Traffic controller project using 8051 jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,262 traffic controller project using 8051 jobs found, pricing in CAD

    ...design to build such a system, ideally using an open-source control board and hat. I am using a 110v (standard US plug) heating and cooling thermostat, with a plug for heating and a plug for cooling devices. I would prefer this circuit to utilize that system rather than building a dedicated temp sensor and controller system. That way I can also use those

    $557 (Avg Bid)
    $557 Avg Bid
    4 bids

    Build a virtual app that shall control dual channel dc controller through RS232. Application shall be compatible for Windows 7/10 Application details document will be provided in PM

    $1500 (Avg Bid)
    $1500 Avg Bid
    42 bids

    Hello, we have a requirement to design and layout a PCB single sided SMT which is powered and monitors a 12V battery. 2. Monitor the output voltage of the battery pack. ( voltages as specified in the battery data sheet) 3. Illuminate led when battery output voltage is at x.x volts (to be specified) 4. Except an input from a latching switch 5. Soft start and shut down LEDs 6. Turn LEDs off after a...

    $847 (Avg Bid)
    $847 Avg Bid
    42 bids

    ...[login to view URL] An intermittent wiper relay will also be needed video here [login to view URL] Will be using the front wiper motor from a 2012 Toyota Yaris and the switch from a 1998 Chrysler Sebring. Thank you Timeframe ASAP I also need detailed instruction on the process of putting

    $202 (Avg Bid)
    $202 Avg Bid
    4 bids

    Hi, We looking for a freelance who can program PIC controller to interface with android app. Develop Android app. PIC controller to logic solver for digital inputs and output relays. Analogue inputs.

    $3510 (Avg Bid)
    $3510 Avg Bid
    27 bids

    [login to view URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer with atmega8 or atmega328

    $166 (Avg Bid)
    $166 Avg Bid
    1 bids

    : To design and implement a RESTful API that will provide an access endpoint to a data source controller : [login to view URL] - Everything you Need!

    $159 (Avg Bid)
    $159 Avg Bid
    18 bids

    [login to view URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer atmega8 or atmega328

    $251 (Avg Bid)
    $251 Avg Bid
    5 bids

    I want to make something like this [login to view URL] I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer to use atmega 8 or atmega328

    $98 (Avg Bid)
    $98 Avg Bid
    3 bids

    [login to view URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts.

    $249 (Avg Bid)
    $249 Avg Bid
    4 bids

    1. Create a Spring Rest controller which receive bill number and fetch bill details from database and generate pdf then send it as a response through rest api. Client side it should download automatically. 2. Create a Spring Rest controller which receive bill number and fetch bill details from database and directly print should happen. Invoice format

    $22 (Avg Bid)
    $22 Avg Bid
    4 bids

    I need 8051 Micro-controller Expert for Coding. please only bid if you have work with 8051 controller and have install proper software for that. thanks

    $221 (Avg Bid)
    $221 Avg Bid
    21 bids

    I need to control induction heating with Arduino and need to connect load cell to Arduino and read the reading and control solenoid wall or stepper motor when desired weight is achieved .

    $183 (Avg Bid)
    $183 Avg Bid
    17 bids

    ...handle multiple tasks simultaneously and interact with the construction project team. 100% of the job will be done online. You will be provided with access to project's cloud storage for work Job description includes : 1. keeping track of important project documents like project plans, blueprints, vendor contracts and drawings; 2. creating reports

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    20 bids

    We need a web GUI built to manage DIDs and routing on our session border controller, which uses a mySQL compatible backend database. In addition to basic authentication, we will need a few different levels of user control, auditing of changes, and modules for DID addition, deletion, update, bulk update, and system management. I expect a total of

    $1586 (Avg Bid)
    $1586 Avg Bid
    32 bids

    Unifi controller url setup- Setup url to access it publicly

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    3 bids

    We need an urgent IT to set up a url for our unifi controller, so we can access our unifi onilne remotely

    $35 (Avg Bid)
    $35 Avg Bid
    2 bids

    We have a Unifi which has a local controller. We want to convert that local controller to a universal controller that has a URL, that we can access online

    $13 - $39
    $13 - $39
    0 bids

    Hello I am the owner of next Age cycles. I'm looking to have 3 custom pcbs made. The first one is for a brushless motor controller that will have many extra features and run about 200amp high voltage. Also need a BMS for a lithium ion. And I also need a display screen to go along with all of this and have them communicate with each other. More information

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    28 bids

    This is a project for writing a PRD (product requirements document) that describes in more technical detail what the product described below will do, what pieces are required, and at a high level how each one of them should function. The document should include target performance, price, power, size and other metrics. I would need the freelancer to

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    7 bids

    please read carefully. we wish to automate our window shutters to move up and down via a wall mounted controller connected to mains electric 240 [login to view URL] the contoller work via wifi to operate the shutters

    $251 (Avg Bid)
    $251 Avg Bid
    10 bids

    Hi . I am looking for a simple controller for unity3d. need a cube when it jump it flip the cube in air. and if double jump then it double flip the cube. Looking forward to discuss further.

