Discharging battery simulink jobs
I'm looking to have an electrical diagram of an outdoor lighting system created. This system should incorporate: - LED lights (e.g., low-intensity for outdoor usage) - A battery that should power these lights uninterruptedly (small in size: not a car battery) - Both solar panels and a wind turbine to recharge the battery (both power sources would be a part of this system, and can automatically recharge the battery at any time based on whether solar or wind is available) - A way to monitor the level of charge within the battery at any given time Conditions for Charging: The battery should get recharged when there is an availability of wind or solar power. Skills and Experience Required: - Extensive knowledge about renewable energy systems - ...
I am looking for a comprehensive and detailed Causal Loop Diagram (CLD) for a rural microgrid system. This diagram should illustrate the relationships between various components and influences, highlighting the positive (reinforcing) and negative (balancing) feedback loops. Key Requirements: - The CLD should include essential components such as power source, battery storage, and load demand. - Illustrate key influences or factors that are critical to the rural microgrid system, such as renewable energy availability, weather conditions, and energy consumption patterns. Ideal Skills and Experience: - Expertise in creating Causal Loop Diagrams, particularly in the context of energy systems. - Understanding of rural microgrid systems and the dynamics of renewable energy. - Proficiency...
Seeking an experienced embedded firmware engineer to develop a robust firmware for a wearable device. The system should feature Bluetooth, Wifi, and LTE capabilities that will include implementation of new characteristics/features through these wireless technologies as well as battery optimization of the device Key Requirements: - The firmware should support Bluetooth, Wifi, and LTE technology for seamless communication with our broker and other devices. - The device is intended for wearable use, so the firmware should be optimized for this purpose. - The code should be efficient and lightweight, considering the limited resources of a wearable device. - A good understanding of Bluetooth technology, particularly in the context of embedded systems, is crucial. Ideal Candidate: - Pr...
...intermediate Matlab skills to help optimize the energy efficiency of a battery system for renewable energy applications. Key Project Requirements: - Optimize battery system for energy efficiency: The primary focus of this project is to ensure that our battery system operates with maximum energy efficiency. This involves assessing current battery performance and implementing improvements in its energy consumption. Ideal Candidate: - Intermediate Matlab Proficiency: The perfect candidate for this project should be proficient with Matlab, having experience in battery system optimization. Previous work in the field of renewable energy systems would be a bonus. The goal of this project is to enhance the energy efficiency of our battery system. You...
More Battery design. Same as before. Just new details... 7.4v 2200mAh 35C
...power on when movement is detected and remain on for a period of time, set within the app. A tilt/vibration sensor detects when the PCB moves and turns on the power. Key features of the Bluetooth device must include: - Alarm sound feature - press button on phone to sound a loud alarm on PCB - Flashing light feature - light flashes when alarm sounds - Show on-map location - Rechargeable battery capability - Battery charge status either within app or on PCB i.e. flash red LED on PCB when charge low Nice to Have - Show distance to PCB based on signal strength The app should be: - Compatible with both iOS and Android devices. Bluetooth Connection: - The desired Bluetooth range is less than 50 meters. Ideal Skills and Experience: - Proficiency in PCB design and software d...
...simulation model in MATLAB Simulink. The aim of this model is to study the performance of a Reverse Osmosis (RO) system. The specific requirements of the project are as follows: - **Focus on Energy Optimization**: The primary goal of the simulation is to optimize the energy consumption of the RO system. This includes analyzing its current energy usage, identifying potential areas for improvement, and implementing these changes in the simulation. - **Desalination Application**: The simulation will focus on the application of the RO system in desalination. While the primary focus is on energy optimization, understanding its overall performance in this context is also important. Ideal candidates for this project should have a strong background in: - MATLAB and Simulink sof...
