Building Regulations Jobs

I'm seeking a licensed PE to creview andcstamp full architectural set with MEP for a simple retail store build-out. The store is between 1,000 - 5,000 sq ft. Requirements: - Review and Stamp for certification (Ohio Rev Codes 2024 and Twinsburg city codes) Ideal Skills & Experience: - Experience with retail store designs - Knowledge of local building codes and regulations - Strong attention to detail

Quantity Surveying & Cost Estimation for Conversion, Extension & Refurbishment Project Location: 178-180 Edgware Road, London Project Scope: Internal refurbishment, multi-flat conversion, and structural vertical extension (addition of new floors). Project Overview & Objectives We are seeking a qualified freelance Quantity Estimator / Quantity Surveyor to produce a detailed, itemised Cost Estimate and Schedule of Works for a major residential/mixed-use redevelopment project in Central London. The development involves the internal reconfiguration and high-specification fit-out of the existing structure, alongside a vertical extension adding additional floors to maximize site density. Key Scope Elements Structural & Vertical Extension: Construction of new additional floor...

I need a licensed structural engineer in North Carolina to review and stamp for the removal of a part of an interior wall and fireplace in my residential property. The opposite wall has no additional supports like this one and is made the same. Requirements: - Verify if the wall and fireplace are non-load bearing - Provide professional assessment and necessary documentation for the project - Must have an active license in North Carolina Ideal Skills and Experience: - Structural engineering expertise - Experience with residential properties - Familiarity with North Carolina building codes and regulations - Ability to work without existing construction plans or blueprints Please provide your license details and relevant experience.

I'm looking for a skilled architect or designer to create a 2-bedroom casita for personal use. The style should be Southwestern with a flat roof, and the size should be between 500-700 sq ft. Due to lot limitations, the structure should be 30-32 feet north to south and 22-24 feet east to west. The living room-kitchen is on the north end, featuring large accordion doors on both the north wall (12x8 feet) and east wall (12x8 feet). The building will serve as a pool house with an open indoor-outdoor design. It must integrate seamlessly with existing structures and will be constructed using integrated concrete forms (ICF) for walls and roof. A large folding window is needed in the kitchen area, and I’d like to include a patio cover similar to the one on the existing home, wrapping...

Daily supervision is required on an active commercial building site in Yelahanka, Bangalore. I need a diploma-qualified civil engineer who can be on site every working day, circulate between work fronts on your own vehicle, and prepare all reports on your own laptop. Core scope • Oversee day-to-day site activities, checking that work is executed exactly to approved drawings and schedules. • Coordinate trades, vendors, and material deliveries to keep the programme on track and avoid clashes. • Record progress with date-stamped photographs, measurements, and concise progress notes entered into Excel or similar each evening. • Flag technical issues early, liaise with my design team for clarifications, and ensure corrective actions are closed out. • Enforce ...

I need a certified professional to post roof installation certification WPI-2E for a residential property. The roof has been replaced with asphalt shingles. Requirements: - Must be licensed and insured - Familiar with WPI-2E certification process - Experience with residential properties and asphalt shingle roofs - Ability to provide necessary documentation and pass any required inspections Ideal Skills and Experience: - Roofing contractor experience - Knowledge of local building codes and regulations - Attention to detail and reliability Please provide proof of credentials with your bid.

Project Overview I am seeking an experienced Architectural Designer or Architect to prepare a high-quality planning application package for a proposed one-off rural dwelling in County Meath, Ireland. The proposed dwelling will be approximately 100m² and must be designed in accordance with: • Meath Rural House Design Guide. • Meath County Development Plan. • Irish Building Regulations. • EPA wastewater treatment requirements. • Meath County Council planning and roads standards. I will provide rough concept sketches and layout ideas. These should be considered preliminary concepts only. The successful candidate will be expected to: • Refine and optimise the internal layout. • Improve the architectural design and external appearance. • Ensure compl...

