Solidworks Jobs

I have a single-body Fusion 360 model that needs to be separated into two mating parts, then equipped with a male/female push-fit joint designed for secure fitting. The joint must lock firmly without tools while still letting me pull the parts apart for maintenance. Because this file goes straight to manufacturing as the final product, tolerances, wall thickness, and draft angles all have to be production-ready. Scope of work • Split the existing body at the most logical plane, preserving overall geometry and strength. • Design a keyed male/female push-fit interface that resists wobble and guarantees repeatable alignment. • Optimise clearances for typical FDM and SLA printers (I will confirm nozzle size and layer height once we start). • Return the updated Fusi...

I am developing a lightweight detachable bicycle canopy designed for daily commuting in rainy weather. The goal is to create a compact aerodynamic canopy structure that can be quickly mounted on a bicycle and folded for easy storage. The canopy should be designed as a skeletal structural system (no fabric modeling required). The design must be created in Autodesk Fusion 360 as a parametric assembly with proper joints and mechanical relationships.

I’m developing an IoT device that will live permanently outdoors, so the enclosure must be tough st and attractive. The product needs to be C1D2 certified. I have sketched the basic board layout and I now need a mechanical engineer who can carry the housing from an initial requirements definition all the way through to documentation for mass production. Durability drives every decision: weather-proof seals, UV-stable plastic (I’m leaning toward a robust polycarbonate or glass-filled nylon), impact resistance, and the ability to maintain watertight integrity after repeated assembly cycles. If you feel a metal insert or composite gasket improves reliability, I’m open to those suggestions, but the core body should remain plastic to keep tooling costs and weight down. The w...

I need a seasoned Mastercam programmer to prepare reliable, shop-ready toolpaths for a steel production run. The models are already complete; what I’m missing is an efficient, collision-free machining strategy that maximises tool life and keeps cycle times tight. Your job is to: • import my 3D files, • create roughing, semi-finish and finish operations suited to steel, • select appropriate cutters and holders, • verify everything with dynamic simulation, and • deliver the final .MCAM file along with a setup sheet and post-processed G-code for a Haas VF series mill. I’ll provide the solid model, fixture layout and any in-house tooling constraints the moment we start. Once the first part passes inspection, the same program will run a short pro...

I have an early concept for a multi-purpose woodturning tool and I need someone to turn that idea into a build-ready prototype. At this stage it is nothing more than sketches and functional notes, so your primary task is to translate the concept into detailed 3D CAD and engineering drawings I can hand straight to a machinist. Core functions • Cutting and shaping • Detailing and finishing • Hollowing out The finished design must handle both hardwoods and softwoods without swapping cutters mid-project, so balance, vibration control and edge durability are critical. I am open to carbide inserts, HSS, or a hybrid tip system if it meets those goals. Deliverables 1. Parametric 3D model (SolidWorks, Fusion 360 or similar) 2. Fully dimensioned drawings with tolerances...

Job Description We are looking for an experienced CAD Garment Pattern Designer to create accurate digital garment patterns for our clothing brand. The designer must be skilled in creating production-ready patterns and grading them into multiple sizes. Responsibilities • Create CAD garment patterns based on reference images, tech packs, or sample garments • Develop clean, production-ready patterns suitable for manufacturing • Grade patterns into multiple sizes (XXS – 5XL or as required) • Ensure proper measurements, seam allowances, and notches are included • Deliver final files in CDR, DXF, or other editable CAD formats • Make revisions if needed based on fitting feedback Requirements • Proven experience in garment pattern making using CAD...

As makers of bespoke sofas, I would like a set of clear, production-ready technical drawings for our custom-built sofas. The idea being is to create a document that both our clients and our upholstery team can read at a glance. Scope Ideally, each sofa model needs three orthographic views—top, side and front either on the same or on a single sheet. Every view must be dimensioned precisely so a carpenter can cut frames without guessing, yet still look clean enough to share with clients during approvals. Content to show • Accurate overall measurements and critical internal dimensions (seat height, arm thickness, back angle, etc.). Step-by-step assembly notes or fabric information is not required at this stage; the focus is on dimensions and clarity. Format A vector-based tec...

