Circuit Designers For Hire

  • Circuit Design
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 43 results
  • Hire     Andrii0125
Hire     Andrii0125

    Andrii0125 Andrii0125

    Ukraine $25 USD / hour
    Hardware and Firmware Developer
    Ukraine
    6.4
    27 reviews 27 reviews $25 USD per hour
    I have been working as a hardware and firmware developer over 10 years. - Electronic Circuit&PCB layout design and analysis for EMI, EMC, ESD and high speed compatibility.(Altium designer, Allegro, PADs, Eagle, Kicad, LTspice) - Firmware programming for embedded system(Arduino, PIC, STM32, Wifi,...
    I have been working as a hardware and firmware developer over 10 years. - Electronic Circuit&PCB layout design and analysis for EMI, EMC, ESD and high speed compatibility.(Altium designer, Allegro, PADs, Eagle, Kicad, LTspice) - Firmware programming for embedded system(Arduino, PIC, STM32, Wifi, Bluetooth, PLC&SCADA) - AutoCAD Drawing/Drafting, 3D modeling/Rendering, Electronic case design - RF/Microwave products and broad knowledge of RF systems, understanding of RF concepts such as receiver sensitivity, dynamic range, noise figure, phase noise, and transmitter linearity and power measurements (CST, HFSS, ADS, Matlab) I am guaranteeing the quality and accuracy of our work. To make our employers 100% satisfied we are more than happy to offer a free revision on each project. less
  • Hire Andrii0125
  • Hire     anhvinhdongnai
Hire     anhvinhdongnai

    anhvinhdongnai anhvinhdongnai

    Vietnam $15 USD / hour
    Arduino or ESP32 automation purpose
    Vietnam
    3.1
    5 reviews 5 reviews $15 USD per hour
    Key Competencies ● Design Power inverter. ● Design interface: RJ45, COM, I2C, USART, SPI, USB. ● Components device: Analog, Digital, Filter, Microcontroller, RAM, Sensor, ADC, DAC, RFID RC522, ESP32 camera, SD card. ● Set up computer networking. Configure computer hard and software for automation purpose. ● Remote...
    Key Competencies ● Design Power inverter. ● Design interface: RJ45, COM, I2C, USART, SPI, USB. ● Components device: Analog, Digital, Filter, Microcontroller, RAM, Sensor, ADC, DAC, RFID RC522, ESP32 camera, SD card. ● Set up computer networking. Configure computer hard and software for automation purpose. ● Remote control by computer. Engineering Electronics Electrical Engineering PCB Layout Circuit Design Education Hutech Technology HCM City University session 1997 majors in Electronics-Computer-Automation-Telecommunication- Programming . Electronic and automation Engineer Degree Key I.T Skills ● Programming: High level Assempler(windows API, DLL), languages like assembler (MIPS and X86) AVR, AT89xx, VB6, Assembler, Pascal, C... work over 15 years ● Software : MS Office, Adobe illustrator, Orcad ● Html, js, css, webhook, websocket, http webserver. arduino programming. Other Details References are available on request Mr. Charlie Hien, Former Managing Director of AMTRONICS Company (Vietnam TOSHIBA Air Conditioners Manufacturing), Actual President of VFC Co. Ltd. E-Mail charliehien@gmail.com. less
  • Hire anhvinhdongnai
  • Hire     mozumder007
Hire     mozumder007

    mozumder007 mozumder007

    Bangladesh $10 USD / hour
    R&D Electronics Engineer
    Bangladesh
    5.6
    35 reviews 35 reviews $10 USD per hour
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done...
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done many projects. and they are #iot based load control #iot based dimming fan light #iot based sending data to website #gsm based security project #fingerprint attendance system #advanced pid line following robot #sun tracking solar system #home automation #iot agricultural monitoring system #obstacle avoiding robot # small range radar system using sonar sensor . # Ir remote-based load control circuit. # design and implementation of custom made arduino and stm32 boards . # Bluetooth controlled car . # wireless data transmission using nrf module # Home security device using esp and gsm module. # Mini drone with Esp 32 . # STM32 featured line following robot and many more robotics projects. I have experience about: 1.Circuit Design 2.PCB Design & Layout making using the following softwares : ✅ Altium ✅ Autodesk Eagle ✅ Proteus ✅ Orcad ✅ KiCad etc My goal is to provide : ✅ Best effort and quality for every project at reasonable rate ($) . ✅ Free servicing facility even after completing the project. ✅ The project perfectly within shortest possible time. Even i will try my best to complete my project before the expiration time.Please allow me to complete your project and i am ensuring my best effort for this.I would love to hear more about what would make this project successful for you and explore if we would be good fit to work together.I am looking forward to your response and wish you all the best for you future. So you can completely rely on me. less
  • Hire mozumder007
  • Hire     nikitamorozzz
Hire     nikitamorozzz

