Shf20 shaft support 3d model jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    814 shf20 shaft support 3d model jobs found, pricing in CAD

    Complete 4 worm Gears and 1 worm shaft: 3d Models and drawing for each

    $263 (Avg Bid)
    $263 Avg Bid
    1 bids

    I have a round shaft that I need analysed on ANSYS properly. I need the shaft supported so it may get longer, but never shorter (like a bolt with no pretension applied). It will have two compression supports and two combined loads (axial and radial) applied near the centre, so it simulates the type of loading you would see in the assembly picture.

    $96 (Avg Bid)
    $96 Avg Bid
    4 bids

    Hi im charbel from IETG Group our client GWI want to fix a 360 degree round glass elevator in his project we dont have concrete shaft for the lift we will build a stainless steel structure and fix the lift inside the structure the consultant want from us as elevator supplier to show him how the cabin will look like .kindly check attachment for osaka

    $788 (Avg Bid)
    $788 Avg Bid
    10 bids

    ...printed with a 3D printer. I am looking to design an Arm Cuff and a handle similar to the ones in the picture. The arm cuff exactly the same as the picture, but the handle I wanted design with a locking screw that can be moved back and foth to luck in place based on a person arm length. [login to view URL]

    $163 (Avg Bid)
    $163 Avg Bid
    57 bids

    The data of complex network I have done using python, I need one timer shaft to present the network of a time period or a specific point in time using javascript.

    $183 (Avg Bid)
    $183 Avg Bid
    6 bids

    Define a simple wireframe elevator and vertical 4-floor elevator shaft. Put the elevator in the shaft and make it move from bottom to top, using three.js. Simpler wireframes are better: near-cube with door openings for elevator. Elevator shaft can be simple rectangle, with simple rectangular openings for each floor. Wireframes can be defined in straight

    $263 (Avg Bid)
    $263
    4 entries

    ...curcuit that can connect to a motor and reverse the polarity of the motor via a timer, such that the motor shaft moves clockwise when the polarity is not reversed, and after a specfic time has elapsed, the motor reverses polarity and the shaft moves counter-clockwise. This design is simillar to that of a curcuit in a garage door opener, however, instead

    $153 (Avg Bid)
    $153 Avg Bid
    6 bids

    Define a simple wireframe elevator and vertical 4-floor elevator shaft. Put the elevator in the shaft and make it move from bottom to top, using three.js. Simpler wireframes are better: near-cube with door openings for elevator. Elevator shaft can be simple rectangle, with simple rectangular openings for each floor. Wireframes can be defined in straight

    $260 (Avg Bid)
    $260 Avg Bid
    8 bids

    We have a very specific job. We are designing a product that will have a shaft, fixed at one end (cantilever beam) supporting three loads, each of weights, at specific distances from the fixed end. Our question is what should the diameter of the shaft be, and what material, to ensure a safety factor of three times . Please call Richard Sutz, CEO

    $168 (Avg Bid)
    $168 Avg Bid
    51 bids

    Plan a machine electrical system for mechanical engineering manufacture of moving shafts. 3 motors combined to wind and unwind wide fabric. Machine made fro...mechanical engineering manufacture of moving shafts. 3 motors combined to wind and unwind wide fabric. Machine made from 80x40 Tblock aluminium system with anodised round tube as shaft rollers.

    $1951 (Avg Bid)
    $1951 Avg Bid
    21 bids

    We need an external design of a 3 storey plus a rooftop swimming pool and the underground basement. Each level of the building would have 1 apartment, in total 3 ...for the project, we are looking at both modern and classic options. The from of the house should have the entrance with a spiral staircase going through each level and a lift shaft nearby.

    $252 (Avg Bid)
    $252 Avg Bid
    61 bids

    The app is 95% completed but still need an orbit plot [login to view URL] and some minor modifications completed to the existing app.

    $47 / hr (Avg Bid)
    $47 / hr Avg Bid
    55 bids

    ...[login to view URL] This is a 45Kw 3 Phase brushless motor. The new motor design could be based on several of these motors connected by a single output shaft with ball bearings between them. It could be powered in series so that the each individual motor unit can run on 150-200V while the whole unit can run on up to 1200V. I

    $2780 (Avg Bid)
    $2780 Avg Bid
    13 bids

    I need someone with full knowledge, to design a small 24v electric motor with a double shaft. This submersible water pump with twin blades,( as in rough drawing ). I am looking for life on continues use 24/7 @ 18 mouths +/- 3, needs to pump 3 LPH. Smaller is better but not over reliability, I'm in your hands you tell me.

    $554 (Avg Bid)
    $554 Avg Bid
    24 bids

    ...Current requirements: * DC input 12-24v to be used with a standard wall plug pack * High quality DC brushless motor with very high MTBF * balanced component to fit on motor shaft with neodymium magnets; magnets North/South, counter weights East/West – to avoid vibration and improve longevity of the motor Example of simple PC fan design without balance:

    $318 (Avg Bid)
    $318 Avg Bid
    3 bids

    The shaft is used in industrial plants for grinding purpose. The roller on it performs grinding. Currently shat fails at the neck. We need to perform FEA of shaft with load conditions and develop a proper design of the shaft to avoid failures due to fatigue. Load conditions on shaft and other details will be shared once the project is allotted.

