Find Jobs
Hire Freelancers

Build Arduino Based LED driver controller that is triggered by a 3 volt electrical current

$25-50 USD / hour

Closed
Posted almost 8 years ago

$25-50 USD / hour

We want to create a LED display based on Nichia NCSB219B-V1 blue leds and Nichia NCSR219B-V1 red leds that are set on a circuit board that have animated sequences according to the state of device (on / off 3 volts) that is connected to. The arduino animates the led lights when the trigger is on or off.
Project ID: 10748375

About the project

34 proposals
Remote project
Active 8 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
34 freelancers are bidding on average $31 USD/hour for this job
User Avatar
Hi Sir I am an expert electronics engineer with almost 7 years of experience in design and development of different circuit and embedded systems. Please have a look at my profile to see the reviews of my previous employers. Please get in touch to discuss it further I am waiting for your reply to start Regards
$26 USD in 15 days
4.8 (226 reviews)
7.9
7.9
User Avatar
hi i am an electrical engineer. i have vast experience related to micro controller and its programming. i have done many embedded system projects. i have hardware experience regarding Arduino. let me know if you are interested. we can discuss further on chat
$25 USD in 20 days
4.9 (33 reviews)
6.4
6.4
User Avatar
Hi, I am a post graduate power electronics engineer and having very good industrial experience of 8+ years in R&D and project development. I am excellent high frequency transformers design, circuits design, Regulated power supplies design with universal input to DC output, SMPS, LED drivers, DC-DC, AC-DC converters design, PFC interleaved boost converter, Battery management system, Battery chargers, UPS design, sine wave Inverters, solar grid tie inverters, Solar battery chargers and street light systems design from few watts to KW range using Buck, Boost, and Buck –boost, Interleaved boost/buck, Fly back Push Pull and H-bridge inverters. I have work experience to design from few watts to KW range meeting all compliances like EMI/EMC and safety standards UL etc.
$27 USD in 10 days
4.8 (51 reviews)
6.6
6.6
User Avatar
Hi, I am an experienced engineer that specializes in new product design and development. I have previously worked with Arduino boards and have designed many LED circuits. I can design the LED circuit for you. I will deliver *Circuit Schematic *PCB Layout *PCB Fabrication files *BOM w/vendors I can complete the design within one week and my fee will be $500.00. The suggested payment plan is 50% ($250.00) initial and 50% ($250.00) final. I am able to get started immediately and hope to be able to work with you on this project. Sincerely, Michael Cooke, PhD, EIT IHS Consultations
$55 USD in 10 days
4.9 (7 reviews)
6.2
6.2
User Avatar
Hello, I am Anthony. I am working FULL TIME as freelancer. I have double degrees in Mechatronics and Applied Science fields. I have very good feedbacks on freelancer.com . Please check the link at the end and review my feedbacks. So you can get an idea of my work. I have the capability to guide you until the manufacturing stage. I have many contacts in China and can help you to setup there if you are gonna mass produce your product. https://www.freelancer.com/u/Anthony989.html Thank you Anthony
$41 USD in 10 days
4.8 (59 reviews)
6.5
6.5
User Avatar
Hello. Im designing different electronics devices, mostly based on avr, arm MCUs and boards with them like arduino, stm-discovery etc. I can help you with your deal and since im new one here I can do it cheaper then anybody. (autopromotion^)) Give more info and lets talk.
$25 USD in 10 days
4.9 (64 reviews)
6.1
6.1
User Avatar
Dear Hiring Manager, I'm a professional electrical engineer with high expertise in 1- Circuit Design (Electrical, Electronics, DC/DC converters, DC/AC inverters etc.) 2- PV-system design (both grid connected and off-grid systems) 3- Software simulation (Matlab, Proteus, Orcad, Logisim) 4- PCB tools (Proteus, Eagle, Altium etc.) 5- Microcontrollers and modules (PIC/ATMEL, Arduino boards, Raspberry Pi, Zigbee, bluetooth/wifi modules, GSM modules). 6- Programming languages (C/C++, Java, Objective-C, Swift) 7- Professional report writing (charge $10/100 words) EXTRAS: 1- Regular updates regarding the progress. 2- Constant communication 3- 110% satisfaction guarantee In fact you will love to work with me that all your future projects will come to me. Just try me, and have the wonderful experience. Regards. Faraz Ahmad
