Magreader and gsm/gprs modlue

Hi Below you can find a description of what I need: For Security project. We are looking for a person with high experience in GSM/GPRS/SMS Data Transimission/Magnetic Stripe card reader wireless video transmission data stored on eeprom or flash memory then transmited to cell phone or [login to view URL] can work on the following project. You will need to incorperate a magnetic card reader from [login to view URL] and wireless video data and you need to attach a GSM or CDMA module from the market to it. After a card will be swiped into the card reader and video data the data has to be sent via GSM module to a phone number of our choice. Summary: 1. Card is being swiped into the magnetic card reader. 2. A gsm module attached to the card reader sends a sms to phone number with swiped data of each swipe. 3. Magnetic reader, reads interrupted swpies, meaning if the card is swipe half way and then back out and then forward at slow montion or faster, magnetic reader still reads data from card. 4. Battery life 52hours non stop rechargeble li-ion battery. 5. Must be compatible with MSR206 and user Friendly. 6. All swipe must be time stamp. 7. The size of the complete PCB Board needs to be as small as possible,but not smaller than: 7.a A wireless video camera transmited connection on the board to send live video data to cell phone or computer. Example Board thickness: 5mm to 6mm once all components are solder on to board. Length: 50mm or a few mm less would be excellent. Width: 20mm or less would be outstanding. 8. The GSM chip insert holder, and li-ion battery can be seperated if needed, does not need to be inbeded with main board. 9. Min USB RS232 or a smaller usb unit inbeded onto the main board to confi or change reader setting ect. Thank you!