Anti-Theft device with GPS, GPRS and tilt sensor/accelerometer for wake up.
€750-1500 EUR
Paid on delivery
I need to create a Anti-Theft device with GPS, GPRS and tilt sensor / accelerometer for the ignition of the device.
Something like this
[login to view URL]:g:5L0AAOSwlaxWOCSn
in short words:
The device should be turned off until it is shaken .
I think a good solution is to use a tilt sensor that wake up the card but other solutions are fine .
Once you turn must send the GPS position to the server via GPRS module.
The maximum width for the pcb is 3 cm x 20 cm .
Requirement:
- Small as Possibile
- better if the width is less than 3 cm
- standby mode time: min 8 month
- working time: >24h
- Powered by 3 AA or 3 AAA battery.
- gprs work with trib-band 900/1800/1900 o quad-band 850/900/1800/1900
- cost of production for 1000 pcs <50 $ for item
- motion detection by tilt sensor or acelerometer
*Important: Need to build 3 working prototypes
Must provide all development files to manufacture, the source code of the firmware and the documentation.
BEEBEEP write to confirm you have read everything
Project ID: #11206817
About the project
19 freelancers are bidding on average €1305 for this job
BEEBEEP Hi sir I am an expert electronics product developer please have a look at my profile I have seen the requirements and I am sure we can deliver you best Please get in touch to discuss it further Waiting fo More
Greetings, I have good expertise with uC, Arduino, GPS, GPRS, sensors (Acc, Gyro, Mag, Baro) and embedded systems in general. Please see my profile for details. I think I can assist you here. However since you More
Hello, I am Anthony. I am working FULL TIME as freelancer. I have double degrees in Mechatronics and Applied Science fields. I have very good feedbacks on freelancer.com . Please check the lin More
I am an electronic engineer with more than 10 years of experience. I have worked on similar products before. i can do it with per device cost less than 50 around 35 to 40. i can also reduce the size to less than 20cm. More
Hello Dear, We are a team of experts with a cumulative experience of more than 50 years in the field of embedded systems, electronics, prototype development and production. Our experts have years of experience More
Dear Customer I have read your project specific requirement for anti-theft device with GPS, GPRS and tilt sensor/accelerometer for wake up. Our Skills:- Embedded System:- Microcontrollers/Development Platforms A More
BEEBEEP Hi, I have worked on a similar project but the size was 5cm x 5cm using simcom sim900a + ublox neo 6m . I will be able to make the pcb within 3cm x 10cm and also add mosfets to cut the power to gps and gprs More
BeeBeep Dear Sir/Madam, I have already design device like that For your needs I need to revise my design. I could start immediately and I could send you prototypes. Thanks
I have designed multiple technologies in the past to text the location of a device when an input is triggered. I also have experience in PCB design.
Hello... My name is Carlos... I am a Computer Science Engineer with extensive experience in digital electronics (Microchip PICs, Arduino, ATMEL microcontrolers, sensors, GPS, Actuators and specially in RC-gear like mod More