Raspberry pi humidity sensor jobs
...PCB, software, and implement an app for a Bluetooth locator, like a simple key finder. There are many products like this already on the market at very low prices. PCB must be small, alarm very loud and power consumption low. Bluetooth should automatically connect to the phone. PCB should power on when movement is detected and remain on for a period of time, set within the app. A tilt/vibration sensor detects when the PCB moves and turns on the power. Key features of the Bluetooth device must include: - Alarm sound feature - press button on phone to sound a loud alarm on PCB - Flashing light feature - light flashes when alarm sounds - Show on-map location - Rechargeable battery capability - Battery charge status either within app or on PCB i.e. flash red LED on PCB when charge...
I'm looking for a skilled Arduino developer to help me create a fault detection system for AC supply. The system should be able to identify possible faults including short circuit, open circuit, phase loss and other related issues. Key components: - I've decided to use an ESP32 board instead of the conventional Arduino boards for this project. - The current sensor I'd like to implement includes ZMPT101B and ACS712. - The voltage sensor I'd prefer to use are the ZMPT101B and ACS712. Your tasks would include: - Writing the code required for the ESP32 board to interface with the current and voltage sensors. - Creating the fault detection algorithms in the code. Ideal skills and experience: - Proficiency with Arduino and ESP32 development. - Experience in ...
I am looking for someone to build a wifi controller for a dehumidifier which has a wired remote control with an LCD display and which will allow to remotely turn on/off the device as well as up or down the desired humidity level. There are 4 separate buttons to physically press on the remote to do this: 1. turn on 2. enter settings 3. press up (increase humidity) 4. press down (reduce humidity). A wifi module would therefore need to be added to the remote control which should enable me to control the dehumidifier using an app on my Iphone. I would send you the wired remote by courrier so you can add the wifi module and you ship it back to me. link to the item :
I want 3d Simulation or rendering of smart inventory control system, in which lift mechanism connected with vibration sensors and conveyor is connected with ultrasonic sensor along with Arduino uno, esp wifi module, screen and motor driver all in software.
I am in search of an expert in the integration of RPLIDAR with Raspberry Pi for the purpose of navigation and obstacle avoidance in a medium-sized environment like an office building. More specifically, the freelancer is required to: - Program the Raspberry Pi to operate the RPLIDAR. - Create an algorithm or a method that can take in real-time data from the RPLIDAR and efficiently convert it into a visual, real-time map. - Use the mapped data for navigation and obstacle avoidance by the Raspberry Pi. Ideal Skills and Experience: - Proficiency in working with Raspberry Pi. - Experience in programming RPLIDAR. - Good working knowledge of obstacle avoidance algorithms. - Proven experience in navigation systems, particularly in indoo...
pI am looking for an experienced software developer to create a PVC software for me. The core features required are: - PDF data extraction and printing: The software should have the capability to extract both text and images from PDF files and facilitate printing of the same. Proficiency in PDF manipulation tools is highly desired. - Image extraction and printing: in addition to text, the software should efficiently extract images for printing. - Localization: The software should fully support localization for all local Indian languages, with specific advantages in Hindi, Tamil, and Bengali. Understanding of the cultural context and linguistic nuances associated with these languages is a bonus. Ideal candidates will have a strong background in software development and previous...
I am aiming to have a pi zero programmed to read voltage levels from a 12-volt battery bank. The trigger to start the generator should be a low voltage condition. The purpose of this project is to remotely start the generator, with a focus on maintaining efficiency and practicality through a direct physical connection. Key objectives include: - Programming the pi zero to accurately gauge low voltage conditions - Enabling the generator to automatically power up in case of a drop in voltage. - Continuing the generator input even after the voltage returns to normal, with this feature designed to maintain a steady and reliable power supply. Ideal Freelancer Skills: - In-depth understanding of Raspberry Pi Zero programming for hardware operations - Knowledge in ...
...project that requires interfacing a Raspberry Pi with a Panasonic Servo Driver. I need a professional to perform the following tasks: - Setting up Modbus communication between Raspberry Pi and Panasonic Servo Driver (Model Number: MDDLT55SF) - Setting up CC-Link IE TSN communication between Raspberry Pi and Mitsubishi Driver (Model:MR-J5W3-222G) - Writing code for controlling the servo driver from the Raspberry Pi - Testing and debugging the system - Providing support for any issues that may arise during the project Previous experience with Raspberry Pi and Panasonic Servo Drivers is a must. Additionally, the ideal candidate will have a strong understanding of programming in Python, as well as a background in robot...
