CAD/CAM Jobs

convert hand drawn scaled drawing to sketchup or Revit. Need floor plan and elevations

We sell Pneumatic Automation parts, and need to find mechanical engineering to get an information about specific items in an automation field, and would preferred to be in Canada.

I need a structural engineer for one calculation. I have a window ready to put in an exterior of the property however I have a picture attached there are two beams holding floor level upstairs running above where I will be putting the window therefore I need structural calculation building regulation but I need a fast car somebody help please. The skin of the building is a double layer brick with no cavity as we have already investigated. This job will 100% lead onto more work builders in the Melton area and look after high-end clients. My old Structural engineer is retiring so I’m looking for a new one. All my work is done just a handful of clients and I’m busy all year round with no breaks for the team builders in the LE14 area on the vail of Belvoir and surrounding Regard...

I have a dwg file. In that file there is a red box and some yellow lines. I want a lisp file that aligns those yellow lines perfectly with the red bounding box. The sample is also shown in the AutoCAD file attached. Please remember that I want a code which is a Lisp file. So when I will load that lisp file in my drawings it will automatically correct all yellow lines. Bid only if you know how to generate a lisp file in AutoCAD. You will probably need to code a little bit.

We need a drawing to submit for our backyard redesign. That involves a patio and retaining wall. We need drawings to meet local building code requirements for a permit.

Training pilot project for future development

We require an experienced and skilled person to create fully dimensioned and scaled plans of a commercial property. Requirements are: The boundaries and dimensions of the site. Adjoining roads The location and layout of all existing and proposed buildings and uses proposed on the site, Internal layout and details of the buildings and the total floor area to be occupied by the proposed use/s or activities. The proposed use of the components of the buildings, All driveway, car parking and loading areas; Proposed landscaping areas; All external waste storage and waste treatment areas; Location of all signage on the site. Please provide examples of previous works to be considered.

ive created a cardboard template with all the measurements, i just need my logo put on it an it turned into a cad file so that i can have it cut out on plasma table

I have modified an existing reclining sun bed out door chair called zero gravity chair the modification is made for the beauty trade to treat customers more effectively. all measurements and changes are on documents and video of prototype is there. i have posted samples of other chairs that have a cosmetic apperance and also a sample of a beauty bed that currently is used.. the new reclining chair will be a better version lighter easier to flat pack for assemble.. yet sturdy for heavier clients in the US, and visually appealing to suit upmarket salons, an add on cushion accessory will be added later to cover chair, Ideally our team will be looking for long term ongoing work with chosen Artist. CAD must be clear for engineers to see how the changes are made. to create the new version of thi...

I have two commercial spaces I need simple drawing made. Quickly.

I have two commercial spaces I need simple drawing made. Quickly.

Seeking someone experienced in filing and designing SD1 and SD2 and Cross Connection MEP Plans in CAD and filing in the NYC DOB and DEP.

FLOORPLAN to blueprints. I need foundation plans, framing plans, and elevations.

I'm looking for an experienced Autocad Electrical expert both in 2d and 3d to help me learn it from scratch to a proficient level for designing, drawing, and documentation in Autocad software

I have boiler data sheet and need bill of quantities according asme sec i You shall calculate the thicknesses and tubes Bill of quantities is required for estimation

I want to get someone that has the business or the skills to be a blessing to build me prototype ??? I need rubber that's like the human skiable for men to be able to use it and be able to look like its there own body part. I need it to be able to urine to ill post a current model of one I. want one the same but I want it even better I need it to be designed so that itgoesover mens actual penis a nd so people can't see it at all some sort of glue that will come straight off ? or some sort of elastic system ??? what ever u can think off and that you'll be able to make for me ??? let me know ideas and prices look at my pictures before u reply to me or make an bid please

Need existing floor plan redrawn to account for wall thickness.

I have a original komet k30 135cc kart engine case. Looking to create a cnc cad program to reproduce this engine case in polystyrene.

Shop drawings and Load calculations required for steel staircase which is to be fabricated for a small villa ,. I will give the member sizes.

I need a few pages copied and updated. This project will start with one page and may go on to more. I need someone that has experience and is efficient in drafting plans for residential construction.

Hi, I have a construction company and we are dealing in buildings and structural works. We have many new construction workers coming in every month and some of them have no experience in this sector. I need them to understand and be trained properly before we can deploy them to the worksites. I need someone to assist me in creating a Construction Training Plan that covers all construction aspects. Thank you.

i want a autocad designer to create skeleton for the file uploaded.

Hi, i have a rough sketch on paper the layout plan and also the different sides of the houses. Needed an autocad drawing so to be able to calculate the quantity of materials efficiently. I have a total of 5 sets of drawings here, houses from 400sqft to 1300sqft. Thank you

We need a 3D Mock up for our new restaurant. We have already the CAD File and materials, colors details. Just need the drawing.

Hi. I am an Interior Design who needs additional support with CAD drawings. These specifically would be of joinery, floor plans and elevations of both. Applicants must have at least three years experience and must be able to work quickly and precisely. I also require a portfolio of past and current work, along with references. I am after someone who I can use for repeat work if the work presented is up to standard.

