Ansys beam beam joint jobs
I'm in need of an expert who can help me evaluate the heat transfer performance of an HVAC system through thermal modeling and CFD simulation. Key Project...simulation should be able to provide insightful data on the system's heat transfer efficiency and possible areas of improvement. - Your expertise in thermal modeling and CFD simulation will be crucial to the success of this project. Skills/Experience Required: - Prior experience in conducting thermal modeling and CFD simulation, ideally within HVAC systems. - Proficiency in software tools such as ANSYS Fluent, SimScale, or Autodesk CFD is a plus, although not mandatory. - Understanding of heat transfer and its application within HVAC systems. - Ability to interpret simulation data and provide actionable insights for ...
I require a modern logo design for my Punjabi food hotel. The ideal candidate should be well-versed in creating logos with a modern aesthetic. Since I'm looking for a combination of text-based and icon-based design, experience with both approaches would be beneficial. Please note that the colors to be incorporated in the logo were not specified. Hence, I'm open to suggestion...ideal candidate should be well-versed in creating logos with a modern aesthetic. Since I'm looking for a combination of text-based and icon-based design, experience with both approaches would be beneficial. Please note that the colors to be incorporated in the logo were not specified. Hence, I'm open to suggestions and would appreciate it if you could present me with some options. NAME OF F...
I'm looking for p...will include: - Identifying if the wall is indeed a retaining wall. - Providing estimates for the cost of installing a wooden beam, considering the removal of the wall. I would need someone local preferably to come out and identify if this wall is load bearing or not (circled in red). I plan to open this wall up- if it is load bearing I need to be setup with a contractor that can install a beam for me. But I want to know if you can determine remotely if this wall is load-bearing? If it isn't load-bearing, I can handle the work myself. However, if it is, I'll need to hire someone to complete the task. Proficiency in cost estimation and experience with wooden beam installations is preferred. I anticipate careful handling and minimal ...
I am currently dealing with a dispute between directors involving repayment of director's loan, drawings by directors and joint management of banking. I require help from a skilled freelancer proficient in business. Must have experience in this jurisdiction. Your role will involve: - Understanding the current situation and the concerns of each party - Strategizing possible resolutions that ensure fair profit distributions The ideal freelancer should have: - Demonstrated business background - Experience in managing disputes specifically related to profit sharing - Excellent communication skills and the ability to facilitate challenging discussions On application, share your: - Relevant experience in dealing with company disputes, with a special focus on profit-sharing d...
...understand our philosophies as a company and an online store where visitors can purchase merchandise related to our films. We want the page to be both intuitive and stylish. Inspirations - I like the cursor tracker on this page - General Layout is appealing to me - Like the Loading bar for this website, potentially relate it to “BEAM”...
Hi, I need a structural engineer to design a steel i beam for a 20' 3" span (wall between kitchen and living room is being eliminated) and a second Steel I beam for a 23 foot span beam in the center of the family room.. I want the I beam to be completely hidden in the floor joist which are either 2x8 or 2x10 floor joist. These beams are for a cape cod style house the address is 56 Hale Rd Glastonbury CT 06033. Above the Family room there is a flat roof, above the kitchen and living room there is living space and a roof . Please let me know if you need anymore information.
I'm seeking a skilled and creative logo designer to craft a logo that primarily embodies an elegant and sophisticated style. The logo will serve as a tool for professional representation and will be used primarily on print materials such as business cards and letterheads...sophisticated style. The logo will serve as a tool for professional representation and will be used primarily on print materials such as business cards and letterheads. Key project requirements include: - Creating a logo that exudes elegance and sophistication for professional firm - Ensuring the logo is suitable for print on business cards and letterheads - Looking for a sophisticated lighthouse, with a beam of light shining to the side - Firm name is: Harrison, Anderson Associates Moto: Guiding Suc...
I'm in need of a well-designed Self-Defense Training Dummy specifically for martial arts training purposes. Key Features: - Durability for Repeated Use: The dummy should be able to withstand consistent training sessions without any damage. - Realistic Joint Movement: The arms and legs should be able to move naturally, offering a realistic experience for the practitioner. The ideal freelancer for this project should have experience in: - Industrial design, specifically in creating training equipment. - Knowledge of martial arts or experience with designing related products. - Ability to deliver a durable and realistic product.
