Find Jobs
Hire Freelancers

SIMULATION USING ANSYS & FLUENT

RM825-2475 MYR

Closed
Posted about 6 years ago

RM825-2475 MYR

Paid on delivery
Simulation for below requirements: 1. single heater without fan-transient analysis: voltage given (need to know the current, power and resistance) 2. single heater with fan -fluent (air)--transient analysis: voltage given (need to know the current, power and resistance) 3. 5 series heaters without fan (transient)- voltage given (need to know the current, power and resistance) 4. 5 parallel heaters without fan (transient)- voltage given (need to know the current, power and resistance) 5. 5 single heaters with fan- fluent (air)--transient voltage given (need to know the current, power and resistance) 6. 5 parallel heaters with fan- fluent (air)-voltage given same time (transient) 7. 5 parallel heaters with switching-time delay (transient) without fluent 8. 5 parallel heaters with switching-time delay (transient) fluent *** Time is for a duration of 10 minutes and temperature reading is needed for every 1 minute
Project ID: 16057607

About the project

19 proposals
Remote project
Active 6 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
19 freelancers are bidding on average RM1,909 MYR for this job
User Avatar
Hello, Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, design analysis. I am a standard member here and a full time freelancer, so you can contact me anytime. to brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & Solidworks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like solidworks, CATIA, ANSYS, 3DMax, Creo MATLAB etc. As i have engineering background with six years of industrial experience and very confident about any project related to mechanical engineering field. I have preferred freelancer badge, you can see next to my profile name. You can check my profile and portfolio:- https://www.freelancer.com/u/ashrafshekh.html My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards Ashraf Shaikh
RM2,444 MYR in 10 days
4.9 (78 reviews)
7.1
7.1
User Avatar
Hello sir, please send me the image or cad file i will have look and also check quality of cad model. i have read the project details and skill set requirement, my skill is matching to your requirement. i have 18 years of experience in Product design, mould flow analysis, FEA (Ansys and Hyper works) and mould design. My expertise is -Product design -Plastic mold design -FEA, -Mould flow analysis. -3d printing -CFD -CNC programming i have strong skill in CAD Model/CAE/Solid works,Mould flow/Anyss and Hyper works. looking forward your reply. Thanks uday
RM2,722 MYR in 10 days
4.7 (67 reviews)
6.9
6.9
User Avatar
good at analysis and well can do a good design and even come up with the explanations towards the same
RM2,000 MYR in 10 days
4.8 (91 reviews)
5.9
5.9
User Avatar
Professional simulation and development experience Relevant Skills and Experience Pls attach full details
RM2,000 MYR in 25 days
4.4 (142 reviews)
6.5
6.5
User Avatar
Hello, Greetings for the day, I can do flent CFD in ANSYS, I read the description, I can do this task, please come in chat to discuss details. I have 7 years of experience in CAD/CAM/CAE. Please visit my profile to see my past work and reviews. I have expertise in Solidworks, CATIA, ANSYS, CREO, Abaqus and MATLAB. Looking forward to hear from you soon. Feel Free to contact me. Thanks & Regards, Irfan Shekh
RM1,833 MYR in 10 days
4.6 (39 reviews)
6.0
6.0
User Avatar
Hello, iteresting project for me. Please look my past work and rusume. I would like to know more about 3d model.
RM1,333 MYR in 4 days
4.9 (19 reviews)
4.9
4.9
User Avatar
Hello, I have a background in mechanical and chemical engineering with a Ph.D. degree from a Canadian University. I can help you in your project as I have done many CFD/FEA projects using ANSYS, Fluent, CFX, SolidWorks, Comsol, Autodesk. Here are some examples: - Simulated turbulent flows (k-e, LES) in various geometries (2D,3D) - Simulated natural convection flow in a solar tower and chimneys - Simulated forced convection in solar heater - Simulated thermal comfort in a car with sun radiation - Simulated ICE engine piston motions in Fluent - Simulated bubbly flow, slurry flow, and slug flow in pipes and constrictions - Optimized the design of a compressor blade for maximum efficiency - Simulated VAWT using dynamic mesh in Fluent - Optimization of catalyst ratio in a dual reaction PBR using GA and PSO optimization methods Also, my Ph.D. thesis was about the design and optimization of a device to produce cavitation in pumps, venturi, and orifice. I am available 24/7 and can start your project as soon as possible. If interested please contact me to talk in more detail about the project and define our milestones. I Look forward to hearing from you. Regards Shaham
RM825 MYR in 7 days
4.8 (17 reviews)
4.9
4.9
User Avatar
Master in Engineering, Electrical and Electronic Engineering undergraduate student, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
RM1,833 MYR in 1 day
4.7 (13 reviews)
4.4
4.4
User Avatar
HI with the 10th year of experience working with ansys in mechanical design and development department. Worked in 5 different industry completed more than 60 project .
RM1,833 MYR in 10 days
4.9 (11 reviews)
4.2
4.2
User Avatar
Let’s chat and discuss about price and work. 12 years experience in same filed you will get 100% correct work. No need to pay upfront money first check work quality and if you satisfied then pay.
RM1,833 MYR in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
RM1,833 MYR in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
i like the all control system and automation in general and i have expirnce 4 years in my father company
RM1,833 MYR in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, Greetings for the day, I am expertise in fluent CFD in ANSYS, I read the description, I can do this task. I have 4+ years of experience in CAD/CAM/CAE.
RM2,000 MYR in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
We have more than 22 years of experience and has been executing CAE(Structural Simulations) , CFD Simulations projects and product development projects, with higher complexities and unique challenges, both in terms of geometry & function. We believe that we are in the business of providing competitive edge to our customers, hence our laser-focus on quality and time. We charge $ 15-20 /hr. for our services. Our cost to services will save your money and time.
RM2,444 MYR in 10 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of SINGAPORE
Singapore
0.0
0
Member since Jan 12, 2018

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.