Generator control panel
$750-1500 USD
Paid on delivery
We use C and PIC. But we are open for any economical alternatives such as Arduino. We are located in Turkey so the parts must be available in our country.
The control panel must have the following specifications;
Turn on and off the generator,
Turn on and off a fan,
Turn on and off a light,
Turn on and off a dosage pump,
Has a wi-fi connection (depending on the budget, this specification may be removed or optional), Must show error codes on the display (the display is 128*64 pixel and not a touch panel.).
In this generator, there are 2 solenoid valves. One fills in the tank automatically and the other drains the tank automatically. Also there is a water level probe. When somebody turns on the generator, one of the solenoid valve will work and fill in the tank. When the water reachs to top, the probe will close the valve and the system will start to heat the water and produce vapor. When the water runs out, the valve will work and fill in the tank again.
When somebody turns off the generator, the other valve will work and drain the water in the tank.
During working depending on the customers' request, they may be able to use all specification such as fan, light, pump etc. at the same time.
Our displays technical specification sheet is in the attachment.
We prefer to work with an Indian company.
Project ID: #16893974
About the project
22 freelancers are bidding on average $1255 for this job
hi I am experienced embedded system designer with more than 8 years of experience. I have completed a number of projects here I have read the datasheet of the attached display Please get in touch to discuss it in fu More
Hi I am a post graduate power electronics engineer and having very good experience in product design and development.
Hello, Have a great day. My name is Shahbaz Ali, i am representing I-TECH. We will design, prototype and ship the required device. We already have experienced the IOT based data logging devices. We will take care More
I have long experience with 8-bit and 32-bit micro-controllers. I work with PIC , AVR , ST and NXP micro-controllers. I use KEIL IDE , Atmel Studio and MPLABX IDE . Regarding your project , I can develop the board usi More
Hi,we're all senior software developers,we've just checked your project requirements,we're able to perform your project and you'll be interesting with us,please come in contact with us to discuss for more project detai More
Hello I'm a controls engineer with tons of experience and I can do the job. Please contact me to discuss the details. Best regards, Denis Poduzov
Dear sir, We have work experience in working on the project based on Arduino, Raspberry Pi, STM, NRF controller We have worked on the ESP wifi module, GSM etc. We are in developing the IOT based project More
USER FRIENDLY INTRODUCTION ( my TEAM-freelancers and I) ******************************************************** i myself strong MATHEMATICAL/ STATISTICAL/ NUMERICAL onto computing skills to support your R&D Service More
I'd recommend programming in C, and if you're open to it, the esp8266 module. It's a great wifi module and very cheap. It has an open-source Arduino core developed by the community but I'd recommend against any use of More
I hold master degree in instrument tech and having about 35 years of expertise in real time embedded software and hardware applications. I have done project like this many times in my career.
HI SIR, I worked on ATMEL for same project and I used ATMEGA 32 from ATMEL, but now ATMEL is Microchip family member, if you want robust solution for harsh environment then I suggest you go for lowcost PLC. If you More
I'm supposing you have an industrial cleaning case (metal surface cleaning, meat procesing cleaning, etc.), or it's possible the system will be used for food production or, may be, room heating. It's an usual case wit More
