Schematic design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,000 schematic design jobs found, pricing in CAD

    ...System Design Service with Specific Requirements and Flexible Deadline We are seeking a skilled and experienced RF hardware designer to provide RF system design services for our project. The ideal candidate will have expertise in RF system design and be able to meet our specific requirements. We are looking RF hardware design service and we already have a schematic design but it need some rectifications. Our requirement is to correct schematic and generate the Gerber file . for example You need to fix the transmitters heads and you only need to by or add frequency generator software and a little bit of software that only need for data saving, data control, and radar identification. Specific Requirements: - We have detailed specifi...

    $762 (Avg Bid)
    $762 Avg Bid
    18 bids

    ...the freelancer will then compile these parts as shown in our reference file that begins with the letter 'A'. This involves accurately positioning each part to create a coherent and functional assembly in SolidWorks. **Deliverables:** - The final deliverable will be a SolidWorks file (.sldprt and .sldasm) for each .dwg file provided. - Each file should be a faithful 3D representation of the 2D schematic, adhering to the specified dimensions and standards. - A final assembly file showing the compiled parts in their correct positions and orientations. **Requirements:** - Proven experience in SolidWorks and 3D modeling. - Attention to detail and ability to interpret 2D schematics accurately. - Good communication skills to understand project requirements and provide update...

    $575 (Avg Bid)
    $575 Avg Bid
    76 bids

    PCB Design Project I am looking for a PCB designer who can help me with a simple PCB design project. The design complexity level is simple, and I have a specific size requirement for the PCB. Skills and Experience: - Proficiency in PCB design software - Knowledge of PCB manufacturing processes and standards - Ability to work with specific size requirements - Experience with simple PCB designs 2 sided PCB APPLICATION: Application of the PCB are in an actuator with 2 DOF with two motors,as per image attached. There is a need of two types of PCBs, Encoder PCB Controller PCB PCB specification: Encoder PCB : (Dimension 19 mm x 19 mm) Encoder reads the output rotation of the actuator, and links with other encoders by RS485 protocol. Encoder should be an absolute ...

    $125 (Avg Bid)
    $125 Avg Bid
    19 bids

    ...am transitioning to KiCad software, I am in need of an Electrical Engineer or a PCB designer who can convert my OrCAD schematic files into KiCad schematic files. Here are the specifics of the task at hand: - Complexity Level: You will be dealing with medium complexity circuits. So, a sound understanding and experience in dealing with such circuits is required. - Components: You don't have to worry about dealing with proprietary or obsolete components since all components in the circuits are standard. Ideal candidates for this task would be someone with significant experience in Electrical Engineering or PCB design, specifically familiar with both OrCAD and KiCad schematic files. Proficiency in file conversion and a meticulous approach to maintain circ...

    $112 (Avg Bid)
    $112 Avg Bid
    16 bids

    Project Overview: Design a PCB for a heater control system with integrated sensors. Develop software libraries compatible with Arduino UNO R3 for efficient sensor operation and implement a functional program to control the 3kW triac heater circuit. Project Components: PCB Design: Mounting for MAX6675 breakout board. Provision for external DHT22 sensor cables. Integration of MPXV4115VC6U Vacuum sensor. Space allocation for rainbow jumper cables connecting to Arduino Uno R3. Incorporation of 3kW triac-controlled heater circuit, referencing: Heater Control Circuit Video. Parts Selection: Identify and select appropriate components for the PCB design. Specify part numbers, manufacturers, and any crucial spec...

    $459 (Avg Bid)
    $459 Avg Bid
    57 bids

    I require a skilled professional who can effectively turn my panel design into a Solidworks Electrical Schematic. The initial panel and its components have been generated in Solidworks, while the electrical wire diagram is in Visio. You need to be proficient in both these softwares to complete this task. Key requirements of the task at hand include: * Conversion of Wiring - The diagram that was created in Visio needs to be converted into Solidworks Electrical Schematics format. * Standard Symbols - While the Visio diagram includes custom symbols and elements, these must be converted into standard symbols in the Solidworks Electrical Schematics as per my specifications. * Library Development in Solidworks Schematics Electrical- as the panel is migrated into Solidworks E...