Seeking a professional with expertise in Ansys electronic software, capable of conducting a detailed electromagnetic simulation. The project is centered on electromagnetic dampers, requiring an in-depth simulation and analysis to assess and refine our designs. - Handle electromechanic simulations - Evaluate and improve current dampers design You need to have prior experience with electromagnetic simulations, particularly within the scope of dampers. Knowledge in engineering projects involving similar systems will be highly beneficial.
I am looking for someone with an in-depth knowledge of Ansys Electronics software who can assist me in simulation modeling. The task at hand involves creating an electromagnetic simulation. Desired Skills and Experience: - Proficiency in Ansys Electronics - Strong experience in Simulation Modeling - Specialization in Electromagnetic Simulation Modeling The perfect freelancer for this project must have a practical understanding of how to use Ansys Electronics for simulation modeling, specifically in generating accurate and efficient electromagnetic simulations. Your demonstrated experience would be paramount for this assignment.
I'm seeking a talented copywriter with experience in translating complex medical concepts into Turkish for my pain management clinic's website. Key Requirements: - Specialization: The copywriter should have extensive experience in medical copywriting, preferably in the area of joint pain management. - Patient Testimonials: The website should include real patient testimonials, so the copywriter should be skilled in incorporating these into the overall content. - Language Level: The content should be highly technical to cater to medical professionals, ensuring a precise and accurate representation of our clinic and services. Your role will be crucial in helping us connect with our Turkish-speaking audience. A deep understanding of pain management and medical terminology i...
I'm currently seeking a professional with extensive experience in structural engineering, especially older homes. My property is an 1890s house in Michigan requiring structure optimization for joist, rafter, and beam/collar tie to better withstand our moderate winters. Unknown to me is whether or not the house currently has issues. However, when I opened up to see the framing, I discovered both damaged or rotted wood, and what appears to be inadequate support or bracing. The ideal freelancer for this job should: - Be highly knowledgeable about structural engineering, especially for older constructions. - Have extensive experience with the assessment and treatment of damaged/rotten wood. - Be capable of designing and implementing robust structural supports. Being familiar wi...
Floor joist and beam plan Autocad sheet needed for house plan
I'm seeking a skilled individual who can perform a high level BLDC motor simulation using ANSYS Maxwell and Infolytica MotorSolve.
If you have a creative mindset, a strong understand of social media platforms and a drive to excel in the fast-paced world of digital marketing, we want to to hear from you. Joint us and take your carrer to the next level. A business owner seeking to boost online visibility, I need an experienced digital marketer whose key focus lies in social media marketing. Although the user preferences for specific platforms weren't provided, proficiency in all the common platforms such as Facebook, Instagram, and Twitter is highly beneficial. My business caters to both B2B and B2C markets, so it's crucial that you know how to effectively tailor campaigns for these distinctive audiences. Desired skills and experience: - This is performance based project - Must communication skills...
...wall was removed between a kitchen and a dining room. The builder put in a steel beam which he said was stronger than necessary, but he also said that it would need signing off. He said that whoever inspected would want to see that the pad stones or cap stones had steel reinforcement in them. Ordinarily this would be the man from the council. I want an independent engineer. I am naively thinking that I need a certificate to say that this is safe and that it complies with Building Regulations. The quote I have had was to do calculations based on my measurements, with the proviso that it was based on my measurements, that the engineer had not visited and was not commenting on any brick walls supporting the beam, or the foundations. I'm not convinced that would ...
Am doing a project using a simple shell and tube heat exchanger design and I have a problem with Ansys fluent validation. I already drew the shell and tube heat exchanger, simple design. However, the problem is that am unable to get similar results as the actual value when it comes to pressure drop. for flow rate 1 am getting it correct, but mass flow rate 0.5 and 2 kg/s are different and far from the actual values for the pressure drop of the shell outlet. I need someone that can fix the issue achieve at least 6% or less error compared to the actual value.
I'm in need of a structural engineer or a person with a relevant background in load-bearing support. The project involves the use of I beam sections, particularly an ISMB-300 beam acting as a column and another ISMB-300 beam acting as a beam. Specific Details: - The ISMB-300 beam will connect to the web of an ISMB-500 column. - The ISMB-300 beam will connect to the flange of the ISMB-500 column. - The connection will be executed by 3 - 20mm diameter bolts. - The I beam sections will be put to use in an industrial environment. - The load anticipated for these I beam sections is a medium load, ranging from 5 to 15 tons. Ideal candidates for this project should have a strong understanding of load-bearing support structures, and ...