I have an existing Arduino and BBC Micro:bit devices and I'm seeking a skilled freelancer to help me connect them for a home automation project. Key Responsibilities: - Implement a system that can control lighting, monitor temperature and provide security surveillance - Ensure the system can be powered using solar, wind, battery and be connected to the internet. The ideal candidate should have experience in: - Arduino and BBC Micro:bit programming - Home Automation projects - Solar and wind energy integration - Internet of Things (IoT) connectivity - Strong understanding of security surveillance systems Your role will involve setting up a reliable, efficient and user-friendly home automation system. The ability to integrate multiple power sources and ensure the system is in...
...has two primary functions: - Prevent thieves from shutting down the mobile phone: This is a critical security feature we are incorporating into the app. We need to make sure that the app is robust and capable of preventing unauthorized shutdowns of the device. - Provide customers with quick settings: The app should also have a user-friendly, accessible quick settings menu. This should include battery status, Wi-Fi settings, Bluetooth settings - essentially, everything that can be considered essential for quick and easy access. Ideal skills and experience for this job include: - Proficiency in Android app development - Experience with anti-theft features in apps - Strong UI/UX design skills - Knowledge of mobile device security best practices - Ability to create a user-friendly ...
I'm creating a project in Simulink that focuses on developing a modifed Fractional Open Circuit Voltage (FOCV) with PSO MPPT system for Solar PV systems. Key Points: - The project specifically requires expertise in Simulink for development of the MPPT system. - You need to be well-versed in the FOCV algorithm and particle swarm optimisation . - Your experience in working with Solar PV systems will be highly beneficial.
...phase display. The watch should be designed to run on a battery-powered system, and the display should be either a paper or LCD screen. Key requirements: - **Display:** The watch should feature a paper or LCD display that can show the date, time, and moon phase. The size of the display will be determined by the type of screen you select; please consider the optimal size for viewing these details. - **Power Source:** The watch should operate solely on battery power. - **Moon Phase Feature:** One of the key features of the watch is the moon phase display. This should be accurate and easy to see. Ideal Skills and Experience: - Previous experience in designing custom watches or similar electronic devices. - Proficiency in working with battery-powered systems and d...
I'm seeking a knowledgeable Arduino and IoT expert to create a sophisticated system for collecting data on water flow. Key functionalities required: - Pulse input data collection, specifically for monitoring water flow. - Understanding of Deep Sleep Mode to save Battery. - Data handling capabilities to efficiently send this information straight to the cloud system. The ideal freelancer for this project must demonstrate vast experience with Arduino programming, IoT systems, and data management. Familiarity with cloud technologies will be a significant plus. Ability to create a robust system capable of handling potential fluctuations in water flow is necessary. The chosen developer will be tasked with not just simple data gathering, but also with transferring these datasets t...
I am aiming to have a pi zero programmed to read voltage levels from a 12-volt battery bank. The trigger to start the generator should be a low voltage condition. The purpose of this project is to remotely start the generator, with a focus on maintaining efficiency and practicality through a direct physical connection. Key objectives include: - Programming the pi zero to accurately gauge low voltage conditions - Enabling the generator to automatically power up in case of a drop in voltage. - Continuing the generator input even after the voltage returns to normal, with this feature designed to maintain a steady and reliable power supply. Ideal Freelancer Skills: - In-depth understanding of Raspberry Pi Zero programming for hardware operations - Knowledge in direct physical conne...
... 1. Add the content we give you to the AED battery page 2. Add content we give you to the AED pad page 3. Create an AED accessories page. 4. Make all items "clickable" and avaiable for purchase so they can be added to shopping cart. 5. Other details will be shared as we discuss the project in greater detail. - I'm keen on enhancing the overall navigation and user experience of the site. This involves improving its ease of use for visitors. I believe a smooth user experience will make the site more effective in achieving my goals. - I also need to have content added to existing pages. Particularly, I'm targeting the AED pad page, the AED battery page, and the AED accessories page. I'd like this content to be not only informative, but also
...methods is required. Previous experience with PI tuning is beneficial. Currently, MATLAB/Simulink is being used for modeling and system simulation, hence proficiency in it is crucial. Ideally, the candidate will have extensive experience using MATLAB for complex motor control simulations. However, I haven't defined the specific tuning methods to be used which leaves room for a range of strategies. The right candidate may suggest an efficient solution based on their past experience and knowledge. Overall, I am looking for someone to impart a level of dynamism and precision to the motor control that it currently lacks, by better tuning the PI controllers. Skills required: - Proficiency in MATLAB/Simulink - Solid grasp of field oriented control - Experience in PI tu...