    $721 (Avg Bid)
    $721 Avg Bid
    21 bids

    I am looking to get a PDF file made from a picture of a blueprint. Some specifics of this project include: - The new PDF should exactly replicate the blueprint. This means every detail is essential and cannot be overlooked or misinterpreted. - The level of detail expected is high, with all elements visible and clearly defined. - I will require a final p...every detail is essential and cannot be overlooked or misinterpreted. - The level of detail expected is high, with all elements visible and clearly defined. - I will require a final product in PDF format. Anything other than this will not be accepted. The ideal freelancer for this job would possess, most significantly, attention to detail. Also, having experience in graphic design, specifically in blueprint or schematic...

    $68 (Avg Bid)
    Urgent Guaranteed
    $68
    51 entries

    ...trimmer will allow setting the dead-band between forward and reverse drive triggers from 1% to 10% to compensate for noisy analog input signals. 5. The analog input section is protected against AC signals and overvoltage to prevent damage from incorrect field connections. A Pico-fuse is acceptable in this case. 6. The circuit is powered by 24vdc. 7. Deliverables: a) Altium 365-based schematic utilizing US-sourced components. b) Altium generated bill of materials. c) PCB layout not required Ideal skills and qualifications: - Experience with control systems engineering - Proficiency in designing with discrete components - Understanding of forward/reverse operation principles - Proficiency in working with Active High mechanisms at 5V. Your role will be critic...

    $207 (Avg Bid)
    NDA
    $207 Avg Bid
    6 bids

    ...project concentrates primarily on highway Intelligent Transport Systems infrastructure including highway and city traffic representations and electrical engineering requirements, thus your expertise should align with this field. Key responsibilities include: - Developing schematic diagrams that provide a high-level overview of electrical engineering concepts - Preparing clear and concise flow diagrams that depict the project process The ideal candidate should possess: - Extensive expertise in technical graphic design - Previous experience in creating content for engineering proposals, specifically electrical engineering - Familiarity with the concepts and components of mobility automation and transportation systems - Ability to synthesise complex information into easy-...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    40 bids

    ...objectives, and the methodologies employed. Theoretical Part (3 pages): Summarize international scientific articles on business process management and improvement, concluding with key insights. Company Activity Overview and Research Methodology: Provide a concise overview of the company's operations and the methodologies used for the study. Processes 1-10: Each process section (3-10) includes a schematic overview, problem identification, improved process characteristics, cost implications, and an assessment of potential benefits. Processes 6-8: Involve computer simulations using programs like "JAAMSIM" and "AnyLogic" to demonstrate process improvements in a virtual environment. Process 10: Focuses on supply chain improvement using the "ASDN"...

    $535 (Avg Bid)
    $535 Avg Bid
    52 bids

    I'm seeking an experienced electrical engineer to design an electronic schematic similar to a Gotenna's design. Here's what precisely I am searching for: - The device should primarily function as a communication device. - It should have the capabilities to transmit data at 5 watts over either VHF or UHF. - Users should enter the frequency manually in my app. - The device should connect easily using Bluetooth to an app I am writing for Android and IOS. - This device will need to be battery powered and small so it can be carried by a person on a hike and have a long battery life with weight also in mind. - The device needs to use a mesh network technology to communicate for a few

    $772 (Avg Bid)
    $772 Avg Bid
    28 bids

    I am in urgent need of a skilled electrical engineer to create a detailed electrical drawing for an industrial facility project. Unfortunately, the specific type of diagram needed was not defined but ideally, the freelancer should have proficiency in creating Wiring diagrams, Circuit diagrams, and Schematic diagrams. Ideal skillset should include: - Extensive experience in creating electrical drawings for various complex systems, preferably in an industrial setting. In your application, please include: - Your relevant experience in this field. Looking forward to receiving knowledgeable and experienced proposals. Let's electrify this project together!

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    23 bids

    I need a small digital circuit, should not take long for someone who knows their stuff. I work in PCB design but I am not yet so good at circuit design. So I just need a schematic making. I am looking for a laser diode controller circuit. The diode is high power for engraving wood, I am looking at using the Nichia NUBM44 but open to other suggestions. Will obviously also use a heatsink +fan for cooling. The circuit should consist of three inputs, +VCC, GND and the PWM signal. pick your own values for source voltage and input signal but try to stick to standard numbers. I basically just need the diode to be controlled by the PWM signal, that's not hard to do with an NPN transistor and a current limiting resistor. Though I would also like something to make sure t...

