Usb design pcb jobs

I'm currently using AT2020 USB for live music performance and encountering the issue of limited mic range. I need a highly-skilled audio engineer or someone knowledgeable about audio equipment for live streaming. Key Responsibilities: - Provide expert advice on improving the range of my current setup. - Suggest upgrades or modifications that can increase the quality of the sound system for live streaming performances. Required Skills: - Experience with live stream audio setup for music performance - Detailed understanding of a variety of audio equipment including microphones (particularly wired ones like my AT2020 USB), mixers, and PA systems - Problem-solving abilities with sound system challenges - Ability to communicate complex technical advice in a way I can un...

I'm seeking an experienced PCB Design Engineer to develop a small, multilayer PCB using Altium Designer. Requirements: - The PCB should be small in size - The design needs to be multilayered - Proficiency with Altium Designer is essential Please note that the project does not involve any other software beside Altium. The project is urgent, so timely completion is a crucial factor. Ideal Skills: - PCB Design with Altium Designer - Experience with small, multilayered PCBs - A track record of delivering projects on time Looking forward to your proposals.

Hi, I am looking to connect a mobile device (smartphone) with a / any robot (ABB, UR, FANUG, ...). I need a professional that can make a concept how to send data from the smartphone to the robot and from the robot to the smartphone, given the following strings: - USB, WiFi or Network cable allowed for data transfer - direct communication from smartphone to roboter and way back without intermediate server - if possible don't us a PLC (unless it is the own of the robot) - data send is a few ASCII characters both ways - protocols must be open source or commercially available for the smartphone and robot - if possible don't use OPC/UA Deliverables: - concept how to connect a smartphone with a robot - components that need to be purchased (incl. source) - protoco...

I'm looking to have a simple and basic circuit designed for a consumer electronic device. The m...for a consumer electronic device. The main specifications for this project are as follows: - Purpose: The PCB design should be specifically tailored for consumer electronics. - Size: The PCB needs to fit within a compact area, limited to less than 10x10 cm. This will require the designer to be adept at compact and efficient design practices. - Complexity: The circuit itself is rather straightforward, similar to a basic LED circuit. No multi-layer, high-speed signal processing is involved. Ideal skills and experience for this job would include: - Proficiency in consumer electronics PCB design - Strong grasp of basic circuit design princ...

I'm looking for a skilled PCB designer to create a simple board for circuit prototyping. Key Requirements: - The design should fit within dimensions ranging from 5x5 cm to 10x10 cm. - The board would primarily include passive components and miniature ssrs, so experience with these is crucial. - No specific components to be included apart from the passive components and miniature ssrs.

I'm looking for a skilled developer to create a unique, comforting feature for a teddy bear gi...gift. - Purpose: This module will record my breathing to provide a personalized and comforting experience. - Interaction: The user should be able to play back the recorded breathing by pressing a button on the teddy bear. The recorded breathing should be continuous on a loop. - Audio Quality: I prefer high-definition to ensure a clear and crisp sound. -Other Notes: I would like the module to be usb chargeable if possible. Ideally, you should have experience in: - Embedded systems or IoT for creating the recording module - Working with high-quality audio recording - Developing interactive features in soft toys or similar products If you're able to bring this project to lif...

PCB design for a scale with a 4G module to send results to WebServer using HTTP Post. Circuit is intended to be powered from battery with a support of solar panel. MCU will STM32 and 4G GSM module will using SIM7000

Looking for an expert in PCB design with hands-on experience in Fusion 360. I have completed a schematic that requires transformation into a PCB layout, adhering to several specific constraints. I am expecting: - Proficiency in Fusion 360. - Ability to accurately follow detailed instructions related to layout constraints. - Extensive understanding of PCB fabrication processes, more specifically conventional PCB fabrication. So, if you consider yourself an seasoned PCB designer with the ability to follow precise specifications, I would love to hear from you. Join me in bringing this project to fruition.