I need a permit-ready plan package for an approximately 20-by-30-foot open detached carport in unincorporated Palm Beach County, FL 33410. The parcel PCN begins with 00. The survey identifies the parcel as Flood Zone X/AH, NAVD88, and the proposed footprint may extend into Zone AH. Please provide a proposal that includes: site-plan coordination from my survey; confirmation of setbacks/eave limits; structural design and Florida PE-sealed plans/calculations for attachment to the house, posts, beams, roof, hurricane wind uplift/lateral loads, footings/slab/anchors; product-approval schedule; and coordination of the flood elevation/foundation requirements. Please state whether your fee includes County plan-review responses/revisions, and identify any items that require a separate surveyor, c...

I need assistance placing a single-story modular home on a small, subsidized plot (up to 5,000 sq ft). The plot is currently prepared for a concrete slab foundation. Key Requirements: - Experience with modular home installation - Familiarity with concrete slab foundations - Ability to work on subsidized plots Ideal Skills: - Construction and site preparation - Knowledge of local zoning and regulations - Project management skills Please provide relevant experience in your bids.

I need a detailed evaluation and report on a residential property's foundation. The primary concern is cracks and damage, specifically on the foundation slab. Requirements: - Professional evaluation of foundation slab - Detailed report on condition, severity of cracks/damage - Recommendations for repairs and maintenance Ideal Skills and Experience: - Experience in structural engineering or foundation repair - Knowledge of residential foundation issues - Ability to provide comprehensive, clear reports Looking for qualified professionals to ensure safety and stability of the property.

URGENT ‼️ A residential multi-family building in South Delhi needs a thorough structural safety audit. The task involves an on-site inspection supported by visual checks and any non-destructive testing you consider necessary to verify the integrity of columns, beams, slabs and foundations. All observations must be benchmarked against current Indian standards and the local building by-laws so that the final verdict on safety is clear, defensible and action-oriented. Deliverables • Executive summary rating the present safety condition • Detailed report with photographs, test data and annotated drawings • Risk matrix highlighting critical, moderate and minor issues • Practical recommendations for immediate repair, long-term strengthening and routine maintenance...

I have a brick exterior wall that currently holds a window. I already know this wall is load-bearing, and I do not need help confirming that; what I need is a qualified professional who can safely remove the necessary section, carry the load correctly, and leave me with a cleanly framed opening for a standard single door. The job covers everything from temporary shoring through to the final trim: • Calculate and install the appropriate lintel or steel beam so the structure remains sound. • Remove the brickwork around the existing window, widen as required, and dispose of debris. • Frame, plumb, and square the new opening for a single door, ready for my chosen door unit. • Make good on internal and external finishes so the new doorway blends with the surrounding w...

Hello, I’m looking for a quote to prepare engineered drawings for an existing retaining wall and a shed at my home in Fort Salonga. For the retaining wall, The Town of Smithtown requires the wall to be legalized because the section near the curb is over four feet high. For the shed which has already been built we need drawings to submit and any other work needed to bring it up to code. Please let me know your estimated cost and availability. I can provide the inspection notice, survey, measurements, and photos.

I need a metal pipe installed for water diversion. The length required is between 10 to 50 meters. Requirements: - Experience with metal piping - Knowledge of water diversion techniques - Ability to ensure proper installation to prevent leaks and damage Ideal Skills and Experience: - Previous plumbing or piping installation experience - Familiarity with local regulations regarding water diversion - Strong problem-solving skills to handle any site-specific challenges I live at 2974 Cynthia Drive NE in Brookhaven GA 30319. I have a creek that runs through my front yard. I want to apply for my creek to be piped and it needs to start at the Corp or army engineers for approval and then to the city of Brookhaven.

I need a licensed engineer registered in Québec to size and detail a small concrete basement that will anchor a series of aluminium trusses. The site sits on compacted gravel, and our prime concern is ice and frost heaving during winter. I’m leaning toward a traditional steel-rebar reinforcement layout and want the design to comply with both the Québec Construction Code and CSA A23.3. Scope • Determine the required footing depth below the frost line, wall thickness, and slab specifications. • Provide concrete mix recommendations, insulation strategy, and all rebar schedules. • Supply stamped structural calculations and construction drawings (PDF + DWG) ready for permit submission. Acceptance All documents must carry your Québec engineer...

