Freelancers For Hire - Page 4
Showing 46 results
Sponsored Freelancers
-
------> Professional E.E Developer<------ Home Automation, Industrial Automation, IOT System Design, Embedded System Design Mentor Graphics PADS Power PCB with Simulink and impedance simulation to calculated the microwave guidance, Altium included 365 ,Orcad Cadence Allegro 17x, Design Spark, Eagle 7.0 , Proteus...------> Professional E.E Developer<------ Home Automation, Industrial Automation, IOT System Design, Embedded System Design Mentor Graphics PADS Power PCB with Simulink and impedance simulation to calculated the microwave guidance, Altium included 365 ,Orcad Cadence Allegro 17x, Design Spark, Eagle 7.0 , Proteus Simulation, Vision System Matlab PADS/Altium/Allegro/Xpedition/KiCAD/SDW Expertise in Technologies : ISA/RISC/PSoC/SoC/I2C/LINUX/SQL C./I2A/JTAG/S2C/MCLK/Fsync/ADC/DAC/AVR/PIC/ARM/x86-x64 Architecture/MCU/PIC/CPU/GPU/APU/ARM Based Processors and more hardware designing and development. That can be used in automation, signal processing, security, industry, home, offices and education purposes. Mentor Graphics Pads Power PCB Orcad/Allegero/Capture/PCB Viewer Altium Designer KiCAD Circuit Studio Autodesk Fusion Included Eagle Design Spark Proteus For Demonstration Of Simulation MCAD-ECAD Unification Component Library Management SPICE Simulation PCB Layout PCB Manufacturing (CAM) GERBER, BOM, CPL, Pick and Place, DXF, Assembly Drawing, Active BOM I can give you Fastest turnaround and quote availability through PCBWAY, JLCPCB, ALL PCB and Local Manufacturer in your country. ------> 3D Design<------ Device Enclosure Designing/3D of Parts Creator/DXF to 3D/ Stl to STP/ SLDprt to F3d Alibre-DesignArchi CAD-AutoCAD Electrical-3ds Max-Alias-Inventor-Maya-Revit-123D-BricsCAD-Bentley MicroStation-BlenderCAD-BobCAD-CAMCATIA-DraftSight-Delmia-FreeCAD-Femap-Fusion 360-Geomagic Design-IronCAD-JTKompas-3DKeyCreator-KeyShot-Lagoa Lightwave-Luxology-Mastercam-Moi3DNX-Unigraphics-OBJO-nshape-OpenSCAD-Parasolid-Powermill-Powershape-Pro/Engineer-WildfirePTC-Creo-ParametricPTC-Creo Elements-Rhino-SpaceClaim-SOLIDWORKS-solidThinking-EvolveSurf-CAMSolid-EdgeSolid-FaceSTEP / IGES-SketchUp-STL-TopSolid-TinkerCADT-Flex -CADTurbo-CADVector WorksViaCAD-3DVRML / WRLZW-3DOtherRendering-Zbrush-Houdini-Meshmixer-Ink scapes G-Coding. less
Hire Sajid427628
-
Electrical/Electronics design/Automation engineer with 9+ years of experience. Control systems design expert with an emphasis on novel product design. Specializing in Arduino, ESP32, and Raspberry Pi. Proficient in microprocessor systems, PCB/circuit design, schematics, in-person testing and more. Deliverables...Electrical/Electronics design/Automation engineer with 9+ years of experience. Control systems design expert with an emphasis on novel product design. Specializing in Arduino, ESP32, and Raspberry Pi. Proficient in microprocessor systems, PCB/circuit design, schematics, in-person testing and more. Deliverables Include: • Control Systems Design Expertise • Bill of Materials (buy list with sources included) • PCB Design (manufacturing/production sources included) In-Person Hardware Testing • Firmware (tested, modular, scalable) (C/C++, Python, Assembly) Circuit Simulation (Can provide simple systems simulation before production) Expertise in: • Control Systems ? Microprocessors ⌨️ Arduino ? RaspberryPi ?️ ESP32 • Power Systems ? WiFi ☀️ Solar Power ? Batteries ? Ethernet ? Cell (3/4/5G) • C/C++/Python/Assembly ? Multisim, Teststand, MATLAB, Simulink, and more Experienced controls engineer with years in the automation industry. • Programming for Allen Bradley, AB, IDEC, Siemens, Redlion, Automation Direct PLCs, Codesys, Others • Wiring Diagrams • IEC Standard Panel Design • HMI Design • System Upgrades • IoT SCADA • Commissioning Support • Troubleshooting • Budget or High Performance Systems • UL Compliance ⊛ Experience Highlights: • Collaborated with Dr. Haidekker on power microgrid structures • Designed and tested firmware for PCBs, resulting in published research • Enhanced test stand precision and efficiency at ByoPlanet by ~1000% • Improved food service equipment precision and redesigned control cabinets at MP Equipment • Designed and installed packaging manufacturing lines at Niverplast ⊛ Client Focus: • Work with startups, corporations, industrial firms, universities, hobbyists, and individuals • Dedicated to clear communication, meeting deadlines, and attention to detail • Available 24/7 with budget-friendly solutions • Committed to client satisfaction through prompt responses and a positive attitude less
Hire DanielG78
-
Bachelors of Science in Civil Engineering. Structural analysis and design of steel, reinforcing concrete, pre-stressed concrete, and general civil engineering services.Bachelors of Science in Civil Engineering. Structural analysis and design of steel, reinforcing concrete, pre-stressed concrete, and general civil engineering services. less