    $23 (Avg Bid)
    $23 Avg Bid
    12 bids

    Looking to create the flow charts from an existing PLC ladder program. Ladder program about 500 lines and will be forwarder through private mail. HMI Ladder PLC. More work to follow with rework of program to enable new features like remote reporting and automatic exporting of CSV files to web server.

    $247 (Avg Bid)
    $247 Avg Bid
    12 bids

    ...production a PCIe x4 board with dual NIC controller Intel i350. The two SerDes interfaces of the i350 controller should be linked to two 400pin connectors. The 400pin connectors will be used to attach NVidia Jetson TX2 modules to the board. The Jetson TX2 modules will draw power from PCIe connector. The goal of the project is to connect two NVidia Jetson TX2

    $1880 (Avg Bid)
    $1880 Avg Bid
    9 bids

    Hello everyone, I want you to do a very simple job, I have mocap animations already done, I want you to create a mechanim place them and make 2 character controllers one for PC and another for iOS. I want them to look just like the mocap video, I sent them the link to the private. This is a one day job, there are three mocap assets (Mobility, Rifle and Pistol) They are very professional, Please ...

    $120 (Avg Bid)
    $120 Avg Bid
    9 bids

    We want a P10 single colour led controller designed with a STM32F4 based device or similar - we want 8 x HUB12 ports. It MUST support greyscale / brightness control of each led - 8 bits per led. We want to be able to show images, text, animations and greyscale videos

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    2 bids

    Hi guys, I've done a sim...design to test the SRAM of Digilent Cmod A7 FPGA board. This is how it works: Using a terminal through UART, I send the input data and address to the SRAM. Then I send address where to read, and I get back the data previously written. Everything works OK except the controller. I need someone to review my design and fix it.

    $25 (Avg Bid)
    $25 Avg Bid
    6 bids

    ...means that you can split it in variable sizes and able to expand it being magnetic on the sides. It would need also some faders, knobs, pads like the Korg nanoKONTROL2 or using touch strips. I use mainly Ableton and sometimes Logic X too on my Mac laptop, it would be great to have a touch strip for example on the keyboard that shows all the sound

    $633 (Avg Bid)
    $633 Avg Bid
    10 bids

    I am doing a oroject in which i need 3D designs of bike's Side-Stand, right switch controller (on handle bar) , push-pull switch and push button

    $25 (Avg Bid)
    $25 Avg Bid
    18 bids

    Firstly, I want to implement online traffic classification means (built classifier in switch and controller) by (semi-supervised techniques on incremental kmeans) that classifies service types to (elephant flow and mice flow) in software defined networking (SDN). Secondly, After I will use the input types of traffic (elephant flow or mice flow) and other

    $617 (Avg Bid)
    $617 Avg Bid
    12 bids

    ...need help setting up a Unifi controller as well as Let's Encrypt SSL Certificate on a Digitalocean drip. I have tried a lot of times and followed some guides but unsuccessfully. Therefore, I'm looking for someone who can do this for me. You can see a guide at: [login to view URL] It should not take more

    $50 (Avg Bid)
    $50 Avg Bid
    20 bids

    Internet Flow Controller Send rate of flow to the server (hall effect flowmeter, YF-S201 or similar) Receive web requests to fire a solenoid valve on/off. Using ESP8266 Powered by Rechargeable Battery (recharging through solar panels) The PCB Should have two on-board screw connectors to connect sensor (1) and an actuator(2) externally. 1. Flowmeter

    $586 (Avg Bid)
    $586 Avg Bid
    8 bids

    Create a custom SPI master controller with single, dual, and QUAD operation modes in VHDL for a MAX V CPLD.

    $510 (Avg Bid)
    $510 Avg Bid
    9 bids

    This is the first step of the project: Starting from Software Examples for 8051 Processors and Temperature Humidity sensor documentation, I need a working sketch for ESP8266 NODEMCU V1 or WEMOS D1 Mini. The themperature values and the humidity must be read from the blynk application. Documents in PM. The next step will be a xamarin app for android

    $274 (Avg Bid)
    $274 Avg Bid
    9 bids

    We have an access controller for our doors in our building. Our cards are not reading correctly. Please help troubleshoot system remotely.

