Need technical writer from electronics background

Expertise in MATLAB, electronics engg and embedded systems with 8 years of academic, industrial and freelancing experience in this field I have completed various projects related to this field as you can view my profile for completed projects. I can provide you your complete task in a decided time frame with quality work. I can also provide you my sample work if required. We can discuss further details in the message box Best,

Hi There, Assalam o Alaikum! I am a senior expert in electronics, circuit design (MULTISIM, LtSpice, Logisim, PsPice and Proteus), simulation, microcontroller programming (8051, PIC, AVR, ATmega, ARM), PLC Programming LAdder Logic, arduino coding, fpga (verilog, vhdl), ESP Series. Just share your details for further discussion. As i need just some days for working, can't do urgent works. Thanks

I am an Electro-Mechanical Engineer , I love all engineering tasks and I can offer freelance work focused on the development of new products. I have a good experience ( 3 years +) using Arduino , Matlab Hoping to work for great people like you and making you happy through my work is my priority . Best Regard

I have over 5 years of expertise with Matlab, Simulink and reports based on the same. I also have knowledge in Image processing, Communications, Electrical Engineering and other related subjects. I can also do data analysis and statistics in Matlab. Please share the details of the project to discuss further.

Hi there, I am Ahmed an electrical engineer, i have seen your announce and i want to participate in a such work I have good background in digital systems, Arduino and programming, Ocatve (free alternative to Matlab), 555 timer... and more I am ready for an interview, contact me over chat to discuss more details.

I have BS in Electronics Engineering with experience in the topics required by you. I have written a number of technical reports and will complete your work as required. Contact me for further details.

Greetings ! I am an Electrical Engineer with special expertise in Arduino Programming, MATLAB Programming, Simulink Simulations ,Proteus Simulations and Thesis / Dissertations in LATEX. I have read your project details deeply. You are looking for an Electrical / Electronics Experts for Technical Report writiing. I am confident that I will be able to complete this task and much interested in your project I will be available any time when you required. I have already written Diseertations in LATEX. Samples can be provided in chat box. Hope you will consider my proposal. -------------------I CAN START RIGHT NOW------------------ Thanks

1- General Skills  Experienced Electronics Engineer/Technician.  Experienced Microcontrollers Firmware Developer.  Experienced Schematic Capture/PCB Designer.  Experienced Electronic Prototypes Developer/Researcher.  10+ years Microcontrollers Firmware Developer, 20+ years Electronics Engineering Developer/Repairer/Troubleshooter 2- Electronic Skills  Excelent knowledge of Power Electronics, Opto-Electronics, Industrial Electronics, Digital Electronics, Analogue Electronics. Good Knowledge of design Schematics with Electroinic CADs and Simulators: Orcad, Tango PCB, Pspice for Windows, Texas Instruments Multisim Electronics Workbench 11, Protheus SCH PCB Sim, KiCAD, DipTrace Electronic CAD, Eagle Electronic CAD 3- Microprocessors and Microcontrollers Programming Skills  Experienced Microcontrollers Programming Microchip PIC séries C & Assembly Languages, Arduino with Atmel Microcontroller AVR 328; Texas Instruments MSP430 launchpad séries C & Assembly Languages.  Experienced programming in Assembly Language for CPUs: Zilog Z80, Intel 8085, Intel x86 and Motorola 6809 microprocessors.  Good Knowledge of Microcontrollers IDE Packages Microchip MPLAB IDE, MikroC IDE, Arduino IDE, Energia for MSP430 microcontroller series Arduino look alike IDE, Texas Instruments Code Composer IDE. PLCs Zen and Zelio

Hello, may I help you. I am an electronic engineer and have written many technical papers and reports. for a university. I am new to the platform and we can come up with a very good price. it is only to give me the confidence to make a good team write me.

As Im an electrical engineer with sound knowledge of python, data analysis, autocad, pvsyst, sketchup, excel, ms word, HOMER. I can complete your project on time and within your budget. I have worked on similar projects to what you are looking for, and I am confident I can exceed your expectations. I will give you unlimited revisions and support until you are satisfied. So, if you give me a chance to serve, I will give you the best quality work on time. Thanks

I have done Electronic and Communication and was a Non Degree Program student at IIT Gandhinagar with 90%. I have lot of projects, filed research papers, won startup contests using Micro-controller, IOT, Nanotechnology and MATLAB based projects, I am 1 ranker at my university and having experience of research, projects and study. I am also GATE 2021 qualifier with 96 percentile. I have filed a US patent recently and having two international publications. I have vey good knowledge of writing technical reports and papers

Greetings I wrote many articles on programming using typora software and the rate was 18$ per 1000 words. Hoping to hear from you. Regards Ammar

Hello, Hello, Im an Embedded Software Engineer at Lear Corporation with an excellent skills in English languge I have a deep knowledge in Embedded systems i already developped drivers for communications protocols such as UART, I2C, SPI for STM32F4xx microcontrollers, i also developped a custom bootloader for the STM32F4xx using keil IDE and STM32 CUBE Mx, and others using arduino, PIC and using many softwares such as arduino IDE, isis Proteus, LabVIEW, CCS I have also many work experiences for me its a easy work and i think im one of the best choices for your project Kind regards Assim

Hello, My qualification and experience just meet your requirement, It would be m pleasure to provide my services to you as Technical writers. Furthermore, Below is the my sample work for the topic of "Programmable Logic Controller" PLC. INTRODUCTION 1. A Programmable Logic Controller, or PLC, is a ruggedized computer used for industrial automation. These controllers can automate a specific process, machine function, or even an entire production line. How does a PLC work? 2. The PLC gets data from associated sensors or input gadgets, forms the information, and triggers yields based on pre-programmed parameters. 3. There are few highlights that separated plc from mechanical PCs, micro-controller and other mechanical control solutions. 4. I/O – The PLC’s computer hardware stores and processes program data, however input and output modules connect the PLC to the remainder of the machine; these I/O modules are what give data to the computer hardware and trigger specific results. I/O may be either analog or digital; input devices would possibly embody sensors, switches, and meters, whereas outputs would possibly embody relays, lights, valves, and drives. 5. HMI – Human machine interface provides interface b/w man and machine. Through HMI we can give input to plc or for changing the parameters value of process.

I am an electrical and electronics engineering working in core electrical automation domain. I am well versatile with PL programming/SCADA /HMI / electrical wiring and designing. I also hold expertise in image processing and neural networks

Hello, I have through your project requirements and I am confident that in my ability to produce timely, factual plagiarism free engineering articles. I am a recent electrical and electronics engineering graduate with experience in simulation software such as TINA TI, AWS microwave office , kicad , proteus , MATLAB, VHDL and PLCs. I published an article (DESIGN AND SIMULATION OF A REDUCED FREQUENCY LOW NOISE BLOCK SATELLITE DOWNCONVERTER ) on researchgate . This design was made using AWS microwave office. Regards, Abednego Arego.

Hello Sir, I am electronics engineer and worked on multiple documents such as fmea, system architecture, hardware - software interface etc. Also I had filed 5 patents in electronics domain Please message me to discuss more

I am a fan of electronics and programming and I love having fun with Arduino Raspberry Pi and Python. I love to create IoT, robotics and more projects. Follow me on Instagram "Raspuino" to see all my projects.

I have Professional Knowledge about IC, Electronics device and Electrical equipment. I am a Engineer (BSc in Electrical & Electronic) , also I can write good English. Please Chat with me for sample work and other information.