I need an experienced Amada laser programmer who can quickly turn my part drawings into production-ready code for cutting metal in the ¼"–½" range. The role is remote and focused on creating nests using Amada's software. All work is for steel and stainless only—no plastics or wood—so your settings, pierce routines, and kerf offsets must reflect that. Parts arrive as DXF/SolidWorks files and are already dimension-checked; what I’m missing is the clean, efficiently nested NC program that will let my operators load it straight onto the machine and start cutting. I’m on a tight timeline and would like the first set of programs ASAP, ideally within the next day or two, with a short feedback loop for any tweaks. Deliverables • A...

I need a complete structural evaluation carried out in ANSYS Workbench for a mechanical component that is already modeled. The task is strictly structural—no thermal or fluid-flow coupling—so please focus on static strength, deformation, and, if you judge it helpful, a brief modal check for natural frequencies. This is a single part, not a building, bridge, or aerospace assembly. You will receive: • the clean STEP file of the component • loading diagrams with magnitudes, directions, and boundary conditions Your job: • import and clean the geometry, create a high-quality mesh, and document your mesh-independence check • apply the supplied loads and constraints, then solve for von Mises stress, principal stresses, displacements, and safety factor ...

I’m developing an automatic helmet-cleaning kiosk and now need a professionally engineered sheet-metal enclosure for it. The job centres on translating my overall size constraints, component mounting points, and access requirements into a manufacturable design that can be laser-cut, bent, and assembled in low-volume production. I’ll share a rough layout, internal component models, and aesthetic references as soon as we start. From there, I need you to: • Build a complete 3D CAD model of the enclosure (SolidWorks, Inventor, or a neutral STEP file are all fine). • Produce flat-pattern drawings with bend lines, hole call-outs, and material specs ready for sheet-metal fabrication. • Generate an itemised BOM listing fasteners, hinges, gaskets, and any off-the-sh...

Looking for free lancer who can make 3d conversion and fabrication drawings with tag drawings of metal panels. the scope includes around 80 different assemblies. software to be used inventor,autocad ,msexcel to deliver 3d inventor model and fabrication drawings

I have four fully-dimensioned 2D drawings for a ship stem—one assembled view and three individual components—and I need them reproduced in SolidWorks and delivered as .stp files. Every small feature shown on the drawings must be modelled, not just the basic outline; the final geometry should match the provided dimensions exactly. Deliverables • 3 separate part files in .stp format • 1 assembly file in .stp format that accurately references the three parts Acceptance The job is complete when each file opens in SolidWorks without errors, all dimensions cross-check against the drawings within ±0.1 mm, and the assembly mates correctly without interference.

I need a specialized conveyor belt system for food production. The system will primarily be used for inspecting and rejecting raw ingredients. The customer has a conveyor that works on another line. It just needs to be copied. I can get all the dimensions but needs this to be drawn up to get manufactured overseas. I have photos Ideal Skills and Experience: - Experience designing food-grade conveyor systems. - Knowledge of food safety and hygiene standards. - Mechanical engineering skills, particularly in automation and conveyor technology. Looking forward to your proposals!

Job Description We are a steel fabrication company in the UK looking for a mechanical engineer with experience in pressure vessel design to produce calculation report for some pressure vessels we will be manufacturing Provide engineering calculations for: • Shell thickness • Head thickness • Nozzle reinforcement checks (main nozzles) • Hydrotest stress verification • Confirmation that the vessel falls within SEP classification We are not requesting a certified design package — only a competent engineering calculation report for fabrication verification. A calculation report including: • Assumptions and design basis • Material allowable stresses used • Formula references / method • Required shell thickness • Required head thickne...