I need to wrap a label (fictitious) on a soup can - the label is already created with aspect ratio of Pi - once the label is applied to the can, the can needs to rotate 360 degrees so we can see all parts of the label. I want a photo realistic render at 4K with an alpha channel so I can layer it onto a background if I choose to. I will need a few 6K still renders also. I have attached a few of the photoshop mock-ups I have created.
I'm working on a project that involves an ESP32 device. This application will serve as the interface for the user-ESP32 communication. Key features I'm looking for: - **Real-time data visualization**: The app should display sensor data and other information from the ESP32 in real time. This is crucial for monitoring and making informed decisions. - **Graphical User Interface**: A clean, user-friendly interface is necessary for easy operation. Think about intuitive design and clear displays. - **Bluetooth Connectivity**: The app must be able to connect seamlessly to the ESP32 via Bluetooth. Reliable connectivity is a must. Interactions: - **Button presses**: The app will have buttons for the user to send commands to the ESP32. These should be responsive and intuitive. ...
I am seeking an experienced engineer to design and implement a two-axis machine control system that is capable of: - Effectively controlling and managing the movements of the system along two axes with a LIMITED RANGE. Your expertise in designing systems with the ne...Comprehensive knowledge in machine systems control and design. - A thorough understanding of motion control strategies. - A background in data analysis and logs processing. The machine is a Bandsaw to cut small logs into planks. The 2-off, NEMA 23 stepper motor movements are sequential, ie, first one moves then the second stepper moves. The controller is a Raspberry Pi 4, the prefered language is Python. Input to the controller via R Pi 7inch Touchscreen. File is to big to attach I lo...
I am seeking an experienced engineer to design and implement a two-axis machine control system that is capable of: - Effectively controlling and managing the movements of the system along two axes with a LIMITED RANGE. Your expertise in designing systems with the necessary navig...Comprehensive knowledge in machine systems control and design. - A thorough understanding of motion control strategies. - A background in data analysis and logs processing. The machine is a Bandsaw to cut small logs into planks. The 2-off, NEMA 23 stepper motor movements are sequential, ie, first one moves then the second stepper moves. The controller is a Raspberry Pi 4, the prefered language is Python. Input to the controller via R Pi 7inch Touchscreen. File is to big to attach I lo...
...Natural Language Processing: The platform should possess advanced natural language processing capabilities. - Voice Chat: The ability for the platform to support voice-based communication. - Image and Multimedia: The platform should support a range of multimedia options, from text to photo uploads. Platform Support: The mobile application should support the interface and experience similar to that of Pi from Inflection AI or ChatGPT from OpenAI. Design: The design should be sleek and modern, catering to a professional and tech-savvy audience. Ideal Skills and Experience: - Proficiency in natural language processing and machine learning - Strong UI/UX design background - Extensive experience in mobile application development - Familiarity with platforms such as Inflection Ai or...
I am currently developing the field oriented control system for a permanent magnet synchronous motor. My goal is to improve the speed response, specifically the acceleration time, deceleration time, and steady state error. The project involves the tuning of PI controllers within the system, meant to enhance its overall performance. For this task, a proficient knowledge of control systems, system modeling, and tuning methods is required. Previous experience with PI tuning is beneficial. Currently, MATLAB/Simulink is being used for modeling and system simulation, hence proficiency in it is crucial. Ideally, the candidate will have extensive experience using MATLAB for complex motor control simulations. However, I haven't defined the specific tuning methods to be used w...
I am looking for an expert with solid experience in Fiel...looking for an expert with solid experience in Field Oriented Control (FOC) of Permanent Magnet Synchronous Motors (PMSM) who can help tune my PI controllers for more precise speed control. Here are the specifics: - I have an established model using MATLAB/Simulink, and the PI controllers are already implemented. - The key outcome I want is to enhance the accuracy of the speed response. The ideal candidate will have: - Extensive knowledge and experience with PMSM and FOC. - Proven background in tuning PI controllers. - Strong proficiency in MATLAB/Simulink. Your task will involve analyzing the existing model, suggesting enhancements for the PI controllers, and implementing these changes to achieve...
I need a Java or python3 programmer to create a sensor-data generator for the website www.voeazul.com.br. The objective is to send a POST request to the site with valid sensor-data in order to obtain a particular cookie (_abck) for data analysis purposes. The sensor data to be simulated includes mouse movements, keyboard interactions, and browser interactions. Key Requirements: - Create a sensor-data generator in Java or python3 - The generator should simulate mouse movements, keyboard interactions, and browser interactions - The sensor-data should be valid enough to trigger the generation of the _abck cookie upon sending a POST request to Ideal Skills and Experience: - Proficiency in Java/python3 programming - Experience in web scraping and automati...