I am looking for an expert with solid experience in Field Oriented C...an expert with solid experience in Field Oriented Control (FOC) of Permanent Magnet Synchronous Motors (PMSM) who can help tune my PI controllers for more precise speed control. Here are the specifics: - I have an established model using MATLAB/Simulink, and the PI controllers are already implemented. - The key outcome I want is to enhance the accuracy of the speed response. The ideal candidate will have: - Extensive knowledge and experience with PMSM and FOC. - Proven background in tuning PI controllers. - Strong proficiency in MATLAB/Simulink. Your task will involve analyzing the existing model, suggesting enhancements for the PI controllers, and implementing these changes to achieve a more precis...
...here's a detailed plan based on your specifications. Specifications Recap: PCB and Battery Dimensions: 33 x 40 x 10 mm AirPods Pro 2 Dimensions: Height (H): 30.9 mm Width (W): 21.8 mm Depth (D): 24.0 mm Design Requirements: The case should connect to the top and be formed like a butterfly. The two circular charging metals at the bottom should be positioned to the left and right. The part of the AirPods Pro 2 that goes into the ears should stick up 15 mm above the case. Steps to Create the 3D Model in Blender: Set Up Blender: Open Blender and delete the default cube. Model the Charging Case: Create the Main Body: Press Shift + A to add a new mesh, select Cube. Scale the cube to the dimensions of the PCB and battery: Press S to scale, then X, Y, and Z to scale along ...
...create a display of GPS coordinates, IMU data, and set the frequency for a TBS satellite receiver on a 7inch LCD screen. The components for this project are: - GPS module - IMU module - TBS satellite receiver The LCD display should show GPS coordinates and IMU data in real-time. It also needs to set the frequency for the TBS satellite receiver. The Raspberry Pi setup will be powered by a battery, so considering power consumption in the build is important. Ideal skills for this job would include: - Experience with Raspberry Pi integrations - Familiarity with GPS modules and IMU modules - Knowledge of frequencies for TBS satellite receivers - Proficient in power management for computer systems, particularly those powered by batteries. Please ensure your bid includes your ex...
Re-Design and Add to our Product Labels (See Attached Examples). Use Different Golf Cart Pictures And/Or Colors To Differentiate Between The Different Models. Each Label Will measure 5 Inch (127MM) Height x 8 Inch (203MM) Width. Key Points For Each Label Are: CanLiFe Lithium Golf Cart Battery * A Single Drop In CanLiFe Lithium Battery Replaces An Entire Set Of Conventional Lead Acid Batteries & Can Operate A Stock Golfcart In Any Terrain. * Assembled In Canada * Backed By A 6 Year Limited Warranty * Estimated Range And Capacity To Be Displayed Prominently * Bluetooth Enabled - Monitor State Of Charge From Your Phone Total of 12 Labels to be created: Front Plaques: CanLiFe Lithium Golf Cart Batteries 36 Volt 56 Amp Hour (2.07 Kilowatt) Capacity 25-30 Kilometer Ra...
I need an electronic hydrometer to measu...undercharging. Key Features: - The hydrometer should have a standard accuracy of ±0.01. This level of precision is essential to correctly assess the battery health and predict any potential issues. - The data collected from the hydrometer needs to be available through a web interface. This online access will allow me to monitor multiple batteries from a central location, offering more convenience and control. Ideal Skills and Experience: - Experience in designing and developing electronic hydrometers or similar IoT devices. - Proficiency in interfacing such devices with microcontrollers. - Data should be passed to serial port of controller - Understanding of battery health and the importance of specific gravity measurements ...