I need an experienced AutoCAD designer to prepare basic CAD drawings for a simple tensile canopy structure (car parking / entrance canopy). Scope: 1. Top view plan with dimensions 2. Front & side elevations 3. Column positions and basic frame layout 4. Clean dimensioned drawing for fabrication Deliverables: 1. AutoCAD DWG file 2. PDF drawings I will provide basic dimensions and reference sketch/photos. Timeline: 1–2 days preferred.

I need a detail-oriented drafter who can produce complete ELV system drawings in AutoCAD. The scope covers every low-voltage discipline I use—CCTV, access control, and fire alarm—so you should be comfortable taking each of those from concept to coordinated set. The building type will vary from residential through commercial and industrial projects, so flexibility with different code requirements and layout standards is important. I will supply architectural backgrounds and any device schedules I already have; you will translate them into clear, layered DWG files ready for authority submission and site installation. Deliverables • Floor-by-floor device layouts • Riser or single-line diagrams for each system • Legends, cable routing, and basic material take-o...

Project Overview I have an existing 3D printable enclosure composed of 11 STL parts. The design has been printed once already, but the source STL files are incorrectly scaled, so they need to be resized and slightly modified. The goal is to adapt the design so it can house a compact smart speaker system for testing. This is primarily a mechanical design task involving resizing and modifying existing STL parts.

I have a fully registered Leica Cyclone REGISTER 360 BLK Edition project that I can export as an E57. I now need the entire scan set delivered as an Autodesk ReCap project (RCP/RCS) that retains the colourised point-cloud data and textures so I can carry out detailed engineering analysis in ReCap, Navisworks and AutoCAD. What I will supply • The original Cyclone REGISTER 360 BLK Edition file or an E57/RCP export, whichever you prefer. What I need back • A single RCP master file with its associated RCS slices, all correctly indexed, colourised and ready to open in Autodesk ReCap 2024. • Co-ordinate system, registration and scale preserved exactly as in the source data. • No loss of texture or point density. Acceptance criteria 1. The file opens in ReCap with...

I need a clean, 3-D printable STL file for a classical men’s ring. The overall look should lean on timeless proportions—think subtle curvature, no flashy modern edges—so it prints and polishes like a traditional signet. Check The Attached Files I need Printable Stl Files like wearable ring I will provide editable files of logo No Ai

I need detailed engineering drawings for a dual axle trailer specifically designed for transporting cement bags. The trailer will be used primarily for transporting construction materials, with a focus on cement bags. Requirements: - Ability to transport heavy loads securely - Durable construction materials - Compliance with safety standards - Detailed specifications including dimensions, weight capacity, and material list Ideal Skills and Experience: - Experience in trailer design or similar engineering projects - Knowledge of load distribution and stability - Proficiency in CAD software or similar design tools - Strong understanding of construction materials and their properties

I'm looking for an experienced CAD designer to create a mountain bike frame, primarily using carbon fiber. I have rough measurements but need assistance in refining them for further manufacturing of molds for the production of the frame. Key Requirements: - Design a mountain bike frame - Use of carbon fiber as primary material - Ability to work with and refine rough measurements. Ideal Skills and Experience: - Proficiency in CAD software - Experience in designing bike frames is advantage. - Strong understanding of carbon fiber properties and applications is an advantage but not necessarily. - Attention to detail and precision in design. Today we have the design on a sketch, work in progress with detail each part with dimensions that are close to reality. If it is interesting and y...

I have a complete bill of materials with every component dimensioned; I simply need those pieces assembled in SolidWorks so I can visualise the pneumatic press as a single 3D model. The brief is intentionally light—only a basic outline is required, no intricate fastener threads or surface textures—just clean geometry that reflects the overall size, clearances and mounting points. You will receive: • The BOM in spreadsheet form (part numbers, dimensions, and notes) • Reference photos of a similar unit for orientation clues Deliverables: • Native SolidWorks file (.SLDASM + .SLDPRT) showing the full assembly • A neutral STEP export for sharing with suppliers Acceptance criteria: 1. All parts placed and constrained correctly so the press opens and closes in a...