    $26 (Avg Bid)
    $26 Avg Bid
    2 bids

    ...logos. Requirements: - Create a logo that represents my business brand effectively - Use colors that are visually appealing and align with my business theme. I am interested in having it look like a schematic. Something an engineer would draft up to show what the finished product can look like. - Provide multiple logo design options for me to choose from - Deliver high-quality and professional logo files that can be used across various platforms Skills and Experience: - Strong graphic design skills - Proficiency in Adobe Photoshop and Illustrator - Understanding of branding and logo design principles - Ability to work collaboratively and take feedback to make necessary revisions If you have a portfolio of previous logo designs and a creative mindset, I...

    $451 (Avg Bid)
    $451 Avg Bid
    212 bids
    Trophy icon Logo Design Ended

    ...colors and design elements in mind for the logo, which should convey a professional and modern vibe. The logo should also incorporate the following: 1) earth elements and convey a sense of calm, relaxation, and wellness. Please see color schematic file attached 2) The name of the company, Sylvan Waters Wellness. Sylvan means 'Forest' in latin. Waters should portray a sense of healing, presense, stillness, calm and healing. Please see the attached photos. 3) Font desired in name should be a combination of cursive and basic print. I prefer cursive font in Sylvan Waters (like, water flowing) and a professional print for 'Wellness' 3) The design should mimic in some way the photo of the river flowing through the forest. Ideal Skills and Experi...

    $136 (Avg Bid)
    Featured Guaranteed
    $136
    795 entries

    Schematic + PCB as discussed and agreed on

    $447 (Avg Bid)
    $447 Avg Bid
    1 bids

    As an individual in need of schematic and PCB design, I am flexible about the software to be used. The right applicant must be adept at creating moderately complex designs, such as integrated systems comparable to a motherboard. I'm interested solely in detailed project proposals that specify how you will carry out this task, such as the tools, process, and timeline you will use. Expectations and Requirements: - Ability to handle moderate complexity designs - Proficiency in Altium Designer, Eagle, KiCad, or comparable software - Detailed project proposal revealing your intended action plan.

    $607 (Avg Bid)
    $607 Avg Bid
    59 bids

    I am looking for a skilled designer who can create a detailed schematic drawing of an electrical panel for my patent submission. The drawing should be in a technical/blueprint style, showcasing the specific features that I have in mind. Skills and experience needed for this project: - Strong understanding of electrical panel design and schematics - Proficiency in creating detailed technical drawings in a blueprint style - Attention to detail and accuracy in representing the specific features required This project requires someone who can effectively translate my ideas into a visually appealing and professional schematic drawing. If you have experience in patent submissions or working with electrical panels, that would be a plus.

    $522 (Avg Bid)
    $522 Avg Bid
    57 bids

    I need to create a PCB design for a servo tester that will be used to control an Electronic Speed Controller (ESC). The final design should be provided in the Gerber Files format. This project includes several key elements: 1. **PCB Layout with Dimensions**: A detailed drawing of the PCB layout, including precise measurements. 2. **Linear Resistor Integration**: The PCB design will incorporate a specific linear resistor. I will need the product's URL and its datasheet to accurately embed it into the PCB's footprint. 3. **Example Servo Tester Schematic**: I will use a servo tester schematic as a reference for arranging the electronic components on the PCB. Please make sure all components resistors and capacitors are fit with 9610R3.4KL2.0. Provi...

    $102 (Avg Bid)
    $102 Avg Bid
    8 bids

    I am looking for an experienced Arduino developer to help me with a project that involves code development for an Arduino R3. The specific functionality that I need the Arduino to perform includes generating a modulated square wave and designing a charge controller for lithium batteries. Requirements: - Proficiency in Arduino programming - Strong knowledge of circuit design and schematic creation - Experience with generating modulated square waves - Familiarity with designing charge controllers for lithium batteries Timeline: - The project needs to be completed within 1-2 weeks. If you have the necessary skills and experience for this project, please submit your proposal. Thank you!

    $683 (Avg Bid)
    $683 Avg Bid
    40 bids

    I require a PCB designer who is experienced in working with four-layer PCB designs. who can design on Altium software. We already have a PCB that needs to be reversed. we need the Schematic and Garber files of this PCB Timeframe: The expected timeframe for completing the PCB design is 1-2 weeks. I have 2-3 more projects coming soon so give me your best work & price.

