Engineer stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I can provide plan with measurements or will pay for the plans to build them to match design.

Hi there! My name is Livens and I am a licensed structural engineer living in Mexico. I have worked as a steel detailed, residential structural engineer and also in multistory buildings. I understand that you are looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I have some available measurements and design that can be provided or used to create the plans. I have some preferences for the design but am open to suggestions. My job would be to provide engineer-stamped plans for approval along with construction timing that meets Gulfport's wind requirements codes. Additionally, I have attached photos using 2x2x3/16 angle iron to demonstrate the same application. I believe that my skillset and experience make me the best fit for this project - please feel free to reach out if you have any questions or would like more information about my profile or services.

I am writing to express my keen interest in providing structural engineering services for your project. With my 8 years of experience in the structural engineering field and a strong academic background, I am confident that I possess the skills and qualifications necessary to successfully execute this project. I have thoroughly reviewed your project requirements and have a comprehensive understanding of the project's scope and objectives. I am committed to maintaining open and transparent communication with you throughout the project. I will provide regular updates on project progress and address any concerns promptly. I am Proficient at Drafting in Auto CAD, Civil 3D, Tekla Tedds, RAM/ Limcon Connections, Risa, Autodesk Robot, SP3D, Navisworks, Vray, BIM Modelling with Revit, STAAD pro, Tekla, 3D Max, Sketch up, Lumion Pro and Structural Analysis with SAP2000 and ETABS. Familiar with IS (456, 875, 1893, 800-1984, 800-2007, 801- LGSS etc.), ACI 318, ASCE, AISC 360-16, AISC 341, AWC NDS, IBC, BS-EN, AS/NZS, Canadian Codes and other. PE stamping for Texas, AZ, CA, FL, Utah, Idaho, Nevada, North Carolina, Massachusetts, Montana, Indiana, NM, NY, Maryland and Virginia states and P. Eng. stamping for Ontario, BC, NS & Alberta Thank you for considering my proposal. I look forward to the opportunity to discuss your project further and collaborate with you to achieve your desired outcomes. Sincerely, Ifam Siddeeq

Hello there! My name is BUI, and I am a Civil and Mechanical Engineer with extensive experience in structural steel and detailed residential structural designs. I am here to offer my services as an engineer to provide stamped plans for your steel trusses made from 2in and 1½in 14g steel tubing. I understand that you are looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing within a month's timeframe. My skillset includes strong knowledge of engineering principles and structural design, as well as proficiency in using CAD software for creating detailed plans. Additionally, I have experience in designing steel trusses, which will be necessary for this project to complete on schedule. I would love the opportunity to discuss how my skillset can best meet your needs for this project. Please don't hesitate to contact me if you have any questions or would like more information about my services. Thank you for considering me for this job!

Hello, we have reviewed your project. Together with my team, we can assist you in every way in terms of architecture. From architectural technical drawings to ultra-realistic 3D photos. We have provided remote support to many offices abroad and we continue to work with them, in this sense, we have important references especially from America and Germany. In addition, with our engineering capabilities, we can present you the cost analysis of your project and the amount of materials you will use in your project as a report. We create contemporary and traditional buildings with a flexible design approach. We have a command of all architectural and engineering programs and have a carefully established team. Do not forget that you will enjoy working with us and we will decide together with you at every moment of your project, please send us a message to get started. Good day.

Hi there,I'm biddin on your project "Engineer stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I can provide plan with measurements or will pay for the plans to build them to match design."Civil Engineering, AutoCAD, CAD/CAM, Structural Engineering and Building Architecture I am looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing I have read your project description and i'm a Professional Engineer therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Hello, my name is Niks and I am a professional Structural and Architectural Engineer and CAD/CAM Expert. I understand you are looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I have some available measurements and design that can be provided or used to create the plans. I have the necessary skills and experience to complete this project. My expertise includes strong knowledge of engineering principles and structural design as well as experience in designing steel trusses. Additionally, I am proficient in using CAD software such as Autocad, Sketchup and Solidworks for creating detailed plans. I am confident that my skillset will provide the best solution for your needs. Please feel free to reach out if you have any questions or would like me to further discuss this project further. Thank you for your consideration!

Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with steel trusses made from 2in and 1½in 14g steel tubing I’m a civil engineer holding a master's degree and have more than 6 years of experience in the field, and of course, I can help finish the required task in the required time. (I’ve done more than 50 projects finished successfully _ U can Check my reviews) Similar project as yours can be provided, just kindly inbox me for further details. Regards, Mohammed Zamzam

Hi there I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Engineer stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I can provide plan with measurements or will pay for the plans to build them to match design. plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

Hi there Danny S., Good evening , Hope you're having a great time. I have skimmed thorough the attachment on your project I'm bidding on your project "Engineer stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I can provide plan with measurements or will pay for the plans to build them to match design." I am expert in AutoCAD, Civil Engineering, CAD/CAM, Structural Engineering and Building Architecture. please leave a message on my chat so we can discuss the budget and deadline of the project. I have read your project description and i'm confident i can do this project for you perfectly. Thanks ..

