Rfid arduino project jobs

I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable c...

Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get my attention.) My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed i...

...individual to create an innovative IoT solution utilizing an Arduino board and camera module, along with UPC scanning software. This project involves developing a UPC scanner that can accurately read the UPC on a product. Upon scanning, the information of the scanned product such as date, time, UPC, product name and product retail should be transmitted and populated into a web application. Key Tasks: - Develop and integrate the UPC scanning software to be used with the camera attachment for the Arduino board. - Establish a Wi-Fi connection for the Arduino IoT UPC scanner to communicate with the web app. - Ensure accurate transmission and population of the scanned product information in the web application. Ideal Skills: - Proficient in Arduino progra...

I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficien...

Project Overview We are seeking a skilled Android developer to create a simple and efficient Car Maintenance Tracker app designed for auto repair shops. The app's primary function is to streamline customer and vehicle management by utilizing RFID technology. Core Features: RFID Integration: The app will utilize an RFID reader connected to the Android tablet to scan customer vehicle tags. Scanning a tag will display the vehicle's service history and stored information. Vehicle & Customer Data Management: For new customers, the app will allow users to create profiles by entering: Customer Name Contact Information (Phone, Address) Vehicle Details (Type, Engine Type, Oil Type, Filter Types, Battery Size, etc.) Additional Notes Existing customer data ca...

I am seeking a competent software developer to create a program that integrates a robot and RFID reading system, primarily for automating inventory management in a warehouse setting. The successful freelancer should strongly grasp robotics, RFID technology and software development. Their responsibility will be developing a software compatible with both Windows and Linux operating systems that smoothly facilitates communication between the robot and RFID reading system. Requirements: - Expertise in robotics and RFID technology - Proficient in coding for both Windows and Linux systems - Experience in developing software for inventory management - Understanding of warehouse processes and operations Goal: The objective is to make our inventory manage...

Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding should

I'm in need of an experienced developer who can help me write a code for interfacing a 16x2 LCD and RC522 RFID sensor with the Megawin MG82F6D17 microcontroller. The ideal freelancer should be proficient in: - Interfacing the LCD and RC522 sensor with the MG82F6D17 microcontroller - Implementing basic text display features on the LCD - Reading ID data from the RFID tags with the RC522 sensor A deep understanding of microcontrollers and RFID technology is a must for this project. The final code should reliably display the ID data from the RFID tags on the LCD.

I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM

I am in n...The scope of this project includes: - The procurement of a ready-made RS485 to TCP/IP Ethernet serial server converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the...

...experienced engineer who has a solid background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills need...

...there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK t...

I'm in need of an ESP32 BLE application that can be controlled remot...application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific ...

I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void ...

I'm looking for a s...engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your proposal with rele...

I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.

...comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students acros...

I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...

I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will b...

I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.

I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.

Here is a brief description of my project. My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when...

I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.

...complete my project report on a smart power monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardwa...

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will b...

I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button...

I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized ...

As a retail outlet owner, I have a SATO CL4NX Plus printer and I am eager to optimize its RFID settings specifically for: - Tag Encoding - Optimization of Read Range settings Ideal candidates to achieve these tasks should be proficient in configuring RFID settings specifically for UHF tags which our retail outlet predominately uses. In addition, experience in configuring RFID for retail settings will be a considerable advantage. KEY SKILLS: - Proficient in tag encoding and read range settings - Familiarity with SATO CL4NX Plus - Experience with UHF tag configurations - Knowledge of RFID usage in retail settings is ideal

I need a skilled programmer to help me with a project that involves setting up data communication between Arduino devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Exp...