    $202 (Avg Bid)
    $202 Avg Bid
    1 bids

    It is a simple app that will be able to send sysEX messages to midi device, I will define all the midi messages that needed to be assigned for each key and button.. a nice attractive layout will be important .. all key functions will be discussed in details.

    $162 (Avg Bid)
    $162 Avg Bid
    5 bids

    I am looking for someone to develop some code to use on a raspberry pi to control my camera. I would like it to have two modes, an inside mode and an outside mode. Depending on what mode it is in, it will change the settings.

    $219 (Avg Bid)
    $219 Avg Bid
    12 bids

    We have to do a electric heater, and we will make it with heating cable and others supplies, but t...create different programs by users (vacations, weekly, winter, etc). This electric heater receive their electric energy from solar panels and lithium batteries system. This project is thinking how a solution for the wood burning in the south of Chile.

    $3235 (Avg Bid)
    $3235 Avg Bid
    29 bids

    Need to develop software to implement PD and PID controllers using python

    $687 (Avg Bid)
    $687 Avg Bid
    23 bids

    Proportional and Integral controller for demand control ventilation system based on fan and co2 sensor. Simulation of system in simulink.

    $234 (Avg Bid)
    $234 Avg Bid
    2 bids

    Serious bidders only, award and payment through freelance platform only. I need to build a program that 1) mines bitcoin connected to a pool 2) independent from a computer through this (ESP8622 wifi Lolin v3) arduino based microcontroller ... exact detail of it's function in the attached video I have all the pieces of the microcontroller, the stratum pool account info, a bitcoin wallet addr...

    $228 (Avg Bid)
    $228 Avg Bid
    7 bids

    Require a freelancer to write a code in C language for Digital Weigh Balance using cs5460absz and 8051 (89S51/52) Microcontroller. Display on six- 7 Segments. Features to be of standard digital balance- weighing scale with memory (EEPROM)nd 8051 (89S51/52) Microcontroller. Display on six- 7 Segments. Features to be of standard digital balance- weighing

    $55 (Avg Bid)
    $55 Avg Bid
    3 bids

    Hi I am looking for a unity 3D developer to a simple controller . it is based on physics. A spring to shot a ball.. Look at this video from length of 8:06 [login to view URL] Thanks

    $31 (Avg Bid)
    $31 Avg Bid
    12 bids

    I need to implement an existing project (AVR194 application note) to work with my setup. There are things that I do not need and things I want to be added. Like, for example, PC6 pulled to high, then after 100ms, PB3 pulled to high, get current value on PD1 and pull PC6 low if overcurrent occures, not via a shunt like in app note.

    $166 (Avg Bid)
    $166 Avg Bid
    8 bids

    Use the random function to retrieve a variable value to output value from array into display views. This is codeigniter site with php, Everything is currently working perfectly.

    $35 (Avg Bid)
    $35 Avg Bid
    19 bids

    ...Good At: • Work experience: 1 - 5 years • Experience in software design and development using in OOD, TDD, ATDD • Good at C / C ++ Python programming languages for embedded systems software • Good background with Microprocessor and Microcontrollers (ARM, PIC, 8051, etc.) and development tools (GNU GCC, IAR, ICE, etc.). • Experience with Embedded OS (Linux

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    25 bids

    I have a Software Defined Networking (SDN) project, and I need to create a web page which takes an IP address from textbox in the web page then send it with the protocol and the exit interface to the Ryu controller ( the SDN server controller ) which is using a Linux operating system by using CURL command like the attachment, then show the routing table

    $128 (Avg Bid)
    $128 Avg Bid
    4 bids

    Looking for the "IR" code of the remote controller for the 10" Digital Photo Frame "EARME". Attached the photo frame and remote controller pictures for reference. I have the "Down" key IR code for the remote controller, for reference: This is "Down" key IR code it use, "0000 006D 0022 0002 0159 00AD 0016 0016 0016 0016 0016 0...

    $9 (Avg Bid)
    $9 Avg Bid
    1 bids

    I would like to have a wireless custom wearable DJ Controller built. and want to know how much that would cost? some of the specs are that it allows for scratching, hot cues, has a vocoder and talkbox vocal effect, etc. I want it to be light and portable. Similar to how guitarists wear a guitar strap except this is like a vest that can be put on.

    $4852 (Avg Bid)
    $4852 Avg Bid
    9 bids

    I I'm developing a u...unity game, I'm which the existing character controller is only for blocky characters. I need your help to change the character controller in game for humanoid characters. I also have third person character controller plugin for this. Need your assistance to replace it in game. The game is multiplayer using unity u net service.

    $30 (Avg Bid)
    $30 Avg Bid
    11 bids