...rounded bar with % value received from 3 x ads1115 i2c connected Key Responsibilities: - Program the ESP32 to recognize and interpret the data from the I2C ADS1115 sensor module - Integrate a responsive touchscreen control and an LCD display on the Waveshare ESP32 s3 Touch LCD 4.3 - Ensure the system is user-friendly and able to display the sensor readings accurately - Implement the system in a way that is easy for someone with an intermediate level of programming experience to understand and modify Ideal Candidate: - Proficient in Arduino and ESP32 programming - Prior experience working with touchscreen displays and sensor modules - Good understanding of data interpretation and display - Excellent communication skills to help guide the client through the system ...
I need a technical expert skilled in Raspberry Pi integrations to create a display of GPS coordinates, IMU data, and set the frequency for a TBS satellite receiver on a 7inch LCD screen. The components for this project are: - GPS module - IMU module - TBS satellite receiver The LCD display should show GPS coordinates and IMU data in real-time. It also needs to set the frequency for the TBS satellite receiver. The Raspberry Pi setup will be powered by a battery, so considering power consumption in the build is important. Ideal skills for this job would include: - Experience with Raspberry Pi integrations - Familiarity with GPS modules and IMU modules - Knowledge of frequencies for TBS satellite receivers - Proficient in power management for co...
...strong grasp of mass transfer operations, specifically in the context of humidity measurements and cooling towers. The reports I need should cover both these subjects and offer an overview with basic principles. Key Responsibilities: - Crafting comprehensive reports on humidity measurements and cooling towers - Ensuring that the content is structured, informative, and provides an overview of the topics - Incorporating fundamental principles of mass transfer operations in the reports Ideal Skills & Experience: - Proven experience in mass transfer operations, distillation, absorption, and extraction - Strong research skills and the ability to present complex concepts in a clear and concise manner - Previous work on humidity measurements and cooling towers will b...
We are seeking an experienced skilled Raspberry Pi developer for an exciting machine workflow using Raspberry Pi and servo motors. The project involves developing software for control, and integrating the Modbus TCP/IP protocol. The successful candidate will demonstrate expertise in Python programming, servo control, and Modbus communication. Phase 1: Set up the Raspberry Pi 4b to control servo motors and configuring communication with the Panasonic Minas Driver and Panasonic Servo Motor. Install Modbus server software and develop custom Python scripts for Modbus communication and servo motor control. Phase 2: Control Iron Core Linear motors and configuring communication with the Mitsubishi Driver . This can turn into a long term project for ...
...should accommodate a dual lane setup. - Display: 7-Segment LED HT16K33 Backpack above each lane to show timing results. - Winner Identification Feature: An 8x8 matrix screen for indicating 1st and 2nd place finishes. Ideal Skills and Qualifications: - Working knowledge of Arduino programming language. - In-depth understanding of microcontroller-based systems. - Hands-on experience with infrared sensor technology. - Ability to integrate multiple components into one cohesive, functioning system. - Practical knowledge of LED Display systems, specifically the 7-Segment LED HT16K33 Backpack. - Comfortable with crafting solutions for race-based project requirements. In bidding, please showcase your experience with Arduino Uno projects, and if possible, share examples of similar timin...
...various elements of the security system for automation. • Incorporation of alarm systems: The controller should easily synchronize with alarm systems, enabling automated responses in case of triggered alerts. • Seamless integration with access control systems: I wish to automate the access system in my shop, hence the PCB controller must be compatible with modern digital access mechanisms. • Door sensor compatibility: The controller should also connect flawlessly with door sensors, to monitor and log the opening and closing activities. The ideal freelancer for this task should have expertise in electronics, PCB design, and have a track record of developing similar high-tech automation systems. Knowledge and experience in security systems integration will be an ...
...intermediate-level programmer with experience in Embedded C and 8051 Microcontroller. The project involves designing a system that takes input from 3 sensors and controls an actuator (motor). Key Requirements: - Design a system on 8051 Microcontroller - Program the system in Embedded C - 3 sensor inputs and motor output - Intermediate experience level - Assist in sourcing necessary components I have a strong preference for someone who has worked with 8051 Microcontroller and has experience with designing systems that integrates sensor inputs and actuator outputs. Your role will involve both programming and assisting in recommending and sourcing the necessary sensors and actuator for this project. If you're experienced in these fields and can commit to assisting w...