I'm aiming at developing a robot that employs basic movement controls, thereby nece...aiming at developing a robot that employs basic movement controls, thereby necessitating a detailed circuit diagram backed by Arduino code. Essential aspects to consider encompass: - The robot's main purpose: Robotics - Level of complexity: Basic movement controls - Sensors involved: Pir sensor, Tilt sensor Ideally, I am searching for a freelancer who possesses have an extensive background in robotics, especially with movement controls, and a strong understanding of Arduino. Proficiency in working with Pir and Tilt sensors would be a crucial addition as well. Knowing your way around servo, stepper, and DC motor styles would be helpful, even though this particular project m...

Please Sign Up or Login to see details.

I'm looking for a skilled Arduino/PCB designer for my course project which has following features: - Switching ON/OFF power light: I'd like to control this using screentouch. - Temperature measurement: I'd like the device to measure the temperature in a room and display it as a numerical reading on a screen. All the above features should have battery power, just like a smartwatch. The ideal candidate should have experience in Arduino and PCB design, as well as a good understanding of power management and temperature sensing. If you're confident in your abilities and believe you can bring this project to life, please reach out.

I'm in need of an experienced Arduino programmer to make simple amendments to existing functions in my code. This project involves code which interacts with external devices - understanding of these interactions will be crucial. Requirements for this task: - Expertise in Arduino programming and language - Experience with code that interfaces with external devices - Strong attention to detail as subtle changes are required - Ability to ensure system functionality post modification I look forward to your comprehensive responses. Ability to deliver promptly and accurately will be considered for ongoing work.

I ne...crucial for this project. - BOM File has to be provided - CPL & Gerber files has to be provided - NEEDS to be cost-effective for mass production - Any mining algorithm should/could be programmable - Considerable high hashrate is expected - Raspberry Pi 3/4/5, ESP32xxx, Arduino or any other microcontroller can be used The main focus of this project is: - Low cost hardware ( PCB ) - Electrical Efficiency - Mining capabilities - Scalability - Considerable hashing rates expected This project has a budget of 500-750 USD for a running & tested prototype and has to be done ASAP. You have totally freedom of the components you want to use, but remember that the cost of the PCB itself should not be astronomical. The freelancer has to signed an IP Agree...

...create a GPS RFID system specifically for tracking a golf ball. The system should be very accurate, able to pinpoint the location of the ball within millimeters. This project is not for general location tracking or asset management, it's tailored for a very specific case. Key requirements: 1. **GPS and RFID Integration**: You'll need to create a system that can effectively integrate both GPS and RFID technologies for the purpose of tracking the golf ball. 2. **High Accuracy**: The system must be able to provide the location of the golf ball within millimeters. This is crucial for the success of the project. 3. **Radio Communication**: The tracking system should also be able to effectively communicate the location data using radio. Ideal ...

Project descripƟon (given): Describe design of a simple “weather staƟon”, which measures temperature and humidity and displays the values on an LCD screen. The system is based on one or more Arduino boards and addiƟonal components. Design the structure of the system, select components and sketch the structure of the system soŌware. (Based on Arduino Project Handbook by Mark Geddes, 2016) Note: Not all details are specified in the descripƟon. For instance, we don’t know where exactly the system will work, how it will be powered (baƩery or grid), and how oŌen measurements will be taken. Resolving these issues is leŌ to you as the designer of the system. However, remember that each design decision requires a jusƟficaƟon. 3. General idea of the sol...

...an almost completed power electronics system for bidirectional power exchange of up to 8 kVA across all four quadrants. The system utilizes the IM828-XCC platform, with control achieved via galvanic isolation through the Arduino DUE. Your main tasks involve adding the ADuM1401 Digital Isolator for Arduino connection, connecting the motor and generator functionalities, integrating the iMOTION2go chipset, and creating the PCB design using KiCad. Project Tasks: ADuM1401 Digital Isolator Integration: Add the ADuM1401 Digital Isolator to ensure galvanic isolation for the Arduino DUE connection. Implement necessary connections and ensure compatibility with existing components. Motor and Generator Connection: Ensure seamless functionality of both motor and generat...

I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino framework will be highly beneficial.