Hire suiabouceesay
-
Hello: I am just getting started as a freelancer. I've gained many useful skills over the years. On average I get around 50 WPM. My experiences allow me to be competent at data entry copy typing, and proficient with office suites of programs such as MS Office, Word Perfect, Libre Office, Open Office.Hello: I am just getting started as a freelancer. I've gained many useful skills over the years. On average I get around 50 WPM. My experiences allow me to be competent at data entry copy typing, and proficient with office suites of programs such as MS Office, Word Perfect, Libre Office, Open Office. less
Hire TGregory101
-
Electrical/Electronics design/Automation engineer with 9+ years of experience. Control systems design expert with an emphasis on novel product design. Specializing in Arduino, ESP32, and Raspberry Pi. Proficient in microprocessor systems, PCB/circuit design, schematics, in-person testing and more. Deliverables...Electrical/Electronics design/Automation engineer with 9+ years of experience. Control systems design expert with an emphasis on novel product design. Specializing in Arduino, ESP32, and Raspberry Pi. Proficient in microprocessor systems, PCB/circuit design, schematics, in-person testing and more. Deliverables Include: ? Control Systems Design Expertise ? Bill of Materials (buy list with sources included) ? PCB Design (manufacturing/production sources included) ? In-Person Hardware Testing ?? Firmware (tested, modular, scalable) (C/C++, Python, Assembly) ?️ Circuit Simulation (Can provide simple systems simulation before production) Expertise in: ? Control Systems ? Microprocessors ⌨️ Arduino ? RaspberryPi ?️ ESP32 ? Power Systems ? WiFi ☀️ Solar Power ? Batteries ? Ethernet ? Cell (3/4/5G) ?? C/C++/Python/Assembly ? Multisim, Teststand, MATLAB, Simulink, and more Experienced controls engineer with years in the automation industry. • Programming for Allen Bradley, AB, IDEC, Siemens, Redlion, Automation Direct PLCs, Codesys, Others • Wiring Diagrams • IEC Standard Panel Design • HMI Design • System Upgrades • IoT SCADA • Commissioning Support • Troubleshooting • Budget or High Performance Systems • UL Compliance ⊛ Experience Highlights: • Collaborated with Dr. Haidekker on power microgrid structures • Designed and tested firmware for PCBs, resulting in published research • Enhanced test stand precision and efficiency at ByoPlanet by ~1000% • Improved food service equipment precision and redesigned control cabinets at MP Equipment • Designed and installed packaging manufacturing lines at Niverplast ⊛ Client Focus: • Work with startups, corporations, industrial firms, universities, hobbyists, and individuals • Dedicated to clear communication, meeting deadlines, and attention to detail • Available 24/7 with budget-friendly solutions • Committed to client satisfaction through prompt responses and a positive attitude less
Hire frank0077
-
As I am electrical / electronics engineer I have worked during 15+ years. In this during I had fully experience in electrical engineering field and developing the device. Top skill is following: Electronics engineer - Electronic circuit design and simulation, PCB Design - Hardware / Firmware design(Dspic,FPGA,...As I am electrical / electronics engineer I have worked during 15+ years. In this during I had fully experience in electrical engineering field and developing the device. Top skill is following: Electronics engineer - Electronic circuit design and simulation, PCB Design - Hardware / Firmware design(Dspic,FPGA, Ardunio,STM32,Rasberry PI,ESP32, C programming,Python,Java,PyQT5). -Antena design and simulation(CST, Ansys) -DC-DC converter. -High speed communication(RS232,RS485,CAN, GPS, Buletooth) -BMS system Sever, Motor control device. Motor control... Electrical engineer - Designing electrical systems - Lighting & Power - Electrical load calculations and panel schedule - Lightning protection and earthing - Cable sizing - Power distribution & reticulation (schematic & line diagram drawings). I will always respect the customer's needs, accurately understand the customer's intention, and put it into practice. Thank you. less
Hire anderson582
-