I have an Excel file that is corrupted and won't open. The latest version has over 5000 columns which I need retrieved. I have a previous version of the Excel file with over 4500 columns. The Excel file was last saved on a USB and I am using Excel 2016. I do have a backup copy of the corrupted file. Key Tasks: - Recover the latest version of the Excel file with over 5000 columns. - Integrate the data from the previous version (4500 columns) into the latest version. - Ensure all data is intact and functional. Skills and Experience: - Expertise in data recovery and Excel. - Proficiency in Excel 2016. - Attention to detail and thoroughness to ensure that all 5000+ columns of data are successfully retrieved and integrated. Please bid with a specific plan on how you will tackle t...

...am in need of a PCB designer with experience in developing multi-layered boards for prototyping purposes. We have an existing design that needs some simple changes. This should be a short/fast project. Key Requirements: - Experience with ESP32-S3 - The design should be optimized for a multi-layer board (two layer if possible) - The board will need to integrate microcontrollers, an ePaper display, and power management components - Experience in designing PCBs for prototyping required - Currently the design uses a TTL connection for uploading firmware Your tasks will include: - Understanding the project requirements and goals - Make necessary updates to design files - Assist software (firmware) team in loading/executing firmware (Arduino IDE) - Desig...

...Device-Specific Mail Access: Utilize Intune to restrict email access to designated devices only, ensuring security and compliance. Prevent File Copying and Downloading: Configure settings to prohibit users from copying or downloading attachments within emails, safeguarding data. Local Data Storage: Enforce policies to store email data solely on the device, enhancing data security. USB and Bluetooth Blocking: Utilize Intune to block USB and Bluetooth data transfers, mitigating potential data breaches. Browser and Social Media Blocking: Restrict browser access and block social media apps, including WhatsApp, to maintain focus and security. App Management: Prevent app uninstallation and installation, reserving these privileges for admins only, ensuring app integrity. Out...

URGENTT PROJECT. The project would be to design and build a PCB device and 3D Printable enclosure that supplies power via POE (power over Ethernet) to equipment and can accept a standard construction equipment battery from a manufacturer such as Dewalt, Ryobi, etc. to provide the power to the attached device. There should be 2 Ethernet ports (an incoming and outgoing ethernet port) supporting 5Gbps and the power draw will be selectable via switch or button. The power will need to conform to the standards for 802.3af (POE), 802.3at (POE+), and 802.3bt (POE++) and include a power meter that shows the amount of battery power remaining. A USB-C port should also be included. The enclosure should be 3D printable.

I require an intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in the signal. There is a...

Change the position of CC1101 and then change the size of the enclosure

...are seeking a highly skilled PCB designer to develop a custom board featuring the RP2040 microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design...

...Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a specified RF signal from Part B it activates its predesigned ...

I am in need of an experienced PCB designer who can create a small PCB module with the following features: - ESP32 - SIM module - Gyro - Battery backup with charging port Ideal skills and experience for this job include: - Extensive experience with ESP32 and SIM modules - Proficiency in PCB design software - Knowledge of battery technologies suitable for motorbike use - Understanding of gyro and sensor interfacing - Ability to design a compact PCB (less than 5cm x 5cm) Please provide samples of your past PCB designs in your bid.

...background to handle an on-site installation of computer peripherals and networking devices, including a DVR/NVR and Point of Sale (POS) systems to a retail shop inside the Airport terminal. Key Details: - The project involves the following: 1. Connecting a POS computer, monitor, receipt printer, USB card reader and providing remote access to our helpdesk so our techs can configure the system. Work with our helpdesk to test the printer, touchscreen and card reader. 2. Connect a USB camera that measures foot traffic and work with our help desk to configure and test. 3. The building contractor has already set up Ethernet cables and a patch panel. Ideally, you will have tools in case one of the jacks doesn't work it can be tested and crimped quickly instea...

I'm seeking a PCB engineer who's proficient at PCB layout design, circuit analysis and troubleshooting, and component sourcing. The project entails: - PCB Layout Design: The project calls for a standard size, multi-layer PCB. The ideal candidate should have the ability to design and implement PCB layouts that are both efficient and effective. - Circuit Analysis and Troubleshooting: The successful candidate will need to be able to analyze and troubleshoot circuits efficiently. They should be knowledgeable in a variety of circuit types and be able to deal with complex circuits. - Component Sourcing: The project also involves sourcing the necessary components for the PCB. The right candidate should be able to locate qua...

