Automatic Sanitizer Dispenser Circuit using Micro-controller
₹1500-12500 INR
Closed
Posted almost 4 years ago
₹1500-12500 INR
Paid on delivery
We want a Sensor based Controller Card for Automated Sanitizer Dispenser Machine, Card should be robust and economic too, We need Pump to start when Hands detected and dispense the Sanitizer, if Hands are in Sensor proximity range for longer time then Dispensing will cut-off automatically at preset duration which should be adjustable between 200ms to 15 Seconds using a potentiometer or preset, The sensing distance has to be adjustable through Pre-set, if the person need more Sanitizer to be dispensed from the Pump then he has to remove hand and represent again within the Sensor range, we want to integrate 3 different types of Sensors (HC-SR04 Ultrasonic Sensor Module, IR LED RxTx Pair, TSOP1838 Photo Sensor) with this controller Card, All sensors option should be available, we will choose different sensor depending upon different requirement or models of Machines but the Card will remain same for all the Sensors, Number of Indications are required (i.e. Power On LED or Standby LED, Detection LED, Cut-Off LED, RGB LED when Dispensing), some other important features to be developed (i.e. Over Load protection and Indication, Reverse Polarity protection, Short Circuit protection) We want to get this developed around low cost MCU, such as STM8S003F3, PIC, Atmel, Renesas RL78/G11, We prefer using STM8S003F3 it’s low cost and easily available, rest all MCU’s are short in market no a days.
The Scope of work will be: Coding of MCU, Schematic, PCB Gerber File for Fabrication and Production.
Things to take care of: Minimal Components used, Low-cost Devices, PCB Size to be small, All components should be Through Holes, MCU to be SMD.
Hello,
I can develop a circuit based on PIC12F675 to perform the Sanitizer Dispenser that you need, please contact me so we can discuss the details of the project.
Best regards,
Best PCB Design Expert at your doorstep!
Dear Client,
I couldn’t stop myself from bidding after going through the description as they are an exact match with my skillset and experience.
I have experience in Ethernet and USB based PCB design and know all the intricacies required to get the job done with perfection.
With more than 5 Years of experience in PCB Design and Circuit Design in Altium, I can ensure you best quality work and before time delivery.
Following is a brief list of expertise that I am carrying:
1. IOT products development
2. Microcontrollers based circuit design – STM32, STM8S etc
3. Smart Products like Smart watch - GSM/GPRS/GPS etc
4. Wireless Products - BLE/WiFi- ESP32/ESP8266/NRF24L01
5. Low Power Battery Products design – Rechargeable and Non chargeable
6. Power Electronics – Buck, Boost, Flyback etc
Please answer the following questions:
1. What are your future plans with this project?
2. Are there any specific market standards like CISPER you are aiming?
3. What will be ambient temperature of this product?
4. Are there any other specific requirements besides the ones you mentioned
Let’s have a quick discussion for 5 mins where I would formulate a plan of action of how we shall take this project to the horizons of success.
Regards
Pratibha(Nickname -Avi)
Quality is never an Accident
Dear Sir,
I am an expert with more than 20 years of experience in firmware development, programming and PCB Layouts. I have checked the details of your work.
This can be realized with any 8-bit MCU especially PIC. I assure you a working model for your project. I am online and available for discussion.
Regards
Talha
Hello! I have already made this dispenser. Kindly come over chat and plan the project for the same.
I had user arduino nano that cost 210inr. I have already prepared code for it.
hello dear,
i am an Electronic Engineer with experience in embedded system designing and i have read your requirement and i can asure you it can be made in just one day.
Hi,
I have the PIC micro controller board with relay, Ultrasonic sensor and IR sensor readily available and can start your work based on your requirement.
you want custom PCB board to be developed?
We can discuss..
Regards
Senthil
Chennai
I can create the whole design for you. I can also help with manufacturing and component sourcing for Indian vendors itself.
I am more interested in Licenced deal, where I get some kickback for every unit sold. Or I can develop the PCB and manufacture the PCB and you can buy it from me, in this case, you don't have to bear the cost of development nor you have to worry about manufacturing.
If not the design and development cost will be higher than the bid amount.
I am based in Pune. Would like to discuss more the project and scope.