I’m developing a stainless-steel, double-walled water bottle built for everyday hydration. The bottle should hold between 24 – 32 oz and stay condensation-free, with a flip-top lid that seals securely yet opens one-handed. Core elements I need engineered: • An internal three-stage filter system (sediment, activated carbon, final micro-mesh) that seats firmly inside the neck, removes easily for cleaning, and works without a straw. • Vacuum-insulated, food-grade 18/8 stainless walls that keep drinks cold or hot for extended periods. • Ergonomic exterior profile that feels balanced when full, fits car cup-holders, and allows subtle branding space. Please deliver production-ready 3D CAD files (STEP or IGES), exploded assembly views, a short bill of materi...

We’re looking for an experienced Industrial Designer to help design the exterior look and feel of a sleek, modern, and friendly humanoid robot. This is focused on industrial design + form development (not full robotics engineering). Scope of Work - Create multiple concept directions for the robot’s overall design - Define proportions for head/face, torso, arms, and key “friendly” elements (approachable + premium) - Develop clean visual renders (2D/3D) and iterate based on feedback - Produce final deliverables suitable for engineering handoff Deliverables - 3–5 initial concept options (sketches or rough 3D) - 1 selected direction refined into high-quality renders - Basic 3D model (preferred) + key views (front/side/back) - Simple style guide (colors/materials...

I’m running a steady-state, two–phase condensation model for a single steam-carrying tube placed inside a rectangular duct through which the cooling medium flows. The goal is to quantify heat-transfer efficiency along the tube wall and map local condensation behaviour. All pre- and post-processing must be done in ANSYS Fluent – that is the environment my wider workflow depends on. I already have basic geometry and material data; what’s missing is a robust setup that captures phase change, solves for the temperature field on both sides of the tube, and outputs wall heat-flux, overall U-value, and condensate distribution with mesh-independent accuracy. Key points • Physics: two-phase (steam → liquid) condensation, steady-state, turbulent flow inside and ...

I am ready to move my mechanical wheel-end assembly from a rough concept to a fully filed U.S. and PCT application. To do that, I need the three cornerstone pieces of the submission produced to professional, examiner-ready quality: • Patent Claims – drafted to capture the inventive features and provide layered fallback positions. • Patent Description – a clear, enabling specification that aligns perfectly with the claims. • Patent Drawings – line-art illustrations prepared in strict accord with USPTO 37 CFR 1.84 so every figure number, margin, and line weight meets formal requirements. The concept is already sketched out, so you will start with my notes, preliminary sketches, and functional objectives, then refine them into a cohesive set of documents...

I'm looking for a skilled 3D AutoCAD designer to create a detailed drawing for a consumer electronics product, specifically a radio. The drawing should include internal components. Ideal Skills and Experience: - Proficiency in AutoCAD, especially for 3D modeling - Experience in designing consumer electronics - Attention to detail, particularly for internal components - Strong understanding of product design and functionality Please provide samples of similar work done.

I'm looking for a skilled 3D AutoCAD designer to create a detailed drawing for a consumer electronics product, specifically a radio. The drawing should include internal components. Ideal Skills and Experience: - Proficiency in AutoCAD, especially for 3D modeling - Experience in designing consumer electronics - Attention to detail, particularly for internal components - Strong understanding of product design and functionality Please provide samples of similar work done.

I need a mechanically minded drafter to turn my concepts into clear, production-ready drawings. The scope is strictly mechanical engineering design and drafting, and I want everything built in AutoCAD so I can integrate the files with our existing library. You will receive: • Hand sketches, key dimensions, and functional notes for a small assembly. • Reference photos of similar parts we already manufacture. What I expect back: • Fully detailed 2D AutoCAD drawings (.dwg) with clean layers, correct line weights, and an organised model/paper-space setup. • Exploded views and call-outs for critical tolerances. • A PDF drawing set for quick review. Acceptance criteria: 1. All dimensions in millimetres, tolerance block included. 2. Title block populated with t...