My current website needs updating. It's an electrical, solar, battery, and EV charger business site, and I'm looking for an experienced web developer to update the site using Bluehost and WordPress. The job will involve the following: - Updating Content & Photos: The site's content and images need to be refreshed to reflect my business's current offerings. - Redesigning Layout: I want the website to have a fresh, modern look that aligns with the services I provide. - Adding New Features: I'm open to suggestions here. A few ideas could be online appointment booking system, product catalog, or live chat support. Additionally, there are a few key areas where I'm seeking recommendations: - SEO Enhancements: The site should be optimized for search eng...
...intermediate Matlab skills to help optimize the energy efficiency of a battery system for renewable energy applications. Key Project Requirements: - Optimize battery system for energy efficiency: The primary focus of this project is to ensure that our battery system operates with maximum energy efficiency. This involves assessing current battery performance and implementing improvements in its energy consumption. Ideal Candidate: - Intermediate Matlab Proficiency: The perfect candidate for this project should be proficient with Matlab, having experience in battery system optimization. Previous work in the field of renewable energy systems would be a bonus. The goal of this project is to enhance the energy efficiency of our battery system. You...
I'm seeking a skilled professional in Matlab, Simulink, and HDL Coder, with a profound understanding of FPGA, particularly the Kria SOM platform. Key Project Details: - The primary goal is to implement an Object Detection DNN on the Kria SOM FPGA. - The approach is real-time video processing, hence the need for efficiency and speed. - The system should be based on the YOLO model, which is pre-trained on the COCO dataset. - The FPGA resource utilization should be analyzed using HDL Coder by running the FPGA in a loop with MATLAB. Ideal Candidate: - Proficient in Matlab, Simulink, and HDL Coder. - Experienced in implementing DNNs on FPGA, particularly Kria SOM. - Knowledgeable on real-time video processing. - Familiarity with the YOLO model and COCO dataset. - Capable of...
...Key Requirements: - I want the trailer to be equipped with high-quality dog grooming equipment, Which I know what I am using. The design should be such that it can accommodate multiple dog's needs. - A proper water supply and drainage system is a must, ensuring efficient water usage and waste management a storage tank both clean a dirty. - The trailer should have enough storage space for a large battery-powered solar on top invertor siding that comes off during the summer and glass walls that go on during the winter. - The design should be appealing to pet owners while keeping in mind the practicality and functionality needed for a grooming service. Skills and Experience: - Proficiency in industrial design with a focus on mobile units. - Knowledge in pet grooming industry a...
...Source code with clear and concise comments. 3. Documentation on installation, configuration, and usage. 4. Example project demonstrating the plugin in action. 5. Support for initial setup and troubleshooting if needed. Additional Requirements: - The plugin must be developed in accordance with the best practices for PhoneGap/Cordova plugin development. - The plugin must not cause significant battery drain or performance issues on the device. - Clear communication and regular updates on the project progress. - The final deliverable must pass testing on both Android and iOS devices. Ideal Skills: - Proficiency in PhoneGap development. - Prior experience with WebSocket handling and background notifications on Android and iOS. - Strong understanding of mobile app development prin...
I'm in need of a skilled circuit board designer that can create the and design the Greber file for me, I need to send the files to the manufacturing compony. My project contains few components only. SAM D11C 14-pin chip, 3 LEDS, Battery holder, and a reset switch. The "j2" pads are for programming the chip, Gnd, power, and clock. The 2 antennas traces are connected to analog pins A2 and A4. LEDs are connected to digital pins 24,25,31. the reset button to RST pin of course. For the 4 programming pads. Gnd and Power goes to Gnd and VDD pins in the chip, For the clock, I'm not shire which pins. layout size : 10 cm by 5.398 cm
I'm looking to sell a residential solar photovoltaic (PV) system that stands out for its energy storage capabilities and off-grid independence. The estimated space for installation is a medium-sized residence (1,000 - 2,000 sq ft). Ideal skills include: - Expertise in solar panel design and installation - Knowledge of battery energy storage systems - Understanding of off-grid solar systems - Experience with residential projects - Ability to estimate solar power needs based on space size Offer your skills to make this solar PV system stand out in the residential market.