I have various of experience and skills in embedded hardware and firmware development projects and PCB design projects before. Programming languages: C/C++ (embedded ,kernel & user space dev.), python(quickies), VHDL/Verilog. E-CAD designer: Excellent in Altium designer, Eagle, Kicad, Cadnece Allegro up to 20 layers...I have various of experience and skills in embedded hardware and firmware development projects and PCB design projects before. Programming languages: C/C++ (embedded ,kernel & user space dev.), python(quickies), VHDL/Verilog. E-CAD designer: Excellent in Altium designer, Eagle, Kicad, Cadnece Allegro up to 20 layers topology PCB design. IDE's: Atmel studio 6.x++, Keil uVision 5, Segger Studio, nRF SDK, Xilinx Vivado, Intel FPGA, S32k Design studio, Eclipse, Android studio, Arduino IDE. uC's: ARM cortex M0/M0+, M3, M4, A7, complete range of ATmel 8-Bit AvR arch. ATmega & ATTiny uC's, FPGA (Zynq-7000, Virtex), Nordic nRF52 Series, STM32 series, PIC microcontrollers. Wireless Low power design: Designing Miniature Ultra low power battery backed ,wireless sensor, networks & computing systems with 2.4GHz & Sub-GHz band receivers. RF design: Demonstrated proficiency in implementing ceramic chip antennas and tuning for best performance. Software Defined Radio(SDR), QPSK Comm. protocols: UART, RS-232 and RS-485 standard serial, i2C, SMBus, SPI, CAN 2.0b, CANopen dictonary, TCP/IP, UDP. Wireless protocol stacks: 2.4GHz Bluetooth 2.0 + EDR, BLE4.0~5.3, Proprietory RF, RTOS: FreeRTOS for Cortex-M0+ & 8-bit AvR's Thank you! less
Hire DennisWW543
-
I have 10 years experience designing and developing PCBs and 4 years experience designing and developing firmware for custom made PCBs with a focus on GSM based communication utilising Telit Quectel and Fibocom modules. Recent projects are as follows: GSM based AC energy & power measurement • Quectel M66 GSM...I have 10 years experience designing and developing PCBs and 4 years experience designing and developing firmware for custom made PCBs with a focus on GSM based communication utilising Telit Quectel and Fibocom modules. Recent projects are as follows: GSM based AC energy & power measurement • Quectel M66 GSM module • ADE7945 energy measurement IC • STM32F072 M0 Cortex controller GSM based temperature and humidity measurement • Fibocom G510 GSM module • R5F100RCASP MCU • DHT11 temperature/humidity sensor GSM based asset tracker • Telit G865 GSM module • STM32F103RC M3 Cortex MCU • Ublox Neo8 GPS module MCU experience: AVR atmega range STM M0, M3 and M4 Silicon labs 8051 based IDE experience: Atmel studio STM Cube IDE Simplicity STM workbench Keil uVision SES PCB CAD experience: Altium Orcad Eagle Modules: ESP32 ESP8266 nRF51822 Arduino Uno DHT11 less
Hire dcornelius7
-
As a profession, I am an electronics engineer who's really passionate in reverse engineering. I am a driven security researcher that is constantly keen to learn new skills and tackle new difficulties. In addition, I've worked on assembly language development professionally. Furthermore, I'm reverse engineering and...As a profession, I am an electronics engineer who's really passionate in reverse engineering. I am a driven security researcher that is constantly keen to learn new skills and tackle new difficulties. In addition, I've worked on assembly language development professionally. Furthermore, I'm reverse engineering and pentesting the Windows bootloader and EXE files. Let's go to work on that project together! Services provided include: 1. Reverse Engineering. 2. Arduino UNO programming. 3. PLC ladder logic programming. 4. SCADA designing. 5. Debugging using IDAPro, Ghidara and Windbg. 6. Circuit design using NI Multisim, Proteus, LT Spice. 6. Designing circuits with NI Multisim, Proteus, and LT Spice My consumers receive excellent service from me. "I am incredibly attentive, available Monday through Friday during normal business hours, and deliver high-quality products in a timely manner." less
Hire osmoscom
-
802.11, Acoustical Engineering, Aeronautical Engineering, Aerospace Engineering, AI (Artificial Intelligence) HW/SWHi, I am Jamal and I have been doing Embedded Systems (Hardware and Software) development for the last 7 years, I have completed 350+ projects related to almost all electronics categories i.e. IOT, Power electronics, Highspeed, RF, HDI, etc. covering both Hardware and Software. My main areas of focus are ...Hi, I am Jamal and I have been doing Embedded Systems (Hardware and Software) development for the last 7 years, I have completed 350+ projects related to almost all electronics categories i.e. IOT, Power electronics, Highspeed, RF, HDI, etc. covering both Hardware and Software. My main areas of focus are Motherboards, SOMs for Microprocessors and FPGAs, Carrier Boards, and HDI boards mainly High-speed products. I have designed and developed several projects for IMX6, IMX8, RK5528, Xilinx Zynq-based SOMs, PCDU and DAU units for LEO earth Sattelites, Carrier boards for CM3, CM4, CN9130, Nvidea Jetson Nano boards, Ethernet and POE products (POE++, POE PD, POE PSE etc). I have worked on following high-speed interfaces - DDR3 and DDR4 - PCIe - Ethernet - HDMI - LVDS - MIL1553 - Ethernet - USB Apart from that, other interfaces include CAN, SPI, I2C, etc I have complete professional expertise in Altium (Licensed), Eagle (Licensed), KiCAD, OrCAD/Allegro, Solidworks, Fusion360(licensed), Thanks Jamal less
Hire JamalQureshi