    $387 (Avg Bid)
    $387 Avg Bid
    35 bids

    ...building a webpage and have a customer selling a tailored solution for golf grips. For this solution I want the customer to choose their own picture that will be placed on the shaft with a transparent silicone grip on top. I would like a module written for Wordpress/Woocommerce where customer can upload their own picture and directly see how it will look

    $242 (Avg Bid)
    $242 Avg Bid
    14 bids

    Design a floor pl...1st, 2nd) - Half of the ground floor is for parking purpose. - It is east facing (15 ft front) - 3 Rooms (2 Bedroom, 1 Living Room) - 3.5 ft of balcony can be extended - shaft is to be given for chimney and other plumbing pipes. I AM OPEN TO OTHER IDEAS ALSO. Sample Floor plan is attached below, to tell you how it can be

    $12 (Avg Bid)
    Guaranteed
    $12
    6 entries

    ...prefer this as the time base as they are proven to be very stable timekeepers and readily available. A light weight disk with a single slot mounted on the seconds hand shaft of the Quartz mechanism would trigger a circuit via an opto interruptor. This event would signal the minute ring motor to revolve 1 rotation, thereby advancing the minute ring

    $204 (Avg Bid)
    $204 Avg Bid
    1 bids

    ...create a nice logo. the head of the dog is 1:1 what we want, you have to draw an motorcycle sunglass on his head and create the mouth of the dog new. (with tongue and a gear shaft inside of the mouth). it would be great if you could create a lettering (MIOT Garage) too. Like the example attached (gasmonkeygarage). Please offer us two logos: one without

    $101 (Avg Bid)
    $101 Avg Bid
    78 bids

    ...= 30oF (Room Temp) ○ Reliability should be about 99% ○ Minimum Fatigue FOS (modified goodman) for all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    18 bids

    ...= 30oF (Room Temp) ○ Reliability should be about 99% ○ Minimum Fatigue FOS (modified goodman) for all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750

    $73 (Avg Bid)
    $73 Avg Bid
    14 bids

    ...= 30oF (Room Temp) ○ Reliability should be about 99% ○ Minimum Fatigue FOS (modified goodman) for all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750

    $127 (Avg Bid)
    $127 Avg Bid
    11 bids

    3D model of the crank shaft created using pro e, then the model and perform transient analyses of the crank shaft under moment and rotational velocity loadings. The finite element software ANSYS 14.5 is used for the analyses. • To analyze optimal analysis of crank shaft of various material and under same loading conditions. The results of defo...

    $442 (Avg Bid)
    $442 Avg Bid
    29 bids

    This project is for is for the 3D rendering of 3 components of an air impeller pump; (1) Base-plate (2) Bladed rotating assembly (3) Shaft Air will be flowing under pressure through the shaft for the purpose of turning the blade assembly, as outlined in the attached sketch. The base plate will remain stationary. The files types provided will

    $204 (Avg Bid)
    $204 Avg Bid
    31 bids

    Hello, A mechanism supplies rotational movement to several shaft. I need to create alternative way without cam mechanism.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    18 bids
    Trophy icon Create Logo Ended

    ...**UPDATE** Good stuff here...comments here and on each entry. I like circular over triangle. Use Claude Sans font Don't like arrow heads that are wider than the main arrow shaft...the little points extending outside of circle don't scale down to smaller size versions of logo. Circle should be identifiable in 42x42 as well as 16x16 I like the graphic

    $66 (Avg Bid)
    Guaranteed
    $66
    155 entries

    Require someone to analyse an output shaft and flange design and provide feedback which is as to where they are most likely to fail. Solid model, material and heat treatment specifications will be provided. Parts are in an IRS differential unit, bolted solid into a spool

    $126 (Avg Bid)
    $126 Avg Bid
    10 bids

    ...to design a Mechanically Driven Clamp (MDC) that will be mounted on, and driven by, a separately designed robotic arm. The MDC receives mechanical power (either by a rotary shaft or linear actuator) that it must convert into the desired actions. How it works: Initially, the MDC will be positioned at a Handrail, in a ready-to-clamp orientation. When

    $329 (Avg Bid)
    Featured Urgent Guaranteed Sealed Top Contest
    $329
    18 entries

    ...type drawing. I'll want to change the choice of which pieces are highlighted with color. Next, take the long shaft (currently in blue, long and vertical, on the left side), and make it pop out of the schematic as a more photorealistic 3D shaft. Sort of showing the real part that came from the schematic drawing. Next, I want to incorporate a montage

    $472 (Avg Bid)
    $472 Avg Bid
    39 bids

    ...Want to look younger and especially fresh? Soon it's a wonder brand for the secret of youth. Hair Serum Prevents hair loss! Prevents hair graying. Entering the hair shaft and growing new hair follicles. Dry and damaged hair restoration! Hair restoration after oxidation and color! Scalp treatment, seborrhea and rattling ----------------

