Hi all,
We are looking to integrate an LCD display in our upcoming remote control. The micro-controller we are using is Arduino Nano V3. This is more like a consulting work/project.
We have found 2 LCD displays and 1 OLED display that we can use:
- 2.6" 480x320 LCD display with SPI interface (R61531 driver) - this is the ideal one
- 2.6" 320x240 TFT LCD ILI9342 / ILI9341, 8 16-bit 3-wire 4-wire SPI serial port
- 2.42" 128x64 OLED LCD module
The goal is to integrate the first one, if not, the second one, and ultimately, the OLED.
We need help into connecting one of this displays to Arduino and make it work.
I can offer more details and datasheets over private message.
Thank you all!
Marius
Before awarding to anyone, give me a chance to discuss it with you. I am embedded system electronics engineer with 3 years of experience in iot development. I have expertise in development board Arduino, ESP8266, Raspberry Pi, etc and the microcontroller ARM, Microchip, stm32f, etc. I can design and develop PCB. I have hands on experience in mobile app development that communicates with electronic hardware.
I have worked on home automation, beacon based indoor positioning system, smart parking system with real parking spots update on mobile app, etc. Another iot product I worked on was women saftety device, on which, if women press the button, her location is shared with her family members and it starts recording audio to a cloud server automatically, while at the same time it calls nearest police station automatically.
Please consider sending me a message so that we can discuss this further
Hello,
I am Anthony from Sri lanka. I have 7 years of experience in the filed and I am very much interested in your project.
To be honest I dont have any experience with the first display you have mentioned. R61531. But the other two I have done it before and also have hardware with me. So we can test the code before sending it to you. If you like,we would love to demonstrate the working of two displays even before awarding the project.
Why you should hire me ?
* As a full time freelancer I have my own PCB fabrication work shop and testing lab. So there is no problem doing live tests with you after the device has been developed.
* My workshop is equipped with CNC machine, FDM 3D printer and DLP 3D printer. So there is no problem designing and printing plastic parts you required.
Please contact me if you are interested. Thank you
Anthony
Hello I am an Electrical Engineer did MS in Electrical Engineering (Control System) as well. I have 4 years of Experience as well, also have 11 IEEE conference publications and 3 Journals with good impact factor.
My major Expertise are:
- MATLAB, SIMULINK modelling and simulation in Electrical and Electronics Engineering.
- AutoCAD, Multisim, Arduino, Eagle, Proteus, C/C++, Circuit designing, Engineering Mathematics and other Electrical Engineering subjects.
- PCB Designing and prototyping
- Plagiarism removal, Research paper writing, Academic writing, Technical Writing.
- VHDL/Verilog HDL, Xilinx, and FPGA.
- Data Entry, Ms. Office, PDF conversion, pdf editing, copy typing etc.
will provide
- Professional solution
- 100 % Satisfaction
- In time and Budget
- Professional Agreements
- Can ship products in low cost
- 100% refund on unsatisfactory work
- All needed files
Kindly check my portfolio and inbox me to discuss it further.
Have best knowledge on Arduino UNO/MEGA to build any kind of digital device. To building remote control system hire me to move this project successful. I can integrate any of LCD module by using it's data sheet. Have more than 15 years of experience on Computer Language and Digital Electronics.
Hello.
I am electronics design engineer and have experience with Arduino Based porjects. I would like to help you with. All these displays require lot of RAM and Arduino Nano might not be able to what you require. If you could share the data you want to display or what sort of screens you have in your mind I might be able to help you with this.
Thanks
Hi Marius.
I'm programmer/electronic hardware developer with experience over 20 years. I know arduino platform very well and I think that I can help you to connect LCD to Arduino.
Regards, Alex.
yes buddy,,,how r u,,,,i interfaced every sort of lcd with arduino,,,u will get the best work accompanied with brotherhood,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Salut ,
Am facut multe ciudatenii cu microcontrolere si LCD uri , asta e deja una mai simpla .
toate LCD urile se pot integra in arduino , doar ca trebui mare atentie la cod , ca umpte toata memoria .
se poate face cod ul , destul de repede , dar cu mare atentie al grafica , sa nu incarce memoria.
cu stima,
Andrei
hi...
may i suggest stm32f103c8 board instant of nano...
then we can simply interface minimum ILI9342 and we can do the coding in Arduino IDE too..
or another option is OLED with nano..
if you need i can make PCB for your board in KIcad(with or without developer Board)
please mention your exact need....
Hello,
I am an electromechanical and electronic technician, and I only have the thesis to be an electronic engineer.
I work in an electrical testing laboratory, under international standards, im work here for more than a year ago.
I have experience in design.
If you want to know something else, do not hesitate to contact me
I think it could be of great help for your project.
I am already at your disposal.
regards
Hello!
After reading your description, I interested to work with your project.
I have hardware for testing project.
And I have enough experience to make this project
Look forward to your answer.
Best regards.
hello I am aan electronic engineer and I have a good experiance with arduino projects, this project realy interset me and I am ready to help you , don't hesitate to contact me
I am professional Embedded Systems Engineer with more then 4.5 years of industry experience.
I have worked on various Embedded Computing Platforms like Arduino, Raspberry Pi, Beagle Bone Black etc.
I have also worked on various microconrollers like the ST32 Family, AVR, PIC etc.
I have the necessary skills to consult for this project.
Looking forward to discuss this further.
Regards,
Rishabh
I will read the data sheets for the controller and provide you with suggestions on how to connect your display. Once you approve, I will wire the display and provide you a test demo video.
Relevant Skills and Experience
I have the Arduino hardware on hand for testing. I should have the display as well.
After this project, I will be available for any follow-up work.
This project gets my interest because of Arduino. Send me the details and i will actively guide you on this. I have experience with Arduino projects. Looking forward to work with you.