    $156 (Avg Bid)
    $156 Avg Bid
    13 bids

    I need a skilled PCB designer for my project. Currently I have a working prototype model. I want to make that working model into a completed PCB product. The freelancer should deliver the following: 1) Schematic file 2) Gerber File 3) BOM file 4) Pick and Place file The time is very short. So I want a highly talented PCB designer to complete the work fast as well as effective.

    $38 (Avg Bid)
    $38 Avg Bid
    3 bids

    I am looking for an experienced PCB designer to create a simple PCB layout for my project. The ideal candidate should have knowledge and experience in designing PCBs with a simple complexity level. Key ...simple PCB layout for my project. The ideal candidate should have knowledge and experience in designing PCBs with a simple complexity level. Key Requirements: - Ability to create a complete PCB layout, including the schematic design - Familiarity with standard PCB dimensions and specifications - Proficiency in using PCB design software (e.g., Altium Designer, Eagle) - Attention to detail and ability to ensure proper functionality and reliability of the PCB design If you have the necessary skills and experience, please submit your proposal with examples of...

    $581 (Avg Bid)
    $581 Avg Bid
    74 bids

    We have developed a PCB design schematic for a wearable health monitoring device, integrating sensors, li-ion battery, and other electronic components from reputable suppliers such as Analog Devices, Maxim Integrated Sensor, Panasonic, TDK, Samsung, Macronix, etc. However, the cost estimate for the components, as provided by our current freelance designer, significantly exceeds our proposed budget. The variance is more than three times our allocated budget for this project. Our current designer is actively working on finding cost-effective alternatives for the components to align with our budget constraints, but progress has been slower than anticipated. Therefore, we are seeking to hire a new freelancer with expertise in the electronics market to expedite this process. Req...

    $369 (Avg Bid)
    $369 Avg Bid
    12 bids

    I am looking for an experienced illustrator who specializes in technical/schematic line drawings. I have exact images that need to be used as a reference for the illustrations. Requirements: - Expertise in creating technical/schematic line drawings - Ability to accurately depict medical concepts and objects - Proficiency in Adobe Illustrator or similar software - Attention to detail and ability to meet deadlines The project entails creating 1-5 illustrations, which will be provided in the form of exact images. The illustrations should be clear, concise, and visually appealing. The ideal candidate will have experience in medical illustration and a strong portfolio showcasing their technical/schematic line drawing skills.

    $31 (Avg Bid)
    $31 Avg Bid
    21 bids

    No building on your part is needed. Only schematic and parts specification. This is a one-off build for me using point-to-point soldering or a soldered breadboard. Power supplied via 3V coin battery. When power is applied Output1 goes high, then after 1-2 seconds, Output2 goes high. Both outputs share a common ground. At 70 degrees Fahrenheit Output1 goes low. At 67 degrees Output1 goes high, then Output2 goes high. Low/high cycle repeats until power is disconnected. Very low amperage. Temperatures need not be exact, just close.

    $38 (Avg Bid)
    $38 Avg Bid
    6 bids

    ...experienced PCB designer to create a schematic and design based on the latest Pixhawk reference design. The project requires the following: Also - need to discuss and take inspiration for similar products designed to the same pixhawk standard from Other manufacturers where the designs have been open sourced. Desired PCB Size: - Small form factor Component Population: - The PCB needs to be populated with components Connectors and Interfaces: - Specific requirements for connectors and interfaces on the PCB - also needs one of the components to be interfaced with a flexi cable in its own thermally insulated and heated compartment for vibration isolation (gyroscope and baroscope) Ideal Skills and Experience: - Proficiency in PCB design and ...

    $539 (Avg Bid)
    NDA
    $539 Avg Bid
    10 bids

    ...with a simple schematic Eagle to Altium (19) conversion and re-layout project. The details of the project are as follows: Size of the schematic: Small (less than 25 components) - The schematic that needs to be converted and re-laid out is relatively small, with less than 50 components. A title block needs to be added with part number and part title Specific requirements for the re-layout: Only basic requirements - Board size 1.1" x 2.1" - I have only basic requirements for the re-layout and I trust the freelancer's judgement in ensuring a clean and efficient layout. Preferred timeline for the project: Normal (4-7 days) - I am looking for a freelancer who can complete the project within a normal timeframe of 4-7 days. Ideal Skills and Experience:...