    nikitamorozzz nikitamorozzz

    Ukraine $25 USD / hour
    Electronics Engineer & Firmware Developer
    Ukraine
    5.3
    20 reviews 20 reviews $25 USD per hour
    Hi I’m an PCB designer who have 5+ years of experience in designing Power electronics, analog and digital circuit design, RF field and antenna design. Main Skills  Schematic and PCB design  Embedded Software/Firmware development • I2C, I2S, SPI, RS232/RS485, USB • BLE/Bluetooth, WiFi, Zigbee, Lora, RFID  Analog and...
    Hi I’m an PCB designer who have 5+ years of experience in designing Power electronics, analog and digital circuit design, RF field and antenna design. Main Skills  Schematic and PCB design  Embedded Software/Firmware development • I2C, I2S, SPI, RS232/RS485, USB • BLE/Bluetooth, WiFi, Zigbee, Lora, RFID  Analog and Digital circuit design and simulation using Altium, Multisim and Proteus  RF Antenna and Circuit Design and Simulation using CST and Keysight ADS. Development Tools  Keil, STM32CubeIDE, STM32CubeMX  Arduino IDE, IAR, MPLAB X/IDE, MikroC,  Quartus II, Xilinx, Vivado  Altium, Eagle, Dip trace less
  • Hire nikitamorozzz
  • Hire     shahbaz1980
Hire     shahbaz1980

    shahbaz1980 shahbaz1980

    Pakistan $40 USD / hour
    Product Development Company
    Pakistan
    5.7
    15 reviews 15 reviews $40 USD per hour
    I-Techs charter includes design, development, manufacturing, upgrade, support and integration of electronic, telecommunication, IT products and systems for military, civil and industrial customers. I-Techs has managed to build substantial manufacturing and support technical capabilities supported by a very well...
    I-Techs charter includes design, development, manufacturing, upgrade, support and integration of electronic, telecommunication, IT products and systems for military, civil and industrial customers. I-Techs has managed to build substantial manufacturing and support technical capabilities supported by a very well trained and professional workforce and achieved the highest applicable quality standards and rating from international companies. The positive track record of I-Techs in the area of rapid technology transfer and capability creation, effective response to customer's needs won it a solid reputation and led to its adoption by various key customers. less
  • Hire shahbaz1980
  • Hire     AbdAlRahmanSelim
Hire     AbdAlRahmanSelim

    AbdAlRahmanSelim AbdAlRahmanSelim

    Egypt $10 USD / hour
    Embedded Systems Developement Engineer
    Egypt
    3.6
    13 reviews 13 reviews $10 USD per hour
    Undergraduate electronics & electrical comm engineer with 4 years of proven track record of end-user projects from choosing the HW, writing the SW and to PCB design. Also developing MATLAB/C# programs to be linked with Microcontrollers/Arduino. Used boards/microcontrollers: ✅ Arduino ✅ ESP8266/ESP32 ( Node MCU ) ✅...
    Undergraduate electronics & electrical comm engineer with 4 years of proven track record of end-user projects from choosing the HW, writing the SW and to PCB design. Also developing MATLAB/C# programs to be linked with Microcontrollers/Arduino. Used boards/microcontrollers: ✅ Arduino ✅ ESP8266/ESP32 ( Node MCU ) ✅ PIC microcontrollers (PIC16F877A, PIC18F2550, PIC18F4620....etc) ✅ AVR microcontrollers (ATmega328p, ATmega32...etc) Experienced in: ✅ Proteus (Digital Electronics + Microcontroller Simulations) ✅ Multisim (Analog Electronics Simulations & Anaylsis) ✅ MATLAB (GUIs and Non-GUIs and Linking with Microcontrollers) ✅ Altium (Schematics and PCBs Designs) ✅ Eagle (Schematics and PCBs Designs) ✅ easyEDA (Schematics and PCBs Designs) ✅ MPLABX IDE (PIC and AVR Firmware Development) ✅ Arduino IDE (Arduino/ESP8266/ESP32 Firmware Development) less
  • Hire AbdAlRahmanSelim
  • Hire     Devpro11
Hire     Devpro11