I’m developing a set of custom aluminium parts and need a design engineer who can turn my concept sketches into fabrication-ready CAD data. The scope is purely Design and CAD modeling; I’ll handle machining and welding later once the files are final. You’ll translate rough ideas into precise, manufacturable geometry, keeping typical aluminium constraints in mind—bending radii, minimum wall thickness, and CNC-friendly tolerances. I usually work in SolidWorks, but STEP or IGES from Fusion 360, Inventor, or similar is fine as long as the models remain fully parametric. Deliverables • Detailed 3D models of each part • 2D manufacturing drawings with dimensions, tolerances, and material specifications • An assembly file confirming fit, clearance, an...

I need a detailed CNC-ready design for a small metal disc that will act as a machine part inside one of our assemblies. The core requirement is precision: the profile, hole pattern, and thickness all have to meet tight tolerances so the disc drops straight into an existing housing with no post-machining tweaks. Here is what I am expecting from you: • A fully dimensioned 3D CAD model (STEP or IGES) • Manufacturing drawings with critical tolerances called out • CAM data or G-code that can run on a standard 3-axis mill or lathe Material, cutter, and setup suggestions are welcome as long as they support repeatable accuracy. Surface finish is less important than getting the dimensions perfect, but feel free to recommend tweaks that could improve both if it doesn’t ...

I'm seeking a detailed 3D technical blueprint for a woodworking workshop. The blueprint will be used primarily as a technical reference. The layout must include: - Machine placement - Workbenches and tables Ideal skills and experience: - Proficiency in 3D modeling software (e.g., AutoCAD, SketchUp) - Experience in creating technical blueprints - Knowledge of woodworking workshop layouts

I need a skilled 3D designer to create a functional part for a switchboard, intended for final production. The part should be designed using PLA material. Key requirements: - Expertise in 3D modeling and printing - Experience with functional part design - Proficiency in using PLA for durability and functionality Ideal skills and experience: - Background in engineering or industrial design - Strong attention to detail - Ability to provide design files ready for 3D printing Please include relevant portfolio work.

I have a set of 2D sketches that I need turned into clean, accurate SolidWorks parts and simple assemblies. The models should carry a moderate level of detail—fillets, mounting holes, and any visible features that help the design look realistic—without over-engineering every tiny chamfer. The end goal is product presentation, so I’ll rely on you to produce native SolidWorks files that look good when shaded and hold up for high-resolution renders. If you can sprinkle in basic appearances or textures, even better, but the core requirement is geometry that reads well in visuals. Deliverables • SolidWorks part (.SLDPRT) and, where relevant, assembly (.SLDASM) files • A neutral STEP export for quick sharing • A brief note highlighting any assumption...

I have a high-resolution 3D scan of a small product that I now need cleaned up and completely redrawn as a true CAD-quality model. The scan is accurate in overall form, but the mesh is noisy and unsuitable for manufacturing, so your task is to trace the geometry, rebuild clean surfaces, and deliver a watertight file ready for 3D printing. Scope • Import my provided scan (OBJ) into your preferred software—ZBrush, Blender, Fusion 360, or similar. • Retopologize or remodel every feature so the result is smooth, free of artefacts, and matches the original dimensions within ±0.1 mm. High detail is essential; all subtle grooves, fillets, and logos on the product must be retained. • Make sure the final model has correct wall thicknesses and no non-manifold edges...

I need a CAD designer to create a basic shape and size model of a plastic swimming shoe. Requirements: - Experience with CAD software - Ability to create 3D printable models - Attention to design specifications Ideal Skills & Experience: - Previous work with footwear design - Familiarity with 3D printing requirements - Proficient in STL, OBJ, or 3MF formats Please submit relevant portfolio work.