$26 USD in 10 days
4.9 (30 reviews)
5.4
5.4
User Avatar
Hi, I have experience in Arduino developing - software and hardware. I can do your project. Slavi.
$40 USD in 10 days
5.0 (18 reviews)
5.4
5.4
User Avatar
Hi! I have some experience working with Arduino and also with other stand alone, MCU based LED drivers. For more details, contact me, please. Wish You nice Day.
$25 USD in 10 days
5.0 (15 reviews)
5.1
5.1
User Avatar
Hi, I have 16 years of design and development experience in the field of Embedded systems, I am confident that I can do your project. About my self you can see my profile and my clients reviews. Regards.
$41 USD in 10 days
4.9 (11 reviews)
5.3
5.3
User Avatar
Code to control led from Arduino is no problem, any scene you want can be implement. I also support to design high power led driver if you need.
$25 USD in 30 days
4.8 (25 reviews)
5.1
5.1
User Avatar
A proposal has not yet been provided
$44 USD in 5 days
4.8 (15 reviews)
4.7
4.7
User Avatar
Thank you for reading this proposal . I'am an Electrical Engineer with specialization in Electronics Embedded Department . Currently I'am working for Atom Developers as a chief design engineer for embedded systems and have experience of over two years in delivering clients top notch embedded systems which cover MCUs , sensor interfacing , GSM modem interfacing , serial COMM , Labview interface and many other latest technologies. These projects have broad features apart from their primary functioning. For example they include GSM Model for RF communication and Serial Communication interface with LabView and Matlab to provide feedback operations and improve the product . My line of work mainly follows a typical routine . Design of Circuit Schematics , then comes the Algorithm development and PCB design and Simulation. You can further review my profile and let me know what you think Looking forward to your response. Best Regards TaimoorAli Electronics Engineer
$31 USD in 10 days
4.7 (9 reviews)
3.8
3.8
User Avatar
Hello! I would like to help you with this project. I do have experience working with Arduino. If you need my help please let me know. Thank you, Claudiu
$27 USD in 10 days
5.0 (3 reviews)
3.6
3.6
User Avatar
i am Assistant Technical manager of Sublime Enterprise . I have 5 year experience to work on hardware design , software design etc. , I also design lots of industrial product . Design Pakistan's 1st RFID debit card system for amusement Parks. i can complete your project as you want...
$40 USD in 10 days
5.0 (3 reviews)
3.2
3.2
User Avatar
See my profile description for my qualifications and experience. I have done lot of similar projects before. So I can assure you the best output.
$27 USD in 10 days
5.0 (5 reviews)
2.8
2.8
User Avatar
Hello, My Skills and experience details as under which are relevant to the project: Expert level skills in embedded software programming and embedded hardware interfacing with many years of experience, worked on C programming with use of macros to handle different variants, on different platforms of projects, knowledge of 8,16,32 bit micro controllers, firmware development, interfacing of LED, LCD, EEprom, Sensors, ADC, PWM output, HMI development techniques, memory management using SPI, I2C, UART and other peripherals, worked on PIC, NXP, Freescale, TI ARM micro controllers, Tools like MPLAB, Metroweks Code Warrior, Code Composer and Arduino projects Contact back to discuss further. Thanks !
$25 USD in 10 days
5.0 (2 reviews)
2.4
2.4
User Avatar
i have a good knowledge about arduino programming and have done number of projects using arduino board.i am also working with number of modules and sensors.i also have good knowledge about its hardware for interfacing with micrcontroller.I will do your work easily and accurately
$25 USD in 10 days
5.0 (2 reviews)
1.3
1.3
User Avatar
A proposal has not yet been provided
$33 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear sir/madam, I am placing my bid to the lowest amount is because i have already completed this project in my senior year and would be really happy to work in it for you. So i have done all the necessary research and I am waiting for your signal to just dive into it. Sincerely, Ayush Bhandari
$25 USD in 10 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of GERMANY
Berlin, Germany
5.0
73
Payment method verified
Member since Nov 16, 2010

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.