We need to push back a kitchen wall to the garage area, another wall of the kitchen, back to the back yard with added foundation and also extend a room located on the garage to the end edge of the garage. We need assistance in architectural planning set for the permit obtainment process. Please provide us with your estimates and offers.

I need an engineer/draftsman how can design and draw a full water supply and drainage for a Villa in Autocad

draw an existing floor plan , new modified floor plan, sections & elevation

Looking for someone to add to my architectural design the materials structural design must be licensed in Georgia USA

I need plans drawn for a rehab home I have in Macon GA. need something for my contractors and the county to go by. I have a rough sketch of how I'd like a property remodeled but need it drawn to scale + elevations, roof, foundation, sections, etc Freelancer needs to provide a US seal deadline is within 7 days and budget is $700 max

Woodworking Shop looking for a fabrication designer. AutoCAD, Solidworks, Freehand

We are going to work on our new office project and we have some 2D plan and we need some alterations in that.

Simple mechanical lock, it’s not complicated I need the design in solidworks 2018 or less My budget is 10$, because the design is easy

I need you to design a 9 seperated ground solar systems on 9 piece of land at the same location (beside each other) I have the area of each land and the location *Topography is neglected as the site view *Shadow is a must by sketch up *Simulation on pvsyst is a must The output needed is 1- sketch up simulation for the systems and shadows 2 - Pvsyst simulation and reports with no error lines with source files 3- written report showing the process of work and the items selection method for inverters, panels ...etc Quality work is a must

I am looking for a skilled CNC programmer to fixture and program part for a horizontal cnc machine. this person need to have the ability to create blueprints for the fixture as well as work within a defined tool library for the programing of the machined parts.

I have a boat design I need in Autocad, for detailed drawings for manufacturing

I'm an architect in South Florida and need a structural engineer to help with calculation for wind and gravity for residential projects.

I want modeling in catia or solidwork resin sheet modeling (not sheet metal)

I want to make cooler body designs using AutoCAD

To complete a full set of architectural documents for construction consisting of for a new 8 story apartment block. Freelancers must possess skills in architectural construction detailing for residential projects. NON ARCHITECTURAL DRAFSTMAN AND DESIGNERS SHOULD NOT BID. EXPERIENCE IN ARCHITECTURAL DRAFTING AND CONSTRUCTION DETAILS A NECESSITY. Below is an estimated list of drawings that will be either provided (excluded from quote) or will need to completed (to be quoted): CD01 PLAN - site plan - PROVIDED CD02 PLAN - basement 2 - PROVIDED CD03 PLAN - basement 1 - PROVIDED CD04 PLAN - ground floor - PROVIDED CD05 PLAN - level 1 - PROVIDED CD06 PLAN - level 2 - PROVIDED CD07 PLAN - level 3 - PROVIDED CD08 PLAN - level 4 - PROVIDED CD09 PLAN - level 5 - PROVIDED CD10 PLAN - level 6 -...

Required to develop Steel reinforcement detailing drawings for a RC commercial building in Nellore, India. Total CFA: ~10,000 No. of floors: Semi-Basement+3 floors

I am looking for an engineer to design retaining wall sections for a project in Atascadero California. Engineer must be licensed in California. TW and EG called out on the civil plans. Typically need walls in 2' increments usually starting at 3', 5', 7' or 4',6',8'. Assumed to be asphalt driveway between the retaining walls on either side. Active pressures with increases for back sloping is in the soils report. Needs to be loaded for a fire truck, typically 250 from what I've seen.

I am wanting engineered plans showing flow calculations, friction loss, pipe layout and sprinkler locations for a residential 13D fire sprinkler system. The house is 640 sq ft which includes a 20ft x 20ft lower level with a 12ft x 20 loft. I am familiar with code and will provide locations and number of sprinklers and schematics of the home which were created in SweetHome3D. Thank you

Have a house plan in cad that i would like converted to 2d drawings had drawn a few years ago but want some design changed made that reflect updated to the original files

May need engineer licensed in Arizona for this small house. To fab with Insulated Concrete Forms (IFC). The brand of IFC to be FoxBlocks. This is a 1 bdrm, 1 bath. 16 feet wide by 20 feet long with concrete slab and Gable metal roof. Attached is proposed floor plan. Soil report available, if needed. Please let me know if you are able to help me and what the approximate cost maybe. Bob W. [Removed by Admin for offsiting - TOC Section 13]

I need someone who I can come to that can create drawings for me, would be helpful if they were familiar with AutoCAD. I am an interior designer and need someone I could hire for multiple times.

Have already done plans for a commercial Fitout. Just need some minor changes done as our draftsman is away

Im looking to build a house that i can also rent as a chalet and looking for the best designs and most sustailability. Floor plan should be considered also and looking for work as professional as possible with new ideas that can make me get the best out of this house.

I need a full set of architectural drawings for a CrossFit Gym. I have a drawing of the floorplan that I would like to use. I will attach. I would like to use an engineered metal building. The size of the building that I would like is 75 foot wide and 70 foot deep with a roof pitch of 3:12. Hope to hear from you soon.

Our company is looking for person who can do autoccad drawing tasks such as shop Drawings, fabrication, as-builts drawing, 3d drawing, etc