I require a bespoke drive thru simulator application that will function on Windows. This app will assess the performance of a headset in a realistic 4 lane drive thru environment. It should have the ability to autonomously run overnight, connected to the headset. Necessary tests include various factors, such as: - Audio quality - Connectivity - Battery life The system should provide comprehensive reports concerning any faults or failures with the headset based on the tests. Experience in acoustic engineering, application development, and system testing is crucial for this project. Real-world drive thru scenarios must be accurately simulated to ensure real-life performance of the headset is effectively assessed.
...intermediate Matlab skills to help optimize the energy efficiency of a battery system for renewable energy applications. Key Project Requirements: - Optimize battery system for energy efficiency: The primary focus of this project is to ensure that our battery system operates with maximum energy efficiency. This involves assessing current battery performance and implementing improvements in its energy consumption. Ideal Candidate: - Intermediate Matlab Proficiency: The perfect candidate for this project should be proficient with Matlab, having experience in battery system optimization. Previous work in the field of renewable energy systems would be a bonus. The goal of this project is to enhance the energy efficiency of our battery system. You...
I'm in need of a proficient Simulink designer to assist me with a PID Control System Design project. The focus is on Position Control System. The project requires the following: - Expertise in Simulink and control system design - Knowledge of PID control development and its application in Position Control System and Car suspension Skills & Requirements: - Proficiency in Matlab and Simulink - Advanced knowledge in Control System Design - Prior experience with Position Control Systems and Car suspension - Extensive experience with PID control and electrical actuator Your task would be: - Design a PID control for a position control system - Implement this design in Simulink - Test and refine the system to ensure accurate and optimal performance. I ...
...looking for an expert in Simulink and PID control systems to develop a model for the active suspension system of a vehicle, with a particular focus on using electromagnetic actuators. While I'm not completely certain about specific performance targets, I would like the model to be versatile enough to prioritize either ride comfort or handling performance. The base model is provided, this is missing an actuator and the PID controller which is required by you. Expected deliverables: - A thoroughly tested and validated Simulink model for the PID control of an electromagnetic actuator based active suspension system as mentioned in the document. Ideal skills and experience: - Extensive knowledge in PID controls, specifically for suspension systems - Proficiency in Si...
I'm currently seeking a professional with experience in Battery Management Systems (BMS) to design and develop a LiFePO4 BMS. The key requirements and features include: - BMS should support 8S and 4S configurations - Maximum amperage capacity of 100A - The ability to alter the BMS ampere capacity by adding or removing MOSFETs or any other relevant hardware as required - The BMS should include essential safety features such as: * Temperature monitoring * Short circuit protection * Cell balancing * Reverse polarity protection - The system should allow for charging and discharging through the same port I need this project to be completed within a month. Ideal skills and experience for this job include: - In-depth knowledge and experience in BMS design, particu...
...implementing IoT solutions in the supply chain - Analyze the impact of IoT on the supply chain for lithium-ion battery production Ideal Candidate: - Extensive experience with IoT and its applications - Proficient in Python development and cloud data management - Comprehensive understanding of supply chains, specifically in lithium-ion battery manufacturing - Familiarity with PLC & SCADA, Edge Computing, wireless sensors and gateways - Strong research writing skills to aid in the comprehensive explanation of findings - Knowledge of MATLAB and Statistical Analysis tools would be an advantage. Your contribution could profoundly impact the efficiency and resilience of lithium-ion battery supply chains. Your work will not only provide immediate value to this resea...
...alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibre-optics to transfer the light from the LEDs to various lenses on the fire truck. The LEDs should flash alternately. - Control Motor: Apart from the LEDs, the circuit should also be able to control a small 3-4 V motor. A potentiome...
I'm in need of a basic conceptual model for an Engineering project using Matlab Simulink. Key Points: - The task involves creating a basic conceptual model. - The domain of the project is in Engineering. You might be working with structures, mechanical systems, electronics or similar. - The model doesn't need to be overly detailed or complex, it just needs to demonstrate the concept. Ideal Skills: - Strong understanding of Engineering concepts. - Proficiency in Matlab Simulink. - Ability to translate complex ideas into simple, clear models.