    $131 (Avg Bid)
    Guaranteed
    $131
    23 entries
    Trophy icon Redesign Company Logo Ended

    ...changes: *incorporate name 'BG Golf' into logo *make it look more professional/sophisticated *make the design theme related to Golf equipment (particularly components like golf shaft / golf grips) *we sell mostly on eBay/Amazon but would like the logo be easily recognisable so people check out our website company name: 'BG Golf Inc' future website/e-commerce:

    $131 (Avg Bid)
    Guaranteed
    $131
    80 entries

    ...laborers, equipped with tools such as shovels, pickaxes, etc; may be carrying a lantern or torch. Scene Options: 1) an underground cavern with tunnels and light, accessed via shaft above. Carved into the walls are grinning frog-faced statues with fat bellies, like little Lovecraft Buddhas. Optionally, elements of an ancient, buried Greco-Roman city may

    $263 (Avg Bid)
    Guaranteed
    $263
    36 entries

    ...pots it has a south and north pole there are 2 coils of 500 turns on each pot above and below the sipnning wooden magnetics. The firing of the pots is by a rotating crank shaft with a magnetic on a spinning rod which passes by 4 separate Hall effect transistors I have already built the hall effect circuit board and what I need is a circuit board for

    $45 (Avg Bid)
    $45 Avg Bid
    8 bids

    Animation of flexible shaft, we need to describe animation of cleaner under a strap commode member

    $25 (Avg Bid)
    $25 Avg Bid
    29 bids

    ...their “STRENGTH DESIGN” in Scenario A … if we omitted the step-down and step-up Gearing arrangements. In the absence of these Step-down and Step-up arrangements … the motor shaft goes directly into Gear C and causes rotation of both Gears C and D at the much higher 1000 RPM … in turn causing Gear D to output directly into the Crusher at 1000 RPM. In

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    38 bids
    $4580 - $7633
    0 bids

    We are developing a fingerprint pad...which we have created the electronics part but looking for innovative design of the lock. The lock should include a capacitive biometric module, li-ion battery, shackle, motor, shaft and the remaining is up to the imagination of you. The lock should be similar to the size of ordinary locks available in the market.

    $619 (Avg Bid)
    $619 Avg Bid
    16 bids

    Project involves showing in 3D solids a flexible disc with 2 holes bent in the middle and inserted over the shaft end of a hook. Three hook designs and two disc designs.

    $142 (Avg Bid)
    $142 Avg Bid
    101 bids

    there are two walls in our residential lift shaft that we would like to decorate with graffiti art. the walls are 1.4 m wide by 2.4 m high. the lift cabin has glass sides so the art will be visible from inside the lift. remember the viewer will be quite close to the wall when viewing the art. the home is under construction now in Mount Hawthorn Perth

    $1153 (Avg Bid)
    $1153 Avg Bid
    12 bids

    I need a 3D model of something. Hi i have a shaft to be drawn using catia can u help? I have the picture of the shaft. U just need to draw it using catia. Can i email u the picture? P/s : Catia is something like Autocad

    $131 (Avg Bid)
    $131 Avg Bid
    19 bids

    I need a 3D model of something. Hi i have a shaft to be drawn using catia can u help? I have the picture of the shaft. U just need to draw it using catia. Can i email u the picture? P/s : Catia is something like Autocad

    $125 (Avg Bid)
    $125 Avg Bid
    10 bids

    I need a 3D model of something. Hi i have a shaft to be drawn using catia can u help? I have the picture of the shaft. U just need to draw it using catia. Can i email u the picture? P/s : Catia is something like Autocad

    $24 (Avg Bid)
    $24 Avg Bid
    6 bids

    I need some graphic design. Hi i have a shaft to be drawn using catia can u help?

    $110 (Avg Bid)
    $110 Avg Bid
    12 bids

    I need some graphic design. I need to draw a shaft using catia.

    $21 (Avg Bid)
    $21 Avg Bid
    7 bids

    The overall gearbox design should include, load calculations, gear design, shaft design, fastener sizing, bearing selection (and any accompanying components such as seals and clips, etc.) and the design of any other fixtures, housing(s) and/or couplings to ensure a completely operating gearbox. Fastener calculations are required to justify the size

    $474 (Avg Bid)
    $474 Avg Bid
    48 bids

    The overall gearbox design should include, load calculations, gear design, shaft design, fastener sizing, bearing selection (and any accompanying components such as seals and clips, etc.) and the design of any other fixtures, housing(s) and/or couplings to ensure a completely operating gearbox. Fastener calculations are required to justify the size

    $209 (Avg Bid)
    $209 Avg Bid
    8 bids

    ... We are developing a machine which has a rotary table with following dimensions: Diameter : 20 Inch Weight : 10 KG Rotary table will be connected to a servo motor with the shaft in centre of the rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate

    $26 (Avg Bid)
    $26 Avg Bid
    2 bids

    We are developing a machine which has a rotary table with following dimensions: Diameter : 20 Inch Weight : 10 KG Rotary table will be connected to a servo motor with the shaft in centre of the rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate

    $70 (Avg Bid)
    $70 Avg Bid
    30 bids