I'm seeking an experienced flutter developer to expand the key inventory features of our existing product. The key enhancements we're focusing on are: 1. Barcode Scanning: ...decisions, optimizing sales and ensuring product availability. Your quotation should include estimated time of completion, with the understanding that all bugs must be fixed. The detailed Product Requirements Document (PRD) is attached for further insights into our expectations. Ideal skills for this project include experience in barcode scanning technologies, competent knowledge of inventory management systems, and proficiency in bug fixing. Please share your previous experience in these areas when you place your bid.

I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.

I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for automated appliances. ...

I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.

So I posted a blog in 3 languages: I'm going to make the blog to show on latest section just like I always did whenever a new blog is live. The issues is, I cannot find the blog. Usually I'll just need to type the blog post name (see attached) and find it but it suddenly stop working. The page in screenshot: Whatever way you are trying

For my recent short book about utilizing Arduino, I need proficient help with enhancing the aesthetics and formatting of the text. The ultimate goal is to turn my raw material into a print-ready layout while ensuring it matches my preference for a modern and clean style. Final format needs to be one that I can easily edit. Style reference: Makezine (make magazine) books or Hackspace magazine. Key tasks for this project: • Develop diverse page layouts to maintain reader engagement. • Incorporate placeholders for pictures to enrich the content visually. • Include placeholders for elements like flow diagrams and illustrations to support the text. Ideal candidate: An ideal candidate for this position will have considerable experience in book layout design,...

...up of a central unit, three presence sensors, an RFID tag reader and a siren. The control unit is located inside the residence and has a panel with LEDs. 1 LED lights up steady to indicate system activated. When the control unit is activated and a person passes in front of the sensor in a room, the siren sounds and the violated sector(s) are indicated on the control panel. 3 sector LEDs to indicate a breached room after activation. When violated, it flashes at a frequency of 10 Hz until the alarm is activated until the siren is deactivated. It lights up steadily to indicate the sector violated until the control unit is reset or rearmed. 1 reset button on the control panel. As a result, the violated sector indicator LEDs are turned off. The RFID reader is at the entrance to...

...commercial clients. Key Features: Check out the attached file for complete requirements: High Level Features • Custom Website & Booking Module • Work Order Management • Estimates and Invoices • Bin tracking with map view • Scheduling Routing & Dispatching • Real Time Billing & Invoicing • Reporting & Dashboards • Mobile App (Driver, Dispatcher, Contractor) • Inventory management (Bin #s, Bin Chip RFID) • Driver and Truck Management • Comprehensive Configuration o Custom Fees: Custom fees per city, per customer, per material, per service, per bin • AI - Forecasting of transaction, inventory • API Details: Custom Website & Booking Module: Each vendor will have the ability to configur...

Description: I am seeking a skilled freelancer with experience in electronics, Motor Control through Pulse/Step & Direction, Arduino, and servomotors and their drivers to assist me in implementing the basic control for reliable operation. The primary focus will be on the electronics aspect of the project. The motor in question is a "T6 Series 750W AC Servo Motor" (see link: ) which is intended to be controlled using an Arduino Portenta H7. What I Require: - Development of an appropriate circuit diagram compatible with the motor driver and Arduino. - Selection of the required components. - Configuration settings including pulse widths, pulse formats, etc.

I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. Receiver is SBUS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.

I'm in need of an experienced Arduino developer to create a custom software for my industrial machine. The software should mainly focus on data logging and controlling the machine's sequences. Key Requirements: - The software must log the machine's operation data onto an SD card. This data should be easily accessible and able to be downloaded for further analysis. - The Arduino software needs to control the sequential operations of this industrial machine. This involves managing the input and output signals, and ensuring a timely and accurate execution of the machine's functions. Ideal Skills and Experience: - Proficient in developing Arduino software. Knowledge of both sensor data collection and actuator control is a plus. - Prior experience in p...