I need a precise, full-featured 3D model of a robot in AutoCAD. This is a mechanical design task, not architectural or electrical, and I’m after more than a basic outline or a set of flat drawings—I want complete solid models that can be rotated, sectioned, and dimensioned for manufacturing. I will supply hand sketches, reference photos, and key dimensions as soon as we start. Your job is to convert that information into native DWG solids accurate to the tolerances I provide. If you prefer to draft in Inventor, SolidWorks, or Fusion 360 first and then export, that’s fine, as long as the final delivery is a clean, well-layered AutoCAD file with no missing features. Deliverables: • Editable AutoCAD DWG file(s) containing the full 3D geometry • A neutral STEP o...

Warehouse MEP Design Drawings (Electrical, Plumbing & Mechanical) Project Description: We are seeking an experienced MEP designer/engineer to prepare a complete set of MEP design drawings for a warehouse building project. The drawings will be used for construction and coordination with architectural and structural drawings. Scope of Work: The selected freelancer will be responsible for preparing the following drawings: • Electrical layout (lighting, power outlets, distribution boards) • Lighting layout with switching and circuiting • Cable routing and panel schedules • Plumbing layout (water supply and drainage) • Mechanical layout (ventilation/exhaust if required) • Coordination with architectural/structural drawings • Basic load calculations wher...

I have a conical rainhead to fabricate in stainless steel with a base diameter larger than 20 inches. Before any cutting begins on the workshop’s CNC plasma, I need a clean, ready-to-cut flat pattern that unfolds the cone accurately, includes all seam allowances, and clearly marks bend lines, notches, and any overlap for TIG welding. Send me: • A fully dimensioned 2D pattern in DWG or DXF • A PDF print for quick shop reference • A short note on the development method you used (SolidWorks sheet-metal feature, AutoCAD, Inventor, etc.) so my team can reproduce it later if we tweak the angles. Tolerance target is ±0.5 mm along critical edges; please keep that in mind when laying out arcs and stretch-outs. If you have produced flat patterns for large-diameter ...

I have a steel storage box fitted with two lightweight, self-closing doors—one on the front and one on the top. The current hinges sit on the outside of the cabinet, and they spoil the overall look. I want to keep the same self-closing performance but move the hinge mechanism inside the enclosure and do it in a cost-effective way. Here is what I need from you: • Study the existing setup and door geometry. • Propose at least one practical internal hinge concept that can handle doors of up to 5 kg without sacrificing the automatic return action. • Provide basic CAD drawings or sketches with dimensions, material callouts, and mounting details so my fabricator can implement the change. • List any off-the-shelf components required (torsion springs, concealed h...

I already have a clear vision for a slim, leather-look metal wallet and now need a precise 3D model that turns that idea into manufacturable reality. The body must be metal, yet the outer surfaces should visually echo premium leather grain. Internally, I want two separate compartments that together hold at least 8–9 cards, with integrated RFID-blocking and enough tolerance so cards slide out smoothly but stay secure when the wallet is closed. Here’s what I need from you: • A fully detailed CAD model (STEP or SolidWorks preferred) suitable for CNC machining or metal injection moulding, including all parting lines, draft angles and hardware call-outs. • High-quality renders that showcase the texture, colour, and overall form so I can review aesthetics before tooling...

I have a steady stream of medium-sized plastic parts—anywhere from 3 cm to 20 cm long—that must be turned into clean, production-ready 3D models. Every item is destined for functional prototyping, so dimensional accuracy and straight-forward manufacturability come first; surface ornamentation is minimal because the shapes themselves are simple. Here is what you can expect: • I supply sketches, reference photos, or existing 2D drawings with critical dimensions. • You translate them into precise 3D geometry and return a STEP file that is ready for 3D printing or later hand-off to a mold maker. • Most parts will be basic housings, clips, or spacers—rarely anything with complex organic curves—so fast turnaround is achievable. • We may go throu...