I'm looking for a skilled programmer who can create a battery level indicator program for an Lithium Battery. The program will be used to interpret battery level data and display it via LED indicators. Key Points: - Device: The program is specifically designed for an Lithium Battery; thus, knowledge of embedded systems is must needed, which includes both Hardware & Software Design - Programming: Proficiency in C/C++ is essential for this task as it is the preferred programming language. - Display: The battery level will be depicted through LED indicators. Experience with LED technologies or similar display systems is advantageous.
Wiring Schematic of an Agricultural Articulated Truck (Tractor), new project needs schematic and design. Key Components: Power Supply: Battery Alternator Main Circuit Breaker Lighting System: Headlights Tail Lights Work Lights Indicators Control Systems: Ignition Switch Dashboard Controls Relays and Fuses Engine and Transmission: Starter Motor Engine Sensors Transmission Controls Hydraulics: Hydraulic Pump Controls Joystick Controls Hydraulic Solenoids Auxiliary Systems: Air Conditioning Horn Wiper Motor Fuel Gauge
...devices you’ll need a system to digest and understand all of the data coming in -Comparing fleet tracking devices Functionality Technical specifications Cost -Choosing fleet tracking devices for specific applications Plugin Hardwired Dashcams Rugged/exterior mounted applications - construction, landscaping, etc. Remote deployments Battery powered Solar powered Kill switches Temperature sensors -Is it legal to install fleet tracking devices in my vehicle? - Disclaimer: we cannot give legal advice, seek professional advice for your particular situation - in most states where the company owns the vehicle, yes...
A detailed technical explanation will be given about a block whole designed using Matlab simulink.
I'm searching for a CAD designer to help create a Lithium-ion battery module which will later be used in a radio. The primary goal of this project is to design a battery module that possesses the following characteristics: - Lithium-ion: The battery module should be based on lithium-ion technology - Prismatic: The battery should have a prismatic shape. This is to ensure it can be integrated seamlessly into the radio design. I'm looking for a CAD designer with experience in battery module design. Experience with lithium-ion batteries, prismatic batteries, and if possible, relevant experience with radios would also be beneficial. The designed battery module should have a capacity of 1000mAh. If you're interested in this project, I&...
...the athlete during a game or training session. - Speed Metrics: Monitoring the speed at which the athlete is moving during different phases of the game. - Acceleration and Decelerations: Recording sudden changes in speed to analyze the player's agility and response times. - Heart Rate Monitoring: Capturing the athlete's heart rate to gauge their exertion levels during play. Ideal Battery Life: - The desired battery life for the device is up to 8 hours. It should be able to sustain continuous operation during a typical training session or game. Future Application: - While the initial focus is on soccer, the device should be designed with flexibility to be adapted for other sports in the future. Skills Required: - Proficiency in GPS device design and prototyping...
I require a 10-page paper that focuses on comparing the transition to hydrogen internal combustion engine vehicles with electric/battery-powered cars. This paper should thoroughly explore the environmental impact, cost-effectiveness, and overall performance of these two types of vehicles. Key Areas to Cover: - Environmental Impact: The freelancer must analyze and present a detailed comparison of the environmental impact of hydrogen and electric vehicles. - Cost-Effectiveness: The paper should investigate the cost implications of transitioning to hydrogen internal combustion engine vehicles in comparison to electric/battery-powered cars. - Performance Comparison: A crucial part of the paper will be to comprehensively compare the performance levels of these two types of vehicl...