    $524 (Avg Bid)
    $524 Avg Bid
    43 bids

    need a code for following application: - It should produce 2 pairs of pwm signal between 20 -40 khz. - Innitial duty cycle should fixed at %40. But, after my tests I may need to change it to another value. So duty cycle should be easily changable in the code. And it should not affect the working princible. - 2 pairs will produce different freqs at a time. They should not be same at the s...around 150 steps. - The whole cycle will be completed in 16 seconds. After 16 seconds whole sequence will star over and so on. - It will feed by 12 volts battery system. If the battery voltage drops below 11.5 volts it should stop producing signals and should give a low battery alarm. When the battery voltage reaches to 13 volts it should start again. - Should work on PIC16F88. I have the circuit sche...

    $187 (Avg Bid)
    $187 Avg Bid
    27 bids

    I am in need of someone who can generate circuit diagrams for the OKUMA BL-D75A and Okuma E4809-770-015-D servo card. There are no specific electrical standards or regulations that need to be followed, and I would like the project to be completed as soon as possible. Ideal Skills and Experience: - Experience in creating circuit diagrams - Knowledge of electrical components and layouts ...generate circuit diagrams for the OKUMA BL-D75A and Okuma E4809-770-015-D servo card. There are no specific electrical standards or regulations that need to be followed, and I would like the project to be completed as soon as possible. Ideal Skills and Experience: - Experience in creating circuit diagrams - Knowledge of electrical components and layouts - Attention to detail and accuracy in schematic...

    $20 (Avg Bid)
    $20 Avg Bid
    2 bids

    RFID Reader Design a RFID Reader circuit for the PN532. Support I2C @ 3.3V. The antenna size should be 12 x 12 cm. I am in need of an experienced Electronic engineer who can develop an RFID reader that utilises the PN532 chip. Experience with the PN532 is preferred. Experience with designing RFID antennas is required. Please also explain your design, particularly how the proper capacitance is achieved. - Purpose: The primary function of this RFID reader is to identify object presence. The objects in this case are "custom devices". Sensitivity and accuracy are therefore paramount. - Design Requirements: The reader must integrate a 12 x 12 cm antenna to fit within the confined space of the unit. The core of this project is the implementation of the PN532 ch...

    $2256 (Avg Bid)
    $2256 Avg Bid
    26 bids

    This is for schematic design . And move further after that

    $610 (Avg Bid)
    $610 Avg Bid
    1 bids

    I am looking for a freelancer who can convert my KiCad project files to Eagle. Requirements: - Experience with KiCad and Eagle software - Ability to accurately convert schematic and PCB files - Attention to detail to ensure all components and connections are properly transferred Specifics: - I already have the KiCad project files ready - The deadline for this project is 2 days - There is only 1 schematic and PCB file that needs to be converted - The circuit is very simple with very few components If you have the necessary skills and can meet the deadline, please submit your proposal.

    $13 (Avg Bid)
    $13 Avg Bid
    3 bids

    This project involves the design and implementation of a motion controller for a DC motor, incorporating precise speed control through Pulse Width Modulation (PWM) and real-time feedback using an encoder. The system utilizes an AVR microcontroller (ATMega328p) and involves programming in the C language within the ATMEL Studio 7.0 development environment. 1. **PWM Speed Control**: The heart of the system lies in its ability to regulate the speed of a DC motor through PWM. The PWM parameters can be configured and controlled, providing flexibility in adjusting the motor speed. 2. **Encoder Feedback**: To ensure accurate speed measurement, an encoder is integrated into the system. This feedback loop allows the controller to continuously monitor the motor speed 3. **USART Communicat...

    $451 (Avg Bid)
    $451 Avg Bid
    26 bids

    ...drone flight controller system useful for applications as mentioned below 1) Racing FC – Ready to fly without any custom drone setup 2) Videography FC – Ready to fly with some selective custom drone setup possibilities 3) Commercial FC having advanced features – Ready to fly with comprehensive custom drone setup possibilities We aim to design one board first and then create two versions of the same board platform by upgrading it through required design modifications. We aim to get some common features across these platforms as below 1) Plug and play installation without creating a wiring mess. 2) AI and ML support, third party apps via API, cloud connectivity, if and wherever applicable 3) Backward integration if and wherever applicable 4) Compatible ...