Hello! My name is Adnan Gohar and I'm an experienced professional with a strong track record of success. As an engineer, I have the skills necessary to provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. My expertise in structural design, CAD software usage, building codes and regulations related to steel truss construction, providing engineer-stamped plans for approval and construction timelines that meet Gulfport's wind requirements make me an ideal candidate for this project. I understand that you're looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing within a month's timeframe. With my expertise in engineering principles and structural design, as well as experience in designing steel trusses, I am confident that I can deliver impressive results quickly while maintaining high quality standards. Additionally, I have the patience needed to work through any issues that may arise during construction so that the designs match exactly what you require. I look forward to hearing more about this project and discussing how my skillset could be used to best effect! Please don't hesitate to contact me if you have any questions or would like more information about

Hello, I have read your project "Engineer stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I can provide plan with measurements or will pay for the plans to build them to match design." . I've been working in 3D modeling, animation, and motion graphics for 6 years. I can execute this work entirely to your delight, I can promise you of that. I have a job completion percentage of 100% and am a top-rated freelancer with approximately Fiverr successful jobs on Upwork. To provide an exact pricing and timeline for this job, I need additional information about it. • I can do Character Modeling, • Digital Sculpting & High-Resolution ZBrush Sculpting. • High and Low Poly 3D Modeling and Texturing. • Basic Human Muscles and Anatomy Knowledge. • InOrganic Modeling & Hard Surface Modeling. • Character Design & Development. Physical Based Rendering (PBR). • Game Art, • Retopology, • Normal Maps, • Hair Cards We look forward to the opportunity to work with you and bring your vision to life. Sincerely, STUDIO GO

Hello, We reviewed your bid requirements and we are ready to work on your project, I will provide you with the best quality work in less time. We have good experience in the Architectural and Structural truss design field (of more than 8 years). We are experts in this field. We will give you the first draft in a few hours. The design provided will be creative and according to your requirements. We will deliver your project on time and there will not be a delay in my work. I assure you that you will like my work. Software tools: Autodesk Revit, AutoCAD, Archicad, SketchUP, Vectorworks, Lumion, Twinmotion, Photoshop designs and Alpine. Please award us the project so that we can discuss it more. Thanks & Regards,

Hey. I am a structural engineer and I can do your steel design based on your requirements, i have completed many of these types and I can provide sample. it will be professional. i can use ideal statical software, which will import all load pattern, cases and combination from SAP200 or Etabs Modesl and runs analysis for the different load applied. please let's talk about the scope. thanks

Hello. I am a licensed architectural/structural/civil engineer with 12 years of experience. I can design any part of a build you could possibly need, including: * Architectural/Structural Design & Drawing. * MEP(HVAC, electrical & plumping) Design & Drawing. * Architectural Rendering and animation I have high skills in many software such as AutoCAD, Autodesk Revit, Chief Architect, ArchiCAD, Sketch up, 3ds Max, Lumion etc. Please give me a chance, I will provide perfect results within your timeline. Thank you.

Hi, there? I read your project carefully. I am a building architect with experience of more than 5 years. I have many experience in Architectural drawings for permit & 3d modelling & 3d rendering with realistic render. I am expert in AutoCAD, 3ds MAX, Sketch up, Chief architect. I am sure I can provide a good result in time. Thank you in advance.

Hello, I am a mechanical engineer and I work as a draftsman. I can use Autocad, Autodesk Inventor, Solidworks and Tekla, I have an expert staff and I work on drawings.I have my own technical team. Send a message for your support and requests.

Dear Client, Your project for steel truss design aligns perfectly with our 6+ years of engineering expertise. We excel in creating stamped plans for steel trusses, meeting Gulfport, MS wind requirement codes. Our proficiency in engineering principles ensures structurally sound designs using 2in and 1½in 14g steel tubing. We're adept at CAD software, capable of producing detailed plans that adhere to building codes and regulations. Flexibility is our strength. We're open to using your provided measurements and designs or offering our own, tailoring the truss design to meet your preferences while ensuring structural integrity. Timeliness matters. Expect us to complete the stamped plans for your steel trusses within your one-month timeline without compromising on quality. Count on us to deliver precision, expertise, and cost-effectiveness. We're committed to meeting and exceeding your expectations. Warm regards, wizards of design

Hello. I am a mechanical expert and industrial design engineer with over 6 years of experience in mechanical and website design/development. I am a researcher and structural analysis expert, and I graduated with a bachelor's degree in mechanical and construction engineering in 2016. You can write research, theses, and research papers based on a solid understanding of core mechanical concepts such as kinematics, thermodynamics, materials science, and construction mechanics. Available online on CHAT 24x7 || 100% Job Satisfaction *NO UPFRONT PAYMENT || RELEASE FUNDS WHEN YOU ARE 100% SATISFIED* expertise: -3D CAD models, part and assembly drawings, FEA and CFD analysis (SolidWorks) - Static, dynamic, thermal analysis using finite element analysis (Solidworks, Ansys) -Architectural structural drawings and construction -Architectural and MEP Designs and provide drawings using CAD and Revit. -3D modeling and architectural structural design and drawing production using Autocad - Exterior & Interior Design - CAD/CAM - FEA and CFD -Physics and Mathematics. I have the ability to convey technical knowledge in an easy-to-understand and clear manner to understand all requirements and meet them in the best way

Hello, my name is Premi and I am a professional freelancer with over 10 years of experience in the field of 3D modelling and animation. I have worked on hundreds of projects with high quality results. Specifically, I have expertise in creating models that are accurate to real-life situations using 3D modelling and rendering programmes like Maya, Cinema 4D, 3ds Max and more. I understand that you are looking for an engineer who can provide stamped plans for steel trusses made from 2in and 1½in 14g steel tubing. I believe I am the perfect person for this project due to my skillset of strong knowledge of engineering principles and structural design as well as experience in designing steel trusses. Furthermore, I am proficient in using CAD software such as AutoCAD for creating detailed plans. I would be delighted to discuss further how I can help bring your project to fruition in an efficient manner should you choose me for the job. Please feel free to contact me if you have any further questions or would like me to provide more information about my services.

Can provide detail drawing for your request this include revision if you want so it will be accomplish smoothly