Need an Expert for a Project (Xilinx FPGA, Vivado, VHDL) -- 2

Completed Posted 4 years ago Paid on delivery
Completed Paid on delivery

Expert must be experienced and familiar with Xilinx FPGA, Vivado, VHDL very well. 

Below are the basic requirements are given. Any query/question is highly welcome. 

Project Descriptions:  

Long term full speed memory test for Xilinx FPGA DDR4@1200Mhz in VHDL. 

Delivery on the KCU105 platform.

Memory test designed to run for several days gathering memory errors statistics stress-testing the RAM at maximum possible speed.

It will use Xilinx MIG as a memory controller. Using AXI or MIG interface for the test.

Results access through AXI-Lite connected to Microblaze.

The algorithm for memory testing will be : (Moving inversions, random pattern) based on memtest86 specification.

The configuration will include: memory size

Statistics will include: number of full memory runs, the progress of single run, table of errors (128 rows, error ID, error address, wrong data, correct data)

Important Note:

Project is not that complicated and it can be basically assembled from some available parts so it's not that hard for someone who knows. And it won't take much time.

It will be for our internal testing so if you use some 3rd party IPs, should be no problem.

If there is some request about payed Xilinx IP cores, please let us know, we have access to most of them. Maybe we will be able to provide them for free.

If you already don't have KCU105 board I think it would be also possible, you can do it on other board or in simulation.

We really need a simple solution, we can also build up a great project on this, but we are looking on simple memory test read/write/compare.

There are already lots of free cores around and we can provide more if needed. If the developer already has something or some components even better.

If you choose to use AXI4, there is a lot of modules for AXI4 read and write so the actual control module would be quite simple, so it would be more about assemblink it together and put some simple control to it.  

If you can do this, in your BID proposal please let me know:

1. How much time/deadline you need for this?

2. How much price you'll charge for this?

3. Please share a proposed execution plan/steps you'll follow to execute it.

Electronics Embedded Systems FPGA Microcontroller Verilog / VHDL

Project ID: #24026391

About the project

11 proposals Remote project Active 4 years ago

Awarded to:

hungfreelancer

Hello, I have just got your invitation to bid on this project. I am working in the ASIC design flow for 10 years. I have experience in using VCS, modelsim, vivado FOR SIMULATION, DC for synthesis and ICC for layout. I More

$250 USD in 5 days
(5 Reviews)
3.9

11 freelancers are bidding on average $762 for this job

ahmedmohamed85

Dear Sir I have more than 10 years experience in digital design using Xilinx and microblaze please message me so that we can discuss Best regards

$833 USD in 7 days
(415 Reviews)
7.8
Fpgageek

Hi I have been working on Verilog-VHDL and Xilinx and Altera FPGAs by more than 6 years. I have seen your requirements but I need some more information to give a quote. Please let me know if the requirement is still More

$250 USD in 15 days
(21 Reviews)
5.4
Manoj3050

Hello, Thank you for your project posted. I am an FPGA engineer with more than 5 years of experience in FPGA based system designing. I have worked for industry leding EDA company for more than 4 years and I have oth More

$600 USD in 20 days
(23 Reviews)
4.8
beandigital

Hello I can do this for you but I dont have the KCU105 board. But I do have some other boards so I could test the Microblaze code on one of those. Regards Jon

$1500 USD in 10 days
(4 Reviews)
4.5
majidabdi

I am an EE engineer. I have lots of experience designing circuitry in both digital and analog circuits and in programming field worked with Xilinx and Altera FPGA boards writing VHDL and embedded C for NIOS II (field More

$250 USD in 7 days
(12 Reviews)
4.0
rizwanmpec

Hi I have experience of doing similar work I can do this type of job. Please share the docs, files of the projects.

$500 USD in 7 days
(8 Reviews)
3.6
shaitobikon

Hello, I'm an FPGA expert designer with more then 10 years of experience in VHDL. I also have around ~3 years of experience working with this specific Ultrascale board and using its DDR4 memory (especially for high More

$2300 USD in 35 days
(6 Reviews)
3.2
arunaupul

Hi, I have experience working with dynamic memories using zynq706. I also have expertise in memory systems since i have been conducting lectures for university students. I also have a kcu105. Relevant Skills and Exper More

$777 USD in 15 days
(1 Review)
2.4
rimensl

There is a tested complete solution for writing AXI4-Stream data to AXI4 memory mapped interfaces with configuration via the AXI4-Lite interface (Address, SoftSize, HardSize and etc). There are various debug boards and More

$600 USD in 5 days
(0 Reviews)
0.0
aliasim129

m an expert fpga programmer. currently i m doing my masters in control systems. m using fpga zynq 7000 SoC type chip for my projects.

$520 USD in 10 days
(0 Reviews)
0.0