I’m looking for a professional to review and optimize my PCB layout design. The aim of this review is to identify any design errors, ensure proper component placement, and validate the power and ground connections. Key tasks include: - Identifying design errors: Your role is to meticulously go through the PCB layout and spot any potential design flaws. - Checking component placement: It's crucial to ensure that all components are correctly placed and oriented as per the design requirements. - Verifying power and ground connections: A thorough check on power and ground connections is vital to eliminate potential circuit issues. Your expertise in PCB layout design, analysis tools and techniques will be a valuable ass...

I am looking for someone skilled in the field of STM32 programming, with expertise on Wiz5500. We already have a working firmware running on our custom PCB that uses the Wiz5500 to display a web page with basic interfaces. The project consists in modifying that firmware to integrate two new features : 1) After sending data from webpage to mcu, we cannot use the web browser refresh button because it re-sends the data again. We want to fix this by either re-directing automatically to the main webpage after sending data or some other way you can propose. 2) We want to synchronize the mcu with the local time. This can be done by synchronizing with the NTP server or some other way you can propose. We would like the webpage to keep working during the synchronization with NTP serve...

...the following functionalities: - Virtual COM via USB - Embedded C programming - Keil MDK 6 integration In addition to these core requirements, the project must also meet performance constraints - this must be carefully considered throughout the development process. I'm looking for a freelancer that is able to develop the code from scratch. It's important that you have a solid understanding of embedded systems, as well as experience with USB communication protocols. Your familiarity with Keil MDK 6 is also crucial as it will be the primary IDE used for this project. A background in working with STM32 microcontrollers will be a big plus. In summary, the main tasks for this project include: - Design and implementation of a Virtual COM via USB - De...

I’m looking to make a smart controller that can integrate with 12v compressors for inflating tires on off road vehicles. Mainly I need the the pcb and electronics designed and I can make the housing and everything else. If you would also want to design the housing in ok with that. Needs to be almost waterproof. Mainly splash proof and heat resistant. It will be mounted in the engine bay. As far as the controller goes all it need to be able to do is check pressure from a pressure sensor that will be connected in line from the compressor and control a 12v output source(5a at 12v) to trigger the compressor to turn on as well as for deflating need a valve to be controlled to air down to set pressure. Looking for keep it as simple as possible. Only gonna need about 4 buttons...

I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life in a timely and...

I'm looking for a skilled PCB designer to help me repurpose an old laptop keyboard and monitor to work via a desktop host. Key Project Features: - **Repurposing Old Hardware**: The main aim of this project is to make use of an old laptop's keyboard and monitor. The PCB should make it possible to connect these to a desktop host. Ideal Skills and Experience: - **PCB Design**: You need to have a strong background in designing PCBs. It's crucial that the PCB you design supports USB and HDMI connectivity, and allows for key mapping and backlight control for the keyboard integration. - **Embedded Systems**: Experience with embedded systems is a big plus as it helps in seamlessly integrating the keyboard and monitor to the deskto...

I am personally embarking on my master's project, necessitating an expert in Altium for a basic PCB layout design. While the overall complexity anticipated remains on the basic side with limited components and layers, the designer's prowess in utilizing Altium effectively will be respected and appreciated. Skills and Experience: - Mastery of Altium software - Proven experience in PCB layout design - Affinity for crafting basic designs with few components and layers.

We are looking to develop an e-commerce website dedicated to diagnostic tools, similar in function to but with a design inspired by balticdiag.com. The site should be user-friendly, functional, and visually appealing, catering to automotive professionals and enthusiasts. Upload all the products from in the same form they are listed there. Key Features Needed: 1. Product Organization: • Products must be meticulously categorized under the following categories: • Truck Diagnostic Tools • Off-Highway Machinery • Agricultural Machinery • Forklift & Logistic Equipment • Marine Engines, Boats, and Jet-Skis • Motorcycles, Bikes, and ATV/UTV 2. Interactive Product Listings: • Implement a drop-down menu system similar to that on for an efficient...