I need someone to take my rough sketch of a medium-sized aluminium burley bucket (30-60 cm) and create a CNC-compatible DXF file. Requirements: - Convert rough sketch into precise CNC drawing - Deliver in DXF format Ideal Skills: - Proficiency in CAD software - Experience with CNC file creation - Attention to detail

I have a PET bottle concept design. The right image shows the desired final look with advanced smooth surfacing and twist features. I need an expert in advanced surface modeling to convert the curve-based design into a smooth, production-ready PET bottle parasolid model.

I have an initial CAD model for a biomechanical hoof-protection shoe and now need it refined for real-world 3D-printed prototyping. The single most important improvement is a heel expansion flex zone that delivers a controlled 2–4 mm of movement under load. This flex feature must run across both heels and taper slightly toward the frog so the hoof can widen naturally without compromising strength on rocky ground. Beyond that critical zone, I also want you to: refine the frog relief, introduce a smooth toe rocker for easier break-over, carve a subtle concave sole contour, and generally lighten and reinforce the structure so it survives repeated impact when printed in TPU or flexible nylon. The updated geometry has to remain friendly to FDM or SLS printing, with clean overhangs and ra...

I am looking for a mechanical designer to create a compact protective frame for a Midas DL431 (6U rack device) using 1" × 1" 80/20 aluminum extrusion. The DL431 should mount using its front rack ears and standard rack rails, and the frame should act as a lightweight touring exoskeleton that protects the unit while remaining open on the sides for airflow and lifting. The framed unit must fit inside a Pelican 1637 Air case, include rear protection for connectors and attached cabling, and allow two identical frames to stack securely using a simple locating or pin system. I need a 3D CAD model, dimensioned drawings, and a complete 80/20 cut list and hardware list so the frame can be fabricated easily. I am specifically looking for someone with practical experience designing al...

I'm seeking a skilled 3D modeler to add the final touches to my nearly complete electric motorcycle design. Requirements: - Enhance model with detailing and embellishments - Ensure accuracy in dimensions and technical functions Ideal Skills: - Proficiency in 3D modeling software (e.g., Blender, SolidWorks) - Experience in vehicle design, especially motorcycles - Strong eye for detail and design aesthetics Your expertise will help bring my vision to life!

I have a consumer-goods concept that has already taken shape in my sketches, and now I need it translated into precise 2D drawings in SolidWorks. The goal is to secure clean, production-ready documentation that a manufacturer can reference without guesswork. Here’s what I expect: • Detailed orthographic views with accurate dimensions, tolerances, and annotations • Proper layer management, line weights, and title blocks that follow standard drafting conventions • Source files in native SolidWorks format plus exported PDFs for quick sharing Because this phase is strictly 2D drafting for product design, no simulation or 3D modeling is required—just crisp, fabrication-ready sheets that capture every feature of the part. If you are fluent in SolidWorks dra...

I’m developing a new kinetic system intended for a manufacturing environment and need a fresh, well-engineered concept that I can carry straight into prototyping and, ultimately, production. Your task is to interpret the functional goals I share, translate them into a robust motion mechanism, and supply all the documentation that shows how it works and why it will hold up on the factory floor. Here’s what I’ll be looking for: • A clear, step-by-step explanation of the motion sequence, including any cam, linkage, or gear interactions that drive it • 2D sketches or 3D CAD layouts that illustrate component relationships and spatial constraints • Basic calculations or simulations that justify key parameters (torque, speed, duty cycle, fatigue life) &bull...

I’m building a free-standing kinetic installation that tells a historical story through moving mechanical elements rather than costumed characters or electronics-heavy animatronics. The prop will rely on gears, cams, counterweights, and simple motor drives to create repeated, reliable motion sequences that feel period-authentic while still meeting modern safety standards. Here’s what I need from you: • Concept development that blends accurate historical styling with eye-catching, repeatable movement. • Mechanical schematics or CAD models (SolidWorks, Fusion 360, or comparable) showing linkages, drive systems, and fastener choices. • A concise bill of materials noting readily available components and period-appropriate finishes. • Assembly guidance and, if ...