We need a 3D animated video that shows leaking insulated pipe at a processing plant. This is an outline of what we would like to see. Please let me know if you have any questions. The video should start showing the Safety Warning sign attached as “img-1” shown on a large sign and play the voice file provided of the sign being read. Pan to an overview of a piping system at a processing plant and play second voice file provided. The pipes need to be insulated (White or Gray) and show no flanges. Zoom in to show one of the pipes. The pipe will be the focus of the video and should be displayed fairly large. Maybe 30% of the viewable area. The pipe will need to be dripping liquid and releasing a small amount of gas into the air. Play voice file we provide. The outer layer should go transparent showing swirling gasses and moisture around the inner pipe coming from a hole in the pipe as shown in “img-3” We then need to make the inner pipe transparent and show some of the liquid missing after the hole in the pipe ( try 50% ). The white ptfe pipe liner will still be intact. Remove the transparency. The insulation needs to roll up as in the attached image “Img-2” showing the damage insulation, moisture and gasses escaping.. The pipe and the insulation will need to look like it does in “img-3”. The pipe is PTFE lined and should be rusted with a hole in it showing the white liner just like in “img-3”. Play provided Voice File Fade screen to black and display provided Image. “Img-4” (to be provided after bid acceptance) Slide in 5 bullet points and play voice files provided for each. Go back to pipe view with insulation removed and pipe replaced with our pipe showing the layline ( see “Img-5” to be provided later). Must show pipe flanges on any bends in the pipe. Show the pipe transparent with no fluid loss. Play voice file provided and show URL and contact information provided.