    $2716 (Avg Bid)
    $2716 Avg Bid
    14 bids

    ...qualified PCB designer to handle a product development project of intermediate complexity. Your tasks will include schematic design, producing gerber files, and creating the Bill of Materials (BOM). The design should incorporate the following: - Use of both Through-Hole components and Surface Mount Devices - An appropriate layout that allows for optimal performance Skills and Experience: - Proven experience in PCB design - Proficient in schematic design - Familiarity with the production of gerber files - Understanding of BOM creation - Experience with both Through-Hole components and Surface Mount Devices This project is all about product development and I'm counting on your PCB design expertise to bring this product to life. Your...

    $168 (Avg Bid)
    $168 Avg Bid
    13 bids

    ...qualified PCB designer to handle a product development project of intermediate complexity. Your tasks will include schematic design, producing gerber files, and creating the Bill of Materials (BOM). The design should incorporate the following: - Use of both Through-Hole components and Surface Mount Devices - An appropriate layout that allows for optimal performance Skills and Experience: - Proven experience in PCB design - Proficient in schematic design - Familiarity with the production of gerber files - Understanding of BOM creation - Experience with both Through-Hole components and Surface Mount Devices This project is all about product development and I'm counting on your PCB design expertise to bring this product to life. Y...

    $218 (Avg Bid)
    $218 Avg Bid
    6 bids

    Hi. I am working on a DC /DC power converter and I am looking for a power pcb routing expert . I will give the schematics files and all nformations needed . I need somebody that have experience in power PCB routing on Kicad. The person need to be aware of the mains routing rules ( sm...I need somebody that have experience in power PCB routing on Kicad. The person need to be aware of the mains routing rules ( smallest path between two pad , respect isolation distances between routes , connecters at the edges , decoupling capacitors near components , EMC rules , etc ... ). The board is not very complex . ( 4 to 6 layers). Some minors correction could need to be done on the schematic . I will give implantation file and an exemple of complete board very close to this one Wich is alr...

    $197 (Avg Bid)
    $197 Avg Bid
    35 bids

    ...with the schematic design of my project. Project: Connecting 4 SD card readers via USB Hub controller The goal of the project is to connect 4 SD card readers, using Genesys chips, to 7 SD 4.0 cards via a USB Hub controller. All the necessary components and libraries have already been prepared and will be delivered to you for the implementation of the project. It is your responsibility to create the schematic design, following the instructions in the attached datasheet. GL3231S, GL3232S ,GL3523-OTY30. The task includes the research and connection of the mentioned components in order to realize their full potential and achieve a satisfactory data transfer speed, which is intended for these devices. It is especially important to adhere to the datasheet and ens...

    $31 (Avg Bid)
    $31 Avg Bid
    4 bids

    I am looking for a freelancer who can design and build a Variable DC Voltage and Current Output based AC DC SMPS through POT CC & CV mode. The input will be 230V, 50Hz AC supply. there will be two different 10K POT to adjust output voltage 0-60V and current 0-100A independently. The project requires the following: Desired Output Voltage Range: - The desired range of output voltage should be 0-60V. Desired Output Current Range: - The desired range of output current should be 0-100A. Required Power Rating: - The SMPS should have a power rating of 6000W. Ideal Skills and Experience: - Strong knowledge and experience in designing of Embedded system and power electronics and building AC DC SMPS systems. - Proficiency in working with POT controlled constant current (CC) & Co...

    $1757 (Avg Bid)
    $1757 Avg Bid
    14 bids

    I am looking for a skilled AutoCAD drafter to assist me with creating a piping layout in AutoCAD. The purpose of this project is to create a basic schematic representation of the piping system. Ideal Skills and Experience: - Proficient in AutoCAD - Knowledge of plumbing systems - Ability to accurately draft schematic representations Please note that this project does not require detailed design with dimensions or a 3D model with all components. The scale of the piping layout will be determined later. If you have experience in drafting piping layouts and are familiar with AutoCAD, please contact me to discuss further details.

    $53 (Avg Bid)
    $53 Avg Bid
    10 bids

    I am looking for a PCB designer who specializes in single layer and double layer PCB design for consumer electronics. The freelancer will need to create a schematic as there is currently none available. The ideal candidate should have experience in designing PCBs for consumer electronics and be familiar with the specific requirements and considerations for this type of application.