I'm in need of an expert in ANSYS software to perform a range of structural and/or thermal analysis tasks that are essential for my product development. Key Requirements: - Experience in ANSYS: As my ideal freelancer, you should have a strong command of ANSYS software, with a proven track record of using it for structural and/or Thermal analysis. - Product Testing: You'll be required to perform a series of tests on the product design, including a drop test, pressure test, load test, load distribution and thermal distribution analysis. - Comprehensive Structural Analysis: The primary goal of the project is to conduct a thorough structural analysis. This includes identifying stress points, testing material durability, and simulating real-world conditions. Ma...
...behaviors of steam vapor and condensate. - Proficiency in analyzing fluid flow, power, and pressure drop. - Knowledge of steam hammer and heat pipe behavior for this application. - Experience with developing engines within the 1-5 kW power output range is essential. Ideal Skills: - Proficiency in CAD software, such as SolidWorks. - Experience with thermal/flow simulation software, like ANSYS or COMSOL. - Knowledge of material science and heat-resistant materials. - Experience working on patent prototypes is a plus. Scope: First 10 hours: - Review existing design and analysis - Conduct initial thermodynamic analysis, heat transfer, and 3kW power calculations - Identify key components and materials Second 10 hours: - Create preliminary design of the ...
I need an expert in Ansys Fluent who can complete a heat transfer simulation setup within a one-day deadline. The specifics of the assignment are: - simulation - Heat transfer simulation with a focus on conduction - Post-processing analysis Freelancers should have a background in Ansys Fluent software and should be experienced in dealing with heat transfer simulations, The ability to adhere to strict deadlines is also crucial. Please place your bid if my project matches your skills and experience.
I HAVE A WORD DOCUMENT THAT FEEDS VIA AN EXCEL SHEET VIA A COMPLEX VBA .. I need the following to addede: Split of Clients for Buys, Sells, Buy/Sell Spreads, Brokerage, Management Costs Currently, the Excel only allows the input of trades for one client, however, we’d like to have this broken up to at least 3 clients (I remarked client and partner in the meeting, however, we ha...VIA AN EXCEL SHEET VIA A COMPLEX VBA .. I need the following to addede: Split of Clients for Buys, Sells, Buy/Sell Spreads, Brokerage, Management Costs Currently, the Excel only allows the input of trades for one client, however, we’d like to have this broken up to at least 3 clients (I remarked client and partner in the meeting, however, we have some clients who have an account each, plus a ...
...analysis midsection analysis L/4 partial analysis Shear design Hook anchorage length analysis Content must be included. This must be presented, so please carefully write an explanation in English next to each expression. In other words, make it like Sample, but the structure I'm looking for is exactly what Sample 2 analyzes. However, my object of analysis here is a slightly different length of beam, so I need to write an expression to reflect the difference. 1. write an expression to reflect the difference in the length of the beams, using the sample as a guide 2. write an explanation in English next to each equation. (I need to explain this in front of many people, not just after I solve it, so please write an explanation or interpretation principle for each equation. ...
I'm seeking an experienced mechanical ...satellite station keeping applications. Comprehension of the design is a prerequisite, kindly inform yourself through and my YouTube channels, Dennis Plews and Dennis J. Plews. Tasks will include: - Familiarizing yourself with the existing design - Assisting in implementing specific mechanical components into the final design. Ideal candidate must have: - Proficiency in ANSYS level CAD. - Mechanical engineering experience and background. - Familiarity with integrating specific mechanical components. - Understanding of propulsion systems or similar technology would be beneficial. Looking forward to work with someone who can help finish this design promptly and efficiently. Suggestions for improvements are always welcome.
I require an expert in architectural design and construction to design and plan the install of a load-bearing beam. The beam is to span a length between 10 and 20 feet, critical to the support of a structure. Materials preference is wood, so familiarity or specialty with wooden structures is a must. To be successful, you must provide: - Expertise in structural integrity and architectural design. - Experience with wooden materials, especially load-bearing. - Detailed plan for the design, placement and install of the beam. Note the project phase does not involve installation. It is limited to professional advice and planning.
