done more than 250 major projects only on freelancer.com. 2. I have not received a single bad feedback since last 5-6 years. 3. You will find 5 star feedback on last 100+ major projects which shows my clients are happy with my work. Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) My Portfolio: https://www.freelancer.com/u/AwaisChaudhry Please start the chat to discuss it further. Regards, Awais

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

Greetings thanks for posting the project here i am electrical engineer i have expertise in analog electronics systems, PCB designing and circuit designing. I can work on latest engineering tools to accomplish your task i.e., Multisim, proteus, Altium designer, in my experience i have successfully implemented number of projects in the field of embedded systems and analog electronics. My major expertise includes. 1- firmware development of microcontroller and microprocessor. 2- PCB designing and Analog Circuit designing. 3- Power electronics 4- IoT and automation 5- interfacing of sensor and actuators with microcontroller and microprocessor. 6- Simulation of electronics circuit design using Multisim, proteus, MATLAB, Altium designer. Please discuss the project in detail over chat, i am sure you will consider me for this task when you look to my portfolio. I will provide you the best quality work as per your requirements at reasonable budget. You can trust on me; your satisfaction will be my first priority. Looking forward at your earliest response. Best Regards Muhammad Adeel

Hello, I am good at PIC programming. I have microe C compiler ready to start coding for the project. Either we can derive the logic from your existing sketch or I can develop the code. I have knowledge of rs485 and 4-20ma

⭐⭐⭐⭐⭐I am senior Firmware & PCB Design,Java, C#,and C++ Developer ⭐⭐⭐⭐⭐ Hello I am Inigo H. I've seriously read your post and I have understood what you need. I am sure that I can be the best developer who can perfectly complete your project. I am a senior Firmware developer with 15+years of experience. I have rich experience in firmware development with ESP32 ,STM,ARDUINO,RSPBERRY and PIC,PLC,FPGA,etc. I also have rich experience GPRS, GPS, SMS, IoT I also have rich experience PCB Design. I have also rich experience C#,C++,QT,Java programming I have completed 100+ Projects over Freelancer with all 5 Star rating...without letting down a single Client....As Many Clients are still in touch based on my Working strategies and their satisfaction on their all previous Projects. I think it is necessary to discuss further over chat. Best Regards !

Hi need more information about the project I can design schematic, PCB and write the firmware for you I have experience working with Altium designer. I can send you some of my previous design with Altium I am an electrical engineer with expert in microcontrollers and circuit design Thanks

I am professional embedded system engineer. I have experience with Arduino. I can do the job for you . Drop me message to discuss more on the project. Thank you

⭐⭐⭐⭐⭐ Hello. Greetings for the day!!! As a Software Developer, I have 5+ years rich experiences working with C/C++, C#, Python and so on. I have full hands experience in this field. Give me a project and I'll discuss it in more detail and get started as soon as possible. Regard.

Hi, I know Arduino very well, and I developed many electronic device using arduino nano, uno, stm arduino etc. I used various kinds of sensors, and also TFT-LCD, 7-SEG Display, and so on. Sometimes I used motor, and other pheripheral devices. So I am sure this is really good fit project for me. Hope to discuss more detail soon. Thakns.

Hi Happy new year. I am a senior c/c++ developer and very familiar with firmware development. Can make perfect result in short time. Let's discuss more detail in chat. Thank you.

Hello mcabrini, I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Firmware for P10 display using Mikroe Clicker 2 plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

Hello I am interested in the project, I am a Mechatronic Engineer with five years of experience developing technological devices

I am an embedded systems engineer and I specialize in embedded software and real-time systems. I can provide you with my service and the realization of your project in record time. contact me by chat for more details.Thanks.

I CAN COMPLETE YOUR PROJECT EASILY Hello, I am programmer with enough experiences on C/C++, Qt, Python for 10+ years. C/C++, Qt, Python is nice programming language and I am majoring on it for long years so I have confident to complete your project by C/C++, Qt, Python. I can work by full time for your project and trying to satisfy the requirements. I am designing the project from scratch and structure it well. I am following the project's design process exactly, and if any error is found, fix it within 24 hours and provide maintenance free of charge for a month. Client's idea + Programmer's good coding is the perfect result, this is my idea. I want to keep long-term relationship for customer so I want to give the nice result. If you want the perfect result, please contact with me.

We have the experience of developing devices using PIC series and Atmega series. We have various technology of temperature and humidity control device, sensor contrl device, voice processing device. For developing PIC and Atmega use MPLab AVR Studio7.0. I am sure that we can make you satisfied with this projects. Please contact me.

Having experience in * PIC MCU * RS485 communication * C programming using XC8 for PIC MCU * Hardware, schematics and PCB

Arduino ve pic ile işlemler yapabiliyorum. Çok fazla ürün geliştirdim. Bunu da yapabilirim. Rs 485 ve dac kullandım

Hello, I am a mechatronic engineer, I have read your post carefully. I am a c++/c# and arduino, python expert with 4+ years experience. And I have a good experience in coding with Microcontrollers and Robotics. so i have developed a lots of apps similar to yours. I am sure I can meet it and complete it perfectly for you. I hope you discuss with me on chat. Looking forward to your response. Thanks.