I'm in need of a skilled professional with extensive experience in MATLAB-Simulink to assist me in simulating DC arc faults in a photovoltaic (PV) system. Key Project Details: - The primary purpose of the PV system is power generation. - I need the simulation to provide details on basic electrical parameters and arc dynamics. - I need the simulation using different arc models (Cassie, Mayr, Habedank, Kema, Paukert, Modified Paukert, and Heuristic model). - The Pv system should be connected to the grid. - The Pv system should have a dc-dc converter and inverter. The ideal freelancer for this project should have: - Strong expertise in MATLAB - Simulink - Experience with simulating electrical systems - Familiarity with photovoltaic systems would be a plus - **Fault Durat...
...light. - Once the Arduino detects that the warning light is on, it must signal for another light to blink. -I want to splice into another warning light on my car instrument panel and use the power feed on that as my input signal for the arduio - I prefer the blinking pattern to constitute 5 blinks, followed by going out. -I can power the board from a 9v battery if using the voltage from the car is too dicey. I don't mind if the battery runs out quick - Final output should be a detailed project scheme, the respective Arduino code for this light blink setup, and instructions on how to assemble...
...with the primary goal being to increase manufacturability. The improved design should reflect in the product's portability, energy efficiency, resistance to weather, and extended battery life. Ideal Profile: - Experience in Product Design - Understanding of Efficient and Durable Design Principles - Knowledge of Power Management for Electronic Devices Your role will involve: - Reengineering the product design for better manufacturability without compromising on aesthetics or functionality - Incorporating features that improve portability, energy efficiency, resilience to weather conditions - Enhancing the battery life of the product. Your contribution will significantly shape the efficiency and user-friendliness of our high-demand enterprise advertisement product....
***PLEASE NOTE I AM NOT INTERESTED IN RANDOM DESIGNES FROM OTHER BUSINESSES - I WILL BLOCK THE FREELANCER - ONLY SUBMIT DE...Title of position within company: Car Electrician The card should also have space for: Phone number xxxxx email xxxxx Location : City XXXX The card should also show some information regarding services we offer which is: - Key Programming & Cutting - Unlocking Hidden features - Diagnostic & EML clearing - Software & Module updates - Retrofit Equipment - Engine Tuning DPF, EGR & IMMO solutions - Battery Registering - ECU Cloning - Airbag Programming - ****PLEASE NOTE THE FINAL DESIGN WILL NEED TO BE IN 2 LANGUAGES TRANSLATION AND OTHER INFORMATION WILL BE PROVIDED TO WINNING DESIGN***** design is to remain same just the text / logo will be tran...
...implementing distributed secondary control using Simulink. I want you to simulate this project in Matlab Simulink. I will need the simulation files as well. - The main purpose of the project is to ensure the stability and reliability of the microgrid through an effective distributed secondary control mechanism. - The microgrid comprises of Solar PV, Generator, and a Battery storage system. - The primary power quality issues that require addressing are related to voltage and frequency. - I'll need you to explain the project design once you are done on zoom call or something as I need to write my thesis on this so I'll need know all the details about the project. Ideal skills and experience for this project include: - Proficiency in Simulink for...
I'm looking for a 5kW solar inverter specifically designed for residential usage. It should be equipped with a battery backup system to ensure continuous power supply during outages. Key Requirements: - 5kW Power Output: The inverter should be capable of handling 5kW of power, suitable for residential usage with inductive loads. - Battery Backup Compatibility: It must be designed to work with a battery like lead acid and LifePO4 battery of 48V which will be a 16 string LifePO4 battery.. This is crucial for ensuring uninterrupted power during times of outages or low sunlight. -Tgere whouxl be an lcd screen to do settings and check status. - Residential Suitability: The inverter should be designed for residential environments, taking into account fa...
I'm in search of a skilled developer who can help me design a Battery Management System (BMS) for Lithium-ion batteries. The primary functions of the BMS will be to monitor the health of the battery, control its charging and discharging, and ensure its safety. Key Requirements: - Experience in developing Battery Management Systems - Proficiency in Bluetooth communication protocols - Understands the specific needs of Lithium-ion batteries and how to optimize their performance - Capable of integrating safety features into the BMS to prevent incidents like overcharging or overheating The successful candidate will need to be able to work closely with me to understand the specific requirements of the BMS and design a system that meets these needs. The ability ...