    $130 (Avg Bid)
    $130 Avg Bid
    13 bids

    ...in need of an experienced electrical schematic designer for an industrial project with a tight deadline. The ideal candidate should have the following skills and experience: - Proficient in using Skycad for creating detailed industrial electrical schematics - Strong knowledge of industrial electrical systems and components - Ability to work quickly and efficiently to meet the 1-2 week deadline - Experience with designing schematics for complex industrial systems - Excellent communication skills to understand and incorporate my specific component requirements If you have the necessary skills and experience, please submit your proposal along with examples of your previous industrial electrical schematic work. Project is to provide an electrical schematic for a smal...

    $73 (Avg Bid)
    $73 Avg Bid
    8 bids

    I am looking for a freelancer who can create detailed electrical schematics in CAD for my existing business. The ideal candidate should have experience in creating schematics with component specifications. The CAD files should be compatible with AutoCAD. This project requires a high level of attention to detail and accuracy. A hand drawn schematic will be provided, complete with a sample CAD title block for reference.

    $377 (Avg Bid)
    $377 Avg Bid
    68 bids

    Need a Schematic for Front Panel Switches with LEDs for ARM625 Overview: I am seeking a skilled freelancer to design and implement front panel schematics for switches with green LEDs for the ARM625. The project is intended for industrial use and requires standard functionality for the switches. Requirements: - Design the schematic for panel switches with green LEDs for the ARM625 - 100 Switches with 100 LEDs - Ensure standard functionality for the switches - The project is for industrial use Ideal Skills and Experience: - Experience in schematic design for embedded processors - Understanding of industrial requirements and standards - Proficiency in circuit design. - Send Examples of similar past work. If you have the necessary skills and...

    $604 (Avg Bid)
    $604 Avg Bid
    31 bids

    I have schematic of FMC board LPC (low pin count) .. it is simple board just view connector, power supply and buffers/level shifter. the footprints of components are already created. I need only some to work on the PCB layout.

    $150 (Avg Bid)
    $150 Avg Bid
    17 bids

    Looking for an Engineer - who has designed the battery management system using high-side mosfet control - preferably with experience of designing using TI chip - max current support 100A, 60V We will be sharing the schematic for the PCB design. We are looking for PCB Layout design based on the schematic shared by us. Candidates with prior experience experience in BMS design are encouraged to apply. Note: - Please mention your prior experience or work/design circuit around BMS - If you have read the requirement, send your proposal starting with BMS Design Proposal as the title..

    $419 (Avg Bid)
    $419 Avg Bid
    18 bids

    I am looking for a skilled PCB designer to create a circuit diagram for a final product. The purpose of the PCB is to serve as a prototype. Additionally, I would like the freelancer to source the components for the PCB. Ideal skills and experience for this job include: - Proficiency in PCB design and layout - Knowledge of circuit design and schematic creation - Ability to source components and ensure their compatibility with the PCB design - Attention to detail and ability to meet project deadlines

    $22 (Avg Bid)
    $22 Avg Bid
    13 bids

    ...freelancer to design and build an induction heater circuit for industrial use. The circuit should have a power output of 40000W and be capable of heating metal objects. Skills and Experience: - Strong knowledge and experience in induction heating circuit design - Proficiency in electrical engineering and circuit design - Familiarity with high power electronics and safety precautions - Ability to select and integrate appropriate components for optimal performance - Prior experience in designing circuits for industrial applications would be advantageous Please provide examples of previous projects or relevant experience in your proposal. The selected freelancer will be responsible for the complete design and implementation of the induction heater circuit, in...

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    5 bids

    I am looking for a skilled freelancer who can design a high frequency generation schematic 40kHz for a commercial product. The requirements for the project are as follows: Frequency Range: - The high frequency generation should be capable of 40 kHz and 300W output power. Intended Use: - The high frequency generation will be used for a commercial product, so it needs to be designed with reliability and efficiency in mind. Component and Technology Specifications: - The generator should be able to programmable and adjust the output in real-time. Ideal, a microcontroller for generating SPWM. Skills and Experience: - The ideal freelancer for this project will have experience in designing high frequency generation schematics. - They should be knowledgeable about the various com...

    $1354 (Avg Bid)
    $1354 Avg Bid
    6 bids