...primarily used for scientific research. Key Requirements: - Transparent Display: The display needs to be integrated in front of a small lens, which will then be in front of an image sensor. The display will serve as the light source, allowing light to reflect off the sample. - Raspberry Pi Integration: The device should be able to stream footage through a Raspberry Pi. Ideal Skills and Experience: - Prior experience in designing and building similar handheld devices or microscopes. - Knowledge of integrating transparent displays and image sensors. - Proficiency in programming and working with Raspberry Pi would be a plus. - Understanding of scientific research needs and standards. The ideal candidate for this project sho...
Build an ISO for a raspberry pi (with cellular notecard) to scan for unique cell phones in a specific range and log the unique phone ID and timestamps/ping (distance) from the raspberry pi and store in mysql database using cellular adapter.
...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in P...
I'm looking for a professional to integrate home automation features in my living space. I'm interested in automating lighting, heating/cooling and integrating specific features for each area. Key Requirements: - Lighting Automation: I need the system to include dimming capabilities, color changing lights, and motion sensor lights. It should be able to adapt to different lighting needs and situations. - Heating/Cooling Automation: I have a smart thermostat and I would like it to be integrated into the system. The system should allow for optimal temperature control and adapt to my preferences. Ideal Skills: - Home Automation: Experience with setting up and integrating smart home features is a must. - Lighting Systems: Proficiency in configuring lighting systems with va...
...Selection: I need assistance in selecting the appropriate HVAC equipment, like mini-split A/C units, a wood burning stove, and a boiler for the in-floor concrete heating. This should be based on the results of the Manual J load calculation. - Manual D Duct Design: Not required because of Mini split system and lack of a furnace. - Manual T Design: I need a design that ensures the thermal comfort and humidity control in the home. Ideal candidates for this project should have: - Proven experience with Manual J, S, D and T - Experience designing HVAC systems for larger residential homes - Excellent attention to detail - Good communication skills - The ability to work remotely, providing clear and accurate deliverables. If you're confident in your ability to deliver a top-notc...
We have diagrams for the cars. We want someone who can create a database of where we can find the analog fuel sensor wire under the dashboard. Project is for 1000 cars and can be long term.
I'm looking to create a binding within Openhab for an Elmo alarm system. The binding needs to enable the following functionalities: - Remote arming and disarming of the alarm system. - Monitoring the status of individual sensors and zones. - Sending sensor states to OpenHAB items. I do have a similar project that was written in Python for Home Assistant which I can provide as reference and guidance. Ideal Skills: - Strong experience with Openhab binding. - Proficiency in Python programming. - Familiarity with the Elmo alarm system will be a plus.
To integrate my Elmo alarm system with openHAB through bi-directional binding, I need a developer with openHAB and Elmo experience. The binding should be developed for E-connect, Elmo's cloud integration model. The features I'm after are: - Arm/Disarm functionality - Real-time status updates - Alarm event notifications - Sensing and sending sensor status to openHAB items. Anytime there's an event, status change, or a sensor goes on/off, I need the binding to provide immediate updates. Your skills in openHAB binding, Java, and IoT integrations will be essential for this project. The same project is just written in python for homeassistant
I'm in need of a skilled cross-platform app developer to create an application for my car cover company. This smart home app will control WIFI lights and fans specifically. Key functionalities include: - Ability to control lights - Control fans - Monitor humidity This application is all about automation, so it requires a development team with a strong background in cross-platform app development, specifically working on smart home apps. Awareness of IoT would be beneficial, given the smart home focus. Considering user experience, the app should be intuitive, easy to use, and visually appealing, therefore, UX/UI design skills are critical. This project is an interesting opportunity to work on an application that moves beyond standard functionalities and delves into home au...
Design of Digital filter algorithm/ code in C for ARM processor for processing real time raw sensor to removal of noise & unwanted signal Algorithm / code for Digital Filter low bandwidth Real time Sensor Signals 1. Analogue Raw data acquisition in real time at 1000 samples per second in 24 bit precision 2. Raw data signal bandwidth /frequencies restricted to less then 1000 hz by hardware RC anti aliasing filter to avoid aliasing 3. Following Digital in sequence to be applied to raw signal . a. low pass filter 0-170 hzs ( to remove high frequency random / white noise b. High pass filter 1 hz to 400 hz (to remove low frequency dur DC signal coupling ) c. Very steep(narrow band) notch filter at 50 hz / 60 hz to remove power line interference a & b can be com...
...see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....
I am planning to use 1.69" LCD Display Module (240x280) with raspberry pi 5 to draw animated eye … I am looking for a developer to help me in 1- setting up the screen to work with raspberry pi 5 like this :RPI_for_1.69_lcd_module 2- setting python on my raspberry 3 - write a python code to draw animate eye like this I will give remote access to my raspberry pi 5 and the developer should install everything live to my items.
...fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports tec...