    Devpro11 Devpro11

    Morocco $30 USD / hour
    Senior Mechanical Engineer and PCB designer
    Morocco
    4.2
    6 reviews 6 reviews $30 USD per hour
    Hello I am Ait Oubella from Morocco and have been working as a mechanical engineer for 7 years now. In addition, I am working on various projects using Altium. I am using LTspice, Multisim, and proteus for circuit simulation. My major skills are : 1. Mechanical engineering(CAD/CAM, Solidworks, Autocad, Catia ) 2. 3D...
    Hello I am Ait Oubella from Morocco and have been working as a mechanical engineer for 7 years now. In addition, I am working on various projects using Altium. I am using LTspice, Multisim, and proteus for circuit simulation. My major skills are : 1. Mechanical engineering(CAD/CAM, Solidworks, Autocad, Catia ) 2. 3D Modeling and 3D Designs. 3. Product Designs. 4. PCB layout and Design. 5. Circuit simulation. I am very confident with my skills and always make my clients satisfied with the products that I have made. Feel free to contact me at any time for your needs and I am here to help them. Thanks. less
  • Hire Devpro11
  • Hire     ilyarotov02
Hire     ilyarotov02

    ilyarotov02 ilyarotov02

    Russian Federation $10 USD / hour
    Matlab, Simulation: Full time Developer.
    Russian Federation
    3.2
    3 reviews 3 reviews $10 USD per hour
    LET'S WORK TOGETHER!!! My major is physics and engineering. ANY TIME I can help you in many fields: - Matlab and Mathematica, COMSOL, FDTD, Ansys, Solidworks - Mathematics, Physics, Statistics, Mechanics... -AI (SVM, CNN, DT, ...), Pricing strategy, Forecasting - R/SPSS/ - Python, C/C++, C#, WPF, MVVM, Java - Machine...
    LET'S WORK TOGETHER!!! My major is physics and engineering. ANY TIME I can help you in many fields: - Matlab and Mathematica, COMSOL, FDTD, Ansys, Solidworks - Mathematics, Physics, Statistics, Mechanics... -AI (SVM, CNN, DT, ...), Pricing strategy, Forecasting - R/SPSS/ - Python, C/C++, C#, WPF, MVVM, Java - Machine learning, Deep learning, DSP, Image Processing... - CFD, FEM, PDE, FVM, FDM,... - Android and iOS :flutter, java, kotlin, xcode, objective-C, ... ... less
  • Hire ilyarotov02
  • Hire     carloslasan
Hire     carloslasan

    carloslasan carloslasan

    Argentina $15 USD / hour
    Ingeniero Electronico
    Argentina
    4.1
    7 reviews 7 reviews $15 USD per hour
    Electronic Engineer. With more than 10 years of experience in the development of systems based on microcontrollers, DSP and FPGA. from the schematic base design, to the final production, through the PCB design. And programming. Experience in C programming of microcontrollers and DSP. Programming in VHDL of...
    Electronic Engineer. With more than 10 years of experience in the development of systems based on microcontrollers, DSP and FPGA. from the schematic base design, to the final production, through the PCB design. And programming. Experience in C programming of microcontrollers and DSP. Programming in VHDL of FPGA. Ingeniero Electrónico. Con más de 10 años de experiencia en el desarrollo de sistemas basados en microcontroladores, DSP y FPGA. Desde el diseño base, en esquematico, hasta la produccion final, pasando por el diseño PCB y Programación. Experiencia en programación en C de microcontroladores y DSP. Programación en VHDL de FPGA. less
  • Hire carloslasan
  • Hire     toanluloi
Hire     toanluloi

    toanluloi toanluloi

    Vietnam $20 USD / hour
    Electronics Engineer - PCB Layout Designer
    Vietnam
    4.6
    9 reviews 9 reviews $20 USD per hour
    Experienced Electronics Engineer looking to get hired. I have a team (7 members currently, can increase if need), we are working for a USA company(schematic design and PCB Layout, 3D models). - The software we are using is Cadence Allegro 15.7-16.6.10, Altium 14.3 for PCB layout.Orcad Cadence 16.6 for schematic...
    Experienced Electronics Engineer looking to get hired. I have a team (7 members currently, can increase if need), we are working for a USA company(schematic design and PCB Layout, 3D models). - The software we are using is Cadence Allegro 15.7-16.6.10, Altium 14.3 for PCB layout.Orcad Cadence 16.6 for schematic design. CAM 10.5, Genesis and Solidworks 2014. - The board design can be small to large: up to thousand components and high density constraint, high speed signals, PCIe, SFP, DDR3, RF...etc. - Multi layers boards. (2 layers up to 40 layers). - Multi people to work on the board to meet your schedule. less
  • Hire toanluloi

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""