Build a PIC Program in XC8

So this project is only for some very serious Embeded system developers it involves programing of a PIC micro controller specifically PIC16f505 in C language prefered however can also be done in ASM but C would be preferred. Attached here is a picture of wiring diagram for the PIC16f505. the process is to be followed according to the circuit is:- 1): Once the device is turned on the LED_1 is on for 5 seconds then off-> LED_2 for 15 seconds then off->LED_3 ON permanent with two buzzer beeps -> 2 seconds later Machine Indicator LED is to be turned ON. with a Music being played on the buzzer. 2):Sn1 Switch is always HIGH as it is a sensor reading once it is low the Machine indicator LED is turned OFF and LED_2 blinks with Buzzer sound(indicating Error). 3):SW1 turns on the Machine Indicator LED or turns it OFF . i.e it is a manual toggle to turn the Machine on/off. 4):SW2 is music mute/unmute. the notes to be played fo the music on buzzer are as: int melody[] = { C, b, g, C, b, e, R, C, c, g, a, C }; int duration[] = { 16, 16, 16, 8, 8, 16, 32, 16, 16, 16, 8, 8 }; frequencies of notes are:- #define c 3830 // 261 Hz #define d 3400 // 294 Hz #define e 3038 // 329 Hz #define f 2864 // 349 Hz #define g 2550 // 392 Hz #define a 2272 // 440 Hz #define b 2028 // 493 Hz #define C 1912 // 523 Hz // Define a special note, 'R', to represent a rest #define R 0