In Progress

Need PCL program written for my Velocio Branch 1430 > need program in vBuilder format

I have listed the input/output labels used by the vBuilder that correlate to the Branch 1430

drag racing timing system - 2 lanes - a left lane / a right lane

starting line momentary push button (input-C1) to activate the process > on press makes the blue light blink (output-D1) indicating racers can stage.

Each lane - with a startling line infrared beam (as an input) that is there to indicated when the racer is in place --- and when racer leaves. The beam has to stay activated for the tree to start the sequence

Left lane (input-C2) > which turns on left stage LED (output-D2) / Right Lane (input-C3) > which turns on right stage LED (output-D3)

Christmas tree (as its called in the sport) is a an array of lights on a self standing pole. Picture attached

Top bulb > BLUE -- that blinks (only after starting line momentary push button is activated (pushed once) (input-c1)

Array of lights sequence -- top to bottom

left lane Amber light (output-D2) > lights up solid (stays on) while the left lane infrared is blocked - indicating a racer is ready

right lane Amber light(output-D3) > lights up solid (stays on) while the right lane infrared is blocked - indicating a racer is read

a randomized timer between .5 seconds & 2.0 seconds initiates the following light pattern (only if output-D2 & output-D3 is activated)

Amber light (output-D4) > light comes on for .5 seconds

Amber light (output-D5) > light comes on for .5 seconds >> .5 seconds after D4 light goes off

Amber light (output-D6) > light comes on for .5 seconds >> .5 seconds after D5 light goes off

Green Light (output-E1) > light comes on for 3 seconds >> .5 seconds after D6 light goes off

Left Red Light (output-E2) >> comes on -- flashing for 5 seconds ONLY if input-C2 is de-activated before the green light E1 lite > in this condition output-E4 is activated

Right Red Light (output-E3) >> comes on -- flashing for 5 seconds ONLY if input-C3 is de-activated before the green light E1 is lite > in this condition output-E5 is activated

RULE > if both left and right lanes de-activate before green light (output-E1) is lite -- which ever was first is only red light activated and corresponding WIN light is activated

finish line left lane infrared beam (input-C5)

finish line right lane infrared beam (input-C6)

finish line right lane WIN light (output-E4)

finish line left lane WIN light (output-E5)

which ever of input-C4 or input-C5 is activated first indicates winner -- -- if either activated the red light the other WIN light goes on - if both did then who ever did 2nd activates WIN light

Basic explanation of the process between two competitors

Button pushed by starting line official > blue light blinks (indicates racers can stage - which is process of moving vehicle in lanes and break the beam)

left lane infrared broken > left lane amber light turns on (and stays on as beam is broken) >> indicating the racer is staged

right lane infrared broken > right lane amber light turns on (and stays on as beam is broken) >> indicating the racer is staged

Only after both left and right lane amber lights are lite -- randomized timer starts tree count activation of sequence

after green light is on - racers take off -- first one to break the finish line infrared (without red lighting) wins - and win light comes on.

System stops -- then waits for C1 to be pressed for the whole process to start again.

Branch 1430 - 6 D in, 12 D out, 1 RS232/RS485

Skills: Microcontroller, PCB Layout, PLC & SCADA

See more: need articles written tonight, need testing written php multiple choice, need essay written, need articles written, need resume written, need pre written blog, need book written, 300 websites need backend written, need report written, need paper written com, need someone written assignment, companies need articles written internet, need paper written, need ebook written, need script written, need letter written attorney

About the Employer:
( 39 reviews ) Lewistown, United States

Project ID: #23564117

Awarded to:

cesur135

hello i m automation engineer i m expert and i have finished many projects water treatment,iron steal plant,machine automation etc.. i can do let [login to view URL]

$166 USD in 5 days
(8 Reviews)
3.1

2 freelancers are bidding on average $133 for this job

writiqueproject

As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Alt More

$100 USD in 2 days
(0 Reviews)
0.0