I need a shaftless Terry Lifestyle lift installed in my residential home in Israel, accessing two floors. Structural works would be done by a local engineering company. The lift hardware has Israel Standards approval. Requirements: - Experience with shaftless lift installation - Knowledge of Israeli residential building codes and regulations - Ability to ensure safety and functionality Ideal Skills: - Background in elevator/lift installation - Strong attention to detail - Excellent problem-solving skills Please provide a portfolio of similar work.

I need an experienced contractor to replace a load-bearing wall measuring 10-20 feet with LVLs. The wall supports the second floor, and I need assistance with design and placement. Key Requirements: - Experience with structural modifications - Proficiency in LVL installation - Ability to provide design solutions Ideal Skills: - Structural engineering background - Carpentry expertise - Knowledge of building codes and safety regulations

I need a clear, legally sound construction and building contract tailored for an upcoming infrastructure project—specifically road and bridge works. The document must establish scope, performance standards, payment milestones, variations, delay provisions, warranties, insurance, and dispute-resolution procedures that fit the realities of heavy civil works. I will provide the technical specifications, project timeline, and any governing standards once we start. Your job is to translate those details into a contract that protects both owner and contractor while staying compliant with local procurement and safety regulations. A background in civil or infrastructure contracting law is strongly preferred. Deliverables • Draft contract in editable Word format • One revision...

I need to remove two wooden walls in my single-family house to create an open kitchen layout. The project requires a load-bearing inspection and installation of a flush beam. Requirements: - Experience with load-bearing wall removal - Skilled in installing structural beams - Knowledge of working with wooden wall materials

I need an amendment to my residential permit for a deck due to an error in the original permit. The issue is mislabeling of structures, specifically the deck. Requirements: - Amend existing residential permit - Correct mislabeling of the deck - recommend any changes and structural modifications to meet building code Ideal Skills and Experience: - Familiarity with local permit regulations - Experience in handling permit amendments - Attention to detail to ensure accuracy - PE license in the state of CT

I need a skilled contractor to evaluate and suggest necessary modifications on a project under construction, a cantilevered wooden deck primarily for entertainment. The deck will be situated lakeside, enhancing the view and experience. Key Requirements: - The structure must extend from an existing beam, which is 12 ft above a poured concrete footing and 5 ft wall and currently spans 14 ft. The deck has an 8 ft backspan. It is planned for a 4 ft cantilever. The beam is Prowood Truframe 2x12. - The design must account for the proximity to the water and ensure safety and stability. Ideal Skills and Experience: - Expertise in cantilevered structures - Proficiency in woodworking and deck construction - Experience with lakeside construction projects - Knowledge of local building codes and regu...

I need assistance obtaining a permit for a residential metal storage shed already located in my side yard. The City of KCMO is need engineering plans and permit for this building that has been on my property for over 5 years. The ideal freelancer should have experience with residential building permits, especially for metal structures for Kansas City, MO. Knowledge of local zoning laws and regulations is a plus. Please provide a clear plan and timeline for the permit application process

I already have complete construction drawings prepared by an overseas architect for a new-build commercial fit-out in Beloit. What I still lack is the local expertise required to satisfy every City of Beloit and State of Wisconsin permitting demand. I need a Wisconsin-licensed architect to take my current set, review it in detail, make any revisions you deem necessary for structural integrity, energy and accessibility compliance, exterior appearance standards, and all other code items, then seal the package so it is ready for submission. Key deliverables I will look for: • Updated, Wisconsin-code-compliant Site Plans bearing your stamp • Accompanying Engineering Reports (structural calculations, energy compliance, etc.) suitable for the permit file • A final PDF se...

I'm seeking a Washington State Licensed Structural Engineer (SE) for a high-rise project. A Professional Engineer (PE) license is not required, but familiarity with local/state codes is essential. Key requirements: - Structural analysis - Design calculations - Compliance with local/state-specific codes Ideal skills and experience: - Expertise in high-rise structures - Strong knowledge of Washington State building regulations - Proven track record in similar projects Please provide relevant work experience and qualifications in your bids.