...Computational Fluid Dynamics (CFD) to assist with the simulation of gas flow in a pipe. The goal of this project is to optimize the fluid flow within the system. Key Requirements: - Conduct CFD simulations on gas flow in a pipe system - Optimize the fluid flow pattern within the pipe - Provide recommendations on enhancing flow efficiency Ideal Skills and Experience: - Proficiency in CFD software (e.g., ANSYS, OpenFOAM, COMSOL) - Strong background in fluid dynamics and pipe flow - Experience with optimizing fluid flow systems - Ability to interpret and communicate simulation results clearly Please note that the simulations are limited to gases only. The ideal freelancer would have a strong understanding of CFD principles and the ability to translate simulation results into act...
...analysis midsection analysis L/4 partial analysis Shear design Hook anchorage length analysis Content must be included. This must be presented, so please carefully write an explanation in English next to each expression. In other words, make it like Sample, but the structure I'm looking for is exactly what Sample 2 analyzes. However, my object of analysis here is a slightly different length of beam, so I need to write an expression to reflect the difference. 1. write an expression to reflect the difference in the length of the beams, using the sample as a guide 2. write an explanation in English next to each equation. (I need to explain this in front of many people, not just after I solve it, so please write an explanation or interpretation principle for each equation. ...
...analysis midsection analysis L/4 partial analysis Shear design Hook anchorage length analysis Content must be included. This must be presented, so please carefully write an explanation in English next to each expression. In other words, make it like Sample, but the structure I'm looking for is exactly what Sample 2 analyzes. However, my object of analysis here is a slightly different length of beam, so I need to write an expression to reflect the difference. 1. write an expression to reflect the difference in the length of the beams, using the sample as a guide 2. write an explanation in English next to each equation. (I need to explain this in front of many people, not just after I solve it, so please write an explanation or interpretation principle for each equation. ...
I'm searching for a professional with experience in regulatory compliance and a background in engineering, to help me with gaining a Professional Engineer (PE) Endorsement to meet legal requirements. I have a Signboard that weight 1720kg to install on I-Beam structure with concrete footing. I want to make sure it is safe and cost effective. Requirements: - Familiarity with PE Endorsement process - Proficiency in legal and regulatory compliance in engineering sector - Able to provide guidance and support towards gaining the PE Endorsement Your role will be instrumental in ensuring I meet the appropriate standards, fulfill requirements, and ultimately gain my PE Endorsement. Your expertise in this area will be highly valuable and will directly impact my professional developm...
I'm seeking an experienced engineer to implement finite element analysis using ansys software. The engineer will perform structural analysis on our steel tank reinforced with u channel on the circular joint under specific load conditions. Primary Responsibilities: - Execute a structural analysis on a steel tank - Consider both static load and hydrostatic pressure loads in the analysis - Use ansys software for the simulation Ideal Skillset: - Extensive experience with structural analysis and finite element methods - Proficiency in using ansys software - Strong understanding of different load concepts: static and hydrostatic pressure loads - Familiarity with steel as a material for structural analysis You should be able to interpret the results of the ana...
Hi Muhammad Adnan S., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
...disassembly joints primarily enhancing recycling purposes. The design will majorly involve the use of wood. - The project focuses on three types of joints - Butt, Lap, Mortise, and Tenon. Each should be designed with dismantling in mind to facilitate recycling procedures. - The ideal freelancer should have significant experience in CNC cutting design, with an in-depth understanding of woodwork joint designs - Familiarity with sustainable design principles, especially concerning recycling, will be highly appreciated. The overall goal is to minimally impact the environment while producing functional and aesthetically pleasing joints. Your contribution will play a significant role in my journey towards eco-friendly woodwork design. Looking forward to professional insights and...
I'm looking for an experienced freelancer to assist in optical design and simulation using Ansys Lumerical software specifically aimed at communication hardware, more specifically, transmitters. Key Responsibilities: - Design effective and efficient optical layouts for transmitters. - Execute and analyze optical simulations. - Ensure that the optical design aligns with communication hardware requirements. Skills And Experience: - Proficient with Ansys Lumerical for Optical Design. - Comprehensive knowledge of communication hardware, especially transmitters. - Proven experience in optical design and simulation. - Must pay attention to detail and be result-oriented. I'm open to discussions if there are clarifications needed. Looking f...
