Build an ALU with testbench. Compile in Quartus to get size and timing information. Simulate in ModelSim
This project was awarded to
I cannot say enough positive feedback on professionalism and patience and willing to actually deliver what I required. The project was done well before the estimated time any delay was on me and still Ahmed was helpful and understanding. I would definitely offer any future projects and I recommend you do the same. It will be completed to specs and done on time. That alone is priceless. Thank you again
8 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 8 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000
Looking to make some money?
- Set your budget and the time frame
- Outline your proposal
- Get paid for your work
Bids on this Project
[July 2014 to present] Digital design engineer at Varkon Semiconductors from. Verilog and VHDL implementation of various digital blocks in the physical layer of different communication standards and customized transceivers with the following responsibilities: Understand the standard and system model of the blocks required to be implemented. Analyze the block and find a suitable architecture for the design. RTL coding using Verilog or VHDL with functional simulation for the designed block. FPGA synthesis, static timing analysis and optimization. Gate level simulation. [October 2011 to January 2014] Digital Design Engineer at SilMinds: Design and Implement interfaces for different decimal floating-point arithmetic cores on XilinxVirtex 5 FPGA using Verilog. Integrate and validate SilMinds decimal floating-point Coprocessor with SilMinds APIs on Xilinx Building the required software using C programming language for verifying the performance of the decimal floating-point arithmetic cores.
Ho Chi Minh, Vietnam
I have learned in HCM university of technology, I am an logic design engineer. I am working in Arrive Technologies Viet Nam three years. Through my courses at university and my company, I able to work on digital ASIC, FPGA design, knowledge of network and data communication (Carrier ethernet)
Ragama, Sri Lanka
I am an electrical and electronic engineering student who has completed the Second year and currently engaged in the work of third year which and on internship . I have a lot of experience in C/C++ programming. I also have special skill in working with assembly, mikroC and Arduino which are mostly used for robotics. I also have the skills to design electronic circuits and debug them in order. I am a CSS Designer looking forward to being hired and placed by you in any of your upcoming projects. I have many years of experience working under different employers and have proved them the best to my capacity. I have good proficiency in the areas of CSS and Data Entry. I also have good experience working with HTML and Internet Marketing. I can take up any given work with dedication and prove to put in my best to benefit you. I am compatible to work as a cross team or as a team as the case may be.
Completed my masters in electronics..wide knowledge on electronics design, C, C++, Embedded C, MatLab, EDA tools, Python, VHDL, Verilog, Altera DE0 nano board, Modelsim, LabVIEW, FPGA
I had more than three years of industrial experience in the field of FPGAs and Embedded Systems Design. --- Languages: Verilog/VHDL, systemVerilog, C/C++ --- Tools: Synopsys, ModelSim, Xilinx Vivado, ISE, EDK, SystemGenerator, PlanAhead, Quartus II, Eclipse C/C++ --- PCB layout --- OS: Linux, Windows --- Others: Physics (always love it) Contact me if you need those services. Thank you for your spending time to view my profile.
I am an Enineering Student have a good knowledge in Arduino PCB FPGA Matlab Image processing Studying Electronics and Telecommunication Engineering in University of Moratuwa Sri Lanka And Currently doing my 6 months Internship in NTU Singapore on a research project about Sensor Array.
I am an engineer by profession. I am tech savvy. Writing is my passion. I believe that I could do a great job as the lead for the project. As you can see from my resume I have extensive experience in content writing, as well as article writing etc. My forte is making sure that the whole project is moving along every day. Coordinating all aspects of the project. I have been working with the same company all my life. I have put into their organization many excellent systems, and they have been set on autopilot to grow steadily. Through my dedicated efforts and, and being a team player, with special emphasis on budgeting, profit and cash flow analysis I was very instrumental in growing the corporation. I wrote, researched, proofread and edited the College Newspaper for 5 years. I am now looking for new challenges in my life. I would like to direct and focus my dedication, skills, initiatives, experience, flexibility, and energy helping your company. I believe I would be a tremendous asset to your company. My philosophy in life is to be a giver, and by giving of yourself to the company you will achieve personal and work related success. I have found that this has been my motto in life, and I have found that it is true and it has brought me over the years much satisfaction.
8 Years Experience in digital system design using VHDL/Verilog for FPGA's and CPLD's in Xilinx Family boards and Custom ASIC Boards. Specialties SystemVerilog, SystemC, VERILOG and VHDL, TCL/TK scripting, PERL Scripting. Synopsys Design Compiler, IC Compiler, VCS. Xilinx ISE , Vivado, Xilinx Chipscope Pro. Cadence Virtuoso, NC-Verilog, Simvision, SoC Encounter Mentor Graphics ModelSim 10, Questa Sim, Calibre Design REV, DRC, LVS, PEX.
I am an Electrical Engineer with multiple Engineering, Mathematical, programming and data entry skills. I am really strong in verilog coding, c++ coding, mathematical problem solving and digital design. Apart from this I have been worked as Assistant and have experience about doing the job honestly and timely.
I have great skills in the areas of Electronic Forms and Electronics due to my past experience working as a Electronic Forms Form Filler and Electronics Scientist. I am looking to be outsourced by you for your jobs so I can bring my skills and experience to you. I am also highly proficient in Embedded Software. If given a chance to be part of your team I will work best and bring in the required output.