...home should be not just a castle, but an emblem of harmonious fusion of history with the present and future. Property To Be Built In Ghana Specifically Brong-Ahafo Region Architectural Drawings Structural Drawings. Plumbing Drawing. Sewerage drawing. Electrical Drawing plans. Interior and exterior elevation. Interior Design Furnishing ETC. 4k render video walk-through of the whole property. The property must look as realistic as possible in the render. Interior and exterior design This includes furnishing. The castle is to be a minimum of 10,000 meters squared. An estimated material list for example 1 ton of cement 2 tons of steel etc. The castle is to be built on a 2-acre plot and Castle to be situated Directly in the center of the Plot. The castle should be raised up a...

Raspberry PI CM4 carrier board design The project consist in the design of a CM4 carrier board whit specific requirements. All connections with ended with JST connectors, (except the antenna of the AIS, to be decided). The original idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programmin...

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehensive analyses of each component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple ICs Once the project is completed, along with the BOM file and GARBER file, the PoC project also has to be submitted. IMP: Freelancers must sign an NDA before beginning to work on...

I'm looking for a skilled and experienced electronic engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your p...

I've nearly completed a PCB layout using Altium Designer, but need help finalizing it. Key Requirements: - Adding an "On/Off Button": I need an experienced designer to integrate this feature into the design. This will require a deep understanding of PCB layout and design principles to ensure it's correctly implemented. Ideal Skills: - Proficient in Altium Designer: You must have a strong background in using this software to work on the incomplete PCB design. - PCB Design Experience: A solid grasp of PCB design principles and best practices is essential to successfully finish the layout. - Previous Completion Projects: It would be beneficial if you have a track record of completing PCB design...

I'm in need of an experienced PCB designer who can modify a trace routing on a PCB gerber file. The specific requirement is to interrupt one of the traces, but ensure it can be easily jumpered. Key Requirements: - Expertise in PCB design and Gerber file modification - Ability to efficiently modify trace routing while maintaining the original design integrity - Understanding of how to create a jumper-friendly trace interruption Ideal Candidate: - Prior experience with similar trace routing modifications - Great attention to detail and an understanding of the importance of trace integrity in PCB design - Ability to communicate effectively to ensure the requirements are fully understood and implemented

This is an extended version project of previous AMS5915 Pressure Sensor PCB with integration to extra features

This project consist of following phases for its prototype development. Phase 1. Hardware Design 1. Schematic design 2. PCB Design 3. BOM (Bill of material) , PCB Gerber 4. PCB Fabrication 5. Components/Part procurement 6. PCB assembly Phase 2. Firmware/Code development and PCB testing Deliverables will be as given below: 1. Source PCB files 2. PCB Geber 3. BOM (Bill of material) 4. Source firmware 5. One working Prototype

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehensive analyses of each component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple IC's Once the project is completed, along with the BOM file and GARBER file, PoC project also has to be submitted. IMP: Freelancer must sign an NDA before begin workin...

Create PCB with eps32 and relay in Easy eda

...specifically designed for Raspberry Pi Compute Module 4. Features: - It should include an Ethernet - Type-C USB port power power. - We're also looking at equipping it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equivalent 4G mobile module that works in Australia on T...

Please turn this photo into a STL file- Box is 7x7x3cm Also make a lid that fits the top. inspired by other photo, on the with same text either engraved into the lid or standing out The holes on the side of the box should all be removed. In the left there should be a USB C port in the right there should be a 8mm hole for ethernetcable

Hello, i need someone good programmer who is able to modify ASF CDC echo example for atsamd11d14 mcu. When receive '1' by CDC -> set 2 pins of mcu When receive '0' by CDC -> reset these 2 pins of mcu And i would like device to be visible in Device Manager or Linux like 'USB CDC'

I require the development of a Printed Circuit Board (PCB) based on provided schematics and design guidelin. This PCB is specifically designed to amplify signals from a silicon PIN diode used to sense gamma radiation. Top Features: A PIN photodiode, four low-noise op amps and a comparator are used to detect individual photons of gamma radiation. Expertise: - A solid background in PCB design and experience in providing PCB manufacturing data Expected output: • Schematic and Source data in EAGLE or Protel 98/99/SE/Altium/Protel-DXP format. • Extended Gerber File RS-274X. • Bill of Materials (BOM) in Excel format, based on components from Digikey or Mouser. • Pick-N-Place / XY-File. Please share relevant experience and sample w...