I'm in need of an Ansys expert who can help me simulate a mechanical component and analyze it for stress. The simulation is to be conducted under dynamic load conditions. Key Responsibilities: - Understand the product design and its intended usage. - Create a dynamic loading situation within Ansys. - Conduct a thorough stress analysis of the mechanical component. - Provide a detailed report on the simulation results. You should have: - Proficiency in Ansys, particularly in stress analysis. - Experience in working with mechanical components. - Understanding of dynamic load simulations. - Ability to interpret and present simulation results. Your work will be instrumental in helping us ensure the reliability and safety of our product.
I'm in search of an experienced engineer with a deep ...and wheel rim design. The goal of this project is to conduct a topology optimization of an aluminum wheel alloy rim with a key focus on enhancing its performance metrics. This involves: - Designing for improved handling and grip - Reducing the weight of the wheel alloy rim - Enhancing the braking performance of the wheel The use of state-of-the-art simulation and optimization software such as ANSYS or HyperWorks would be beneficial. The project demands a thorough understanding of vehicle dynamics and wheel design, as well as a strong ability to consider and integrate different performance-enhancing factors. If you possess these rare skills and are able to succeed in this high performance task, then I look forward to he...
I am in need of...tasks at hand include: - Optimizing current thickness of the underwater tank and chilled water pipes - Conducting a detailed analysis on the structure - Implementing bolt connections of plates, plate to plate and plate pipes Ideal candidates for this project should possess: - Proven experience in structural design, particularly in underwater bolted structures - Expertise in using STAAD PRO & Ansys SpaceClaim for detailed analysis - Ability to optimize design elements for cost-effectiveness without compromising safety - Experience with bolt connection design in similar projects As the project is already in the detailed design stage, the urgency of this job necessitates a quick turnaround while maintaining accuracy and precision. I look forward to reviewing y...
...lease in these circumstances and explain whether Gunther is likely to be able to consequently gain vacant possession of the premises." 2. Normal Essay Question (Land Law) - Provide an excellently argued answer to a specific question. "In the law of co-ownership in Northern Ireland, following “severance” the former parties to a joint tenancy will hold as tenants in common, whereas in England the legal title is unaffected and only the beneficial/equitable joint tenancy is severed. Outlining the rationale for this distinction, explain in detail (citing relevant cases) the various methods by which severance can be achieved, highlighting any distinctions between the law in England and the law in Northern Ireland in this respect." The...
...incorporated with a coil. Here's precisely what I need: • Analyze heat transfer within the tank to maintain a low temperature between 0-100°C • Develop an effective solution in response to the details and dimensions provided • Produce a comprehensive report detailing findings, methodologies, and containing relevant diagrams Skills and Experience: • Proficiency in a FEA software package (e.g., ANSYS, Comsol, etc.) • Extensive experience in thermal modelling and heat transfer calculations • Sound knowledge of stainless 304 properties and characteristics • Engineer degree or above in a relevant field Your understanding of stainless 304's thermal properties, coupled with FEA expertise, makes this project a great match for experts i...
3d, cad model, Ansys, designe, simulation
...background in structural engineering, relevant experience in residential projects, and the ability to develop structurally sound designs. •Foundation plan • Foundation details • Plate formwork plan over the ground floor • Plate reinforcement plan over the ground floor • Formwork plan and beam reinforcement over the ground floor • Formwork plan and ground floor pillar reinforcement • Formwork plan and ladder reinforcement • Plate formwork plan over the floor • Plate reinforcement plan over the floor • Formwork plan and beam reinforcement above the floor • Formwork plan and floor column reinforcement • wood Frame/ roof plan • wood Frame / roof details - **Sanitary and Thermal Installations Design**: In additi...
I am seeking an Ansys expert to assist me with a project that involves these key components: - Prism Modeling: I need a detailed model built of a prism using Ansys Software. The prism's shape is a cubic prism. - Magnetic Field Analysis: I require an in-depth analysis of the magnetic field. This will include stimulation to measure the magnetic field distribution within the prism. The ideal candidate for this project would have: Ansys maxwell knowledge background, modelling of prism with x,y,z axis, ansys stimulation knowledge, able to explain the work and able to teach with video recording. This project is important for me, and I need someone who can deliver accurate, detailed results. If you have the skills and experience, I would love to discuss this...