Hi, I can do what you exactly want. Just a few days back I have done a similar project related to design a system with minimal components to use ultrasonic sensor and RF modules. If you need I can send you images. I can definitely do your projet.
I think you need both circuit design and software support from me.
I will deliver the Circuit simulation + PCB design + Grabber file + codes and hex files for the controller.
It will take around 10-15 days max and the total cost will be 15000 INR.
I have 3 years experience in Iot and embedded systems and have worked good hands on both hardware and software.
I have worked on many projects that are as follows:
Smart lock based on esp8266
Smart water management system based on esp8266 and AWS server
Smart energy meter solution
Smart curtain controller
all the above are based on esp8266 and AWS server
i have also worked on electric vehicle and implemented internet of things concept there too.
we just need your patience and my hardwork.
looking forward to work with you
regards
Prashant Mishra
Hi
We are team of experts having 6 plus years of experience in embedded systems, Iot, automation, pcb design and dovelopment and prototyping.
I have hands on experience in arduino, esp32, pic, arm, raspberry pi and other mcu.
Arm is low cost so i use arm for this project.
Thanks
Hi,
I have just make pcb layout for one of my customer like same as your requirement ( Using TSOP 1838 IR Sensor,relays and micro controller sensor). So If you have circuit diagram, I am ready to design for you also.
Waiting for your reply.
Hello,
I am an electronics and telecommunication engineer and I am quite experienced with hardware design and embedded systems design. I have just designed a card like this but it uses only IR TX-RX pair. I can design the same with HC-SR04, TSOP1838. (TSOP1838 and IR TX-RX pairs are same. TSOP is the reciever of that pair. If you want to add a different sensor you can use an IR sensor that can sense the heat or you can use proximity sensors such as capacitive proximity sensor).
For MCU I would recommened a PIC like 16f1824 or 16f88 which will cover all of the peripheral requirements and they do not occupy large area. We can also use PIC32MX530F128H, PIC24FJ128GA106, 16f877, etc.. or stm32f103, stm32f401,etc.. according to the dimensions and local market support but I am sure that you can find these MCU in every country. They are pretty common.
So just let me know and I will do my best to help you.
Best regards
I have very good programming experience and worked on such kind of projects for my own need . please ping me for more discussion. I can develop lcd for you with minimal cost and provide you the links of Components .
HI..I HAVE MORE THAN 7 YEARS EXPERINCED IN CIRCUIT DESIGN AND PROGRAMMING..IN MY PAST I HAVE DESIGN PROJECT WITH COMPANY..I HAVE ALREDY DESIGN SANITIZE CIRCUIT USING stm, TSOP ,UVC SENSOR AND TIMER UVC.
I CAN DESIGN IN LOWEST MANUFACTURING WITHOUT EMI-EMC.
YOU CIRCUIT COST WILL BE LESS THAN 60RS MAKING ON STM AND AVR.
Hi
I'm interested in your idea , i have an experience in many field that u need
i have made many projects :
* Automatic Grass Cutting Machine.
* Industrial Robot Arm with Pneumatic System.
* Automatic Filling Line.
* Prototype of 6 DOF Robot Arm with Controller .
* CNC Router 3-Axes.
* Motor Speed Control with PID controller.
* Delivering Boxes System with PLC .
* Security System .
Feel free to contact me if you have any question, have a wonderful day!
We are team of electronics and electrical engineers(4 people) , having experience more than 3 years, and worked more in arduino, nextion, stepper control, Renesas, snack vending machine, coffe vending machine, c programming, electronics hardware..
Currently we are doing the same project in our company, hence its easy to guide you
Hi, I am offering my services on short notice, I am an Electronics Engineer, i will provide you complete schematic of the circuit and PCB layout as shown in the attachments, along with coding on low cost Micro controller. You can check my portfolio. Pay me after getting complete SATISFACTION. Thanks
Dear Project Owner,
I am happy to do this type of complete electronics design and development jobs. I have 10+ years of experience in this, and worked with startup companies successfully. My Top Skill includes,
✅Requirement Specification ✅Component selection ✅Circuit Design ✅Schematic ✅Layout Design
✅8/16/32 bit(Arm) Microcontrollers ✅Sensor Interfacing
I can complete this job in your budget and time.