I need a proficient Embedded Engineer to design a PCB prototype for cryptocurrency mining. More details will be shared over a chat

...Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a specified RF signal from Part B it activates its predesigned ...

Add opti coupler and necessary resistance in pcb Cuhange the lid of the enclosure for new laser sensor

I'm seeking an expert in circuit design for consumer electronics. Very simple design with two LEDs when one LED is on the other will turn off. Very simple. Need schematic and BOM. NO pcb layout or gerber files needed. Please look at attached PDF before messaging me. MUST INCLUDE PROJECT NAME LISTED ON THE ATTACHED FILE IN MESSAGE TO ME OR YOU WIL NOT BE CONSIDERED Key requirements: - Knowledge and experience in circuit design, with a preference for consumer electronics - The ability to translate concept into a viable, efficient circuit design - Strong communication skills to understand the intended application and adapt the design accordingly Please include in your proposal examples of past consumer electronic circuit design project...

I'm looking for a proficient designer for circuit schematics and PCB layouts. The task is pretty straightforward. Specifically required skills and experiences include: - Ability to design simple circuits and PCBs. - Knowledge in component selection, particularly microcontrollers. - Proficiency in working electronics design tools. Your role will be vital in our operations, and I am keen on engaging someone who can deliver exceptional work repeatedly. A deep understanding of microcontrollers will significantly increase your chances of landing this gig.

I'm in need of a skilled Java programmer who can help me with my PCB project. This project specifically involves the development of a control system for a motor. Key Requirements: - Experience in programming PCBs with Java - Background in control system development - Proficiency in motor control Your primary task will be to create a control system that effectively manages the motor. Your expertise in Java will be crucial, as this language has been chosen for the project. Specifically, the control system should be able to: - Efficiently regulate the motor's operation - Interface with other components on the board - Ensure the motor responds appropriately to external stimuli To ensure the success of this project, I need a freelancer who is not only skilled in Java progr...

I am in need of an experienced electronics and software engineer to help me enhance an existing automotive electronics product. Key Responsibilities: - Circuit Design: You'll be creating new circuits or modifying the existing ones to improve the product's functionality. - PCB Layout: You'll need to come up with new PCB layouts that accommodate the changes in the circuit design. - Embedded Programming: Ability to reprogram existing embedded systems for better performance and integration of new features. Requirements: - Proficiency in Circuit Design, PCB Layout, and Embedded Programming. - Experience in working with automotive electronics is a big plus. - A proactive, problem-solving attitude towards improving the existing product. ...

Description: Are you skilled in PCB design and proficient with Adobe Illustrator? I'm in search of a talented freelancer who can accurately trace a PCB design from an image and generate Gerber files for manufacturing. The task involves replicating the PCB layout precisely to ensure compatibility with production requirements. Key Requirements: Proficiency in Adobe Illustrator for PCB design Experience in tracing complex designs with attention to detail Ability to generate Gerber files for manufacturing Project Details: You'll be provided with an image of the PCB layout, and your task will be to recreate it faithfully in Adobe Illustrator. The final deliverables should include high-quality vector files and Gerber files ready...

I have an application in Ubuntu 16.04 that's written in C++. It randomly crashes every few hours, and I suspect it may be related to the usb microphone. I need an expert in debugging to diagnose and fix the issue. Key Points: - The crashes are occurring during idle or background processes, but I'm not entirely certain of the exact trigger. - The freelancer must be fluent in C++ and have a high level of proficiency in debugging on Ubuntu systems. - Prior experience with usb microphone-related issues in C++ applications is a plus.