I'm looking for a talented Kivy designer to help me bring my application to life on a Raspberry Pi. Key requirements: - Designing user interfaces: My ideas are solid but I need someone who can make them a reality on screen. - Creating interactive buttons and widgets: The application needs to be intuitive and user-friendly. - Integrating code with the UI: The successful applicant will be able to help me to integrate the back-end code with the user interface. Ideal skills and experience: - Proficient in Kivy: As a Kivy designer, you should have experience in developing applications on this platform. - User interface design: You should have a strong portfolio of previous user interface designs that you can draw upon. - Attention to detail: A keen eye for detail is essent...
...tech-savvy professional who can create an application that allows for seamless remote control of ventilation systems. The ability to work across multiple platforms is essential as the application needs to be compatible with iOS and Android devices, as well as Windows computers. Primary Features: - Timer scheduling - Remote control of ventilation systems - Monitoring parameters including temperature, humidity, twilight, and weather - Real-time notifications and alerts - Scheduling system actions - Support for multiple users simultaneously Given the sensitive nature of the data and operations, the application must be secure. Your work will involve implementing advanced encryption to safeguard our communications and data. The ideal candidate for this project should be proficient ...
I am in need of an experienced individual to assist in the development of a Wireless Sensor Network (WSN) simulation . The main focuses of this project include performance evaluation, energy consumption analysis, and routing protocol comparison. Key Requirements: - Previous experience in WSN network simulation - Able to develop a proprietary MAC protocol - Proficiency in relevant programming languages and software such as NS2/NS3, MATLAB, or OMNeT++ - Strong understanding of WSN system design Your primary role will be to help me create a comprehensive simulation that accurately represents a WSN network, as well as develop and test a proprietary Medium Access Control (MAC) protocol. This will require a keen eye for detail, a solid understanding of network architecture, and a strong...
...see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....
I require a bridge software that seamlessly integrates native device drivers from Android (Java/Kotlin) and iOS (Objective-C/Swift) into my existing ReactNative application. Key Requirements: - I need the software to enable efficient and secure access to device sensor data. - The bridge should be able to handle and manage background services effectively. Skills/Experience: - Strong background in software development, specifically on Android and iOS platforms. - Proficiency in Java/Kotlin, Objective-C/Swift and ReactNative. - Prior experience in building bridge software is highly desirable. - Ability to deliver quality results under a tight timeframe is essential. Drivers: IoT SDK for BeaconSET+: Password: minewtech Documents:
...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in P...
it should have a file with , , , etc.
...Simultaneous video recording is another critical facet of this application. The developer must integrate a robust video capturing feature that works in tandem with the LiDAR scanning process. This feature is not merely about recording visuals but is intricately tied to the app's core functionality, providing a live feed of the scanning process and capturing the real-world environment as the LiDAR sensor gathers data. This integration must be seamless, with the video and scanning data synchronized to offer a comprehensive view of the scanned area. Audio transcription adds another layer of complexity and utility to the app. As the app scans and records, it should also listen, capturing every word spoken during the process and transcribing it in real-time. This feature is cruc...
...need to replace the Medispo logo by our logo which you can find it in the second file (Lujain marketing) , you may revise some colors to keep matching with our identity logo. - we need to change Models number on the items artworks to be as below : CAT# AS BELOW: A) POLYISOPEREN LATEX FREE SURGICAL GLOVES 1-Dr. LUJAIN POLYISOPERENE SURGICAL STERILE POWDER FREE GLOVES ( LSG-PI-5.5 ——————9.0) 2-Dr. LUJAIN POLYISOPERENE UNDERGLOVING SURGICAL STERILE POWDER FREE GLOVES ( LSG-UG-5.5 ——————9.0) 3-Dr. LUJAIN POLYISOPERENE DOUBLE GLOVING SURGICAL STERILE POWDER FREE GLOVES ( LSG-SD-55——————85) 4-Dr. LUJAIN POLYISOPERENE SENSETIVE SURGICAL STERILE POWDER FREE GLOVES ( LSG-SG-5....
...fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports tec...
I'm looking for a UI designer to create a modern and sleek user interface for an ESP32/Arduino and a sensor based project. The design should feature gauges and other components in various colours completing a modern and clean aesthetic design. The UI should include the following components: - Sensor Readings: The main screen should present readings from various sensors in a clear and easy-to-understand format. - Real-time Graphs: The design should incorporate real-time graphs that display data trends in an engaging and user-friendly manner. - Control Buttons: The UI must also include control buttons for user interaction. Ideal candidates should have: - Proven experience in UI design for IoT projects, particularly for ESP32/Arduino. - Proficiency in creating sleek,...
