Programación en Arduino

We have a working device gathering distance from a laser sensor and sending data through MQTT and an API. What we have already available, you do not need to worry about: +Code written under the Arduino IDE. +The device has the following hardware bill of materials: -Custom PCB -ESP-12E/F -Sensor VL53L0X I2C -LED Green Color connected to GPIO 14 -Push Button connected to GPIO 0 *It is used to get Arduino into programming mode if pressed when device is starting *It is used as general purpose push button after Arduino has been initialized +The device has the following software bill of materials in the form of libraries: -WiFi Manager -Adafruit VL53L0X -FireBase ESP8266 -PubSub Client +A Gitlab repository where the latest version of code is hosted What do we need from you? your expertise to: +Implement in code to ability to have 3 states of the LED: -State One: If the device is not connected to WiFi, LED should be blinking every 1500 ms (adjustable in code) -State Two: If the device is connecting to WiFI, LED should be blinking every 500 ms (adjustable in code) -State Three: If the device is connected to WiFi, LED should be turned on and dimmed +Implement in code the reset of the WiFi settings by the push of a button: -When Push Button is pressed for more than 10 seconds (adjustable), the device should be reset calling [login to view URL](); What you will have access to: -Schematic -Source code -Online meeting with us to access to device remotely when you have the final code Future possible assignments if we have good collaboration and a successful first project: -Code Optimization -Troubleshoot a WiFi Manager issue -Troubleshoot Deep Sleep implementation