I'm looking for a CFD expert who can use Ansys Fluent to assess the liquid displacement in a cylindrical tank. The tank will undergo different phases including deceleration, pitching, and rolling. Key Requirements: - Utilize Ansys Fluent to model the fluid behavior inside the tank during deceleration, pitch, and roll - Generate a comprehensive report with numerical data and visualizations that clearly show the liquid displacement Ideal Skills for this Project: - Proficiency in CFD, specifically using Ansys Fluent - Experience in modeling and analyzing fluid behavior in various scenarios - Ability to generate detailed reports with numerical data and visualizations Please note that the results of this simulation will be used to assess the liquid displacement in ...
I currently have a need for an experienced Mechanical Engineer. Without any specific project details, I am looking for someone with a wide ranging ta...creating technical drawings. You may be required to work on various types of systems and components, potentially including HVAC systems, robotics, or automotive components. Additionally, proficiency with tools and software is vital. The specifics may vary, but potential options include AutoCAD, SolidWorks, and ANSYS. Ideal skills and experience: - Broad knowledge in Mechanical Engineering tasks - Experience with diverse systems and components - Proficiency in AutoCAD, SolidWorks, ANSYS, or similar tools - Exceptional technical drawing ability If you are versatile and adaptable in the field of Mechanical Engineering, I enco...
I'm looking for an experienced ANSYS Workbench user to perform simulation of interference fit between two steel pipes and develop in a 2D or 3D model. Details of the project are: - You will receive detailed dimensions of the pipes prior to press fit. - The outcome should include visual representation of contact pressure, aiming to match the theoretical contact pressure value of 73 MPa. Ideal candidate should consider the following factors in the simulation: - Young's modulus - Poisson's ratio - Friction coefficient Skills and Experience Required: - Proficiency in ANSYS Workbench - Understanding of material properties and coefficients - Strong skills in mechanical engineering - High attention to detail Your task will be to ensure the simulation resul...
I require an experienced drafter for creating shop drawings for structural reinforcement. This commercial-scale project encompasses beams and columns, slabs and footings, as well as walls an...- Proficiency in drafting software, such as AutoCAD - Solid background in structural engineering - Extensive experience with commercial construction projects - Understanding of building codes and safety regulations - High attention to detail for producing accurate shop drawings Responsibilities: - Developing comprehensive shop drawings for structural reinforcement including, but not limited to, beam/column, slab/footings and wall/partition details. - Ensuring all drawings comply with local building codes and safety regulations - Review and revise drawings, if necessary, to reflect changes or ...
...1/4 inch = 1 foot +++ 1. CREATE TWO (2) NEW Foundation Plan with STRUCTURAL CALCULATIONS plus Elevations (in relation to land contour/slope), Section and Roof Plan with STRUCTURAL CALCULATIONS for 2(TWO) Buildings :: EACH drawing should have a Comprehensive Details Page, for example Foundation Plan should show STRUCTURAL CALCULATIONS on the Foundation Details page which shows Column, Footing, Beam schedule :: Elevation Plan will NOT BE COMPLETE unless both building drawings show placement according to land slope/contour A. BUILDING A - 55' x 58' on a Steeply slope lot - SEE ATTACHMENT :: FLOOR PLAN IS COMPLETE but Window sizes not decided, once decided, modify on floor plan :: I will share youtube render video and we can decide window sizes together :: F...
...high-detail 3D images of a structural reinforced ground beam. These images will be used specifically as presentation materials. Key Requirements: - The images need to be highly detailed, including lighting, shadows, and intricate textures. I'm looking for a realistic and visually appealing result as if it was a photo. - The design should be based on a structural reinforced ground beam supported by helical piles The first image is of the above without concrete with reinforcement steel visible within a plastic wrap - the plastic wrap will have the company logo. The second image is with the the concrete poured in place which covers the reinforcement creating the completed ground beam Maybe have both shown with a house adjoining it so the ground beam forms...
I am seeking a qualified professional structural engineer who can design reinforced ground beams with helical steel piles to work with my company on an ongoing regular basis as our 'go to' consultant The design needs to be value engineered balancing the number of piles required with the size and reinforcement required in the beam Loading of the piles to be specified Once designed be able to produce a 3D model of the beam showing concrete outline, heave protection and all reinforcement which is animated into a construction sequence The reinforcement must be detailed in accordance with British Standards and to allow for offsite fabrication (splice bars) The designs are for similar applications so after the initial input it should just be a case Proficiency in p...
