Pwm controller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    3,609 pwm controller jobs found, pricing in CAD
    micro controller 5 days left

    i' like someone to build a micro controller that has ESC with pedal assist sensor , Bluetooth 4.0, GPS.

    $1377 (Avg Bid)
    $1377 Avg Bid
    25 bids

    I need to get done a PID temp Controller with following specification 1 Sensors used Thermocouple J,K,E, PT100 etc 2 Micro 8051 Family 3 Output Electro magnetic Relay 4 Display 1 Set Value seven segment LED, 2 . PV seven segment LED 5 SETTings 3/4 keys P/B on front panel

    $244 - $732
    $244 - $732
    0 bids
    EMBEDDED DEMO PROGRAM 4 days left
    VERIFIED

    ...strong skill sets that can code on the Raspberry Pi 3 and PINE ROCK64 platforms. Must have experience with H.264 video streaming, WiFi, Bluetooth, PZT Pelco protocol, GPIO, PWM servo control, gimbal servo control and remote software control. Project needs completed quickly. Rock64 Board [login to view URL] Raspberry Pi 3 https://www

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    11 bids

    Hi, I am looking for a highly experienced Embedded systems engin...CAN-bus protocol. We are fetching information from the battery (24 cells of each 4 volts), sevcon motor-driving controller, and EVCC (charger controller). We have completed fetching CAN data from the battery and need data from the sevcon controller. I need you to work on this firmware.

    $847 (Avg Bid)
    $847 Avg Bid
    14 bids

    Design a controller which will drive induction motor (100 kw) off Battery bank with frequency up to 300 hz. The required voltage is 400 V, 300 hz. You are free to design Battery / Cell arrangement to get required output and also the type of battery use e.g. li-on or polymer or something better...

    $148 (Avg Bid)
    $148 Avg Bid
    8 bids

    ...is available on board )ltc2308 is the adc which is available on fpga a board 2. realization of PID controller on FPGA 3. realization of process module on fpga (simple equation as to be realized here i.e PT1 transfer function) 4. output of pid controller should be read on DAC (pmod DA4) [login to view URL] what is important is timing analysis ....for example how much

    $322 (Avg Bid)
    $322 Avg Bid
    4 bids

    ...is available on board )ltc2308 is the adc which is available on fpga a board 2. realization of PID controller on FPGA 3. realization of process module on fpga (simple equation as to be realized here i.e PT1 transfer function) 4. output of pid controller should be read on DAC (pmod DA4) [login to view URL] what is important is timing analysis ....for example how much

    $115 / hr (Avg Bid)
    $115 / hr Avg Bid
    2 bids

    ...m/imx28-fb/pwm-backlight.0/backlight/pwm-backlight.0/brightness". Since writing the application, the screen has been replaced and the kernel upgraded, so the new path does not match the path used by the application. The application cannot be updated, so i need a dummy device driver to create the path "/sys/devices/platform/imx28-fb/pwm-backlight.0

    $209 (Avg Bid)
    $209 Avg Bid
    14 bids

    ...can control max 4 pc pwm fans based on 2 1-wire temperature sensors. (both on an single input). Functional: When temperature sensor 1 (input 1) is lower then sensor 2 (input 2) the pwm output is 0. When the temperature sensor 1 is with an small different higher then sensor 2 the pwm output is 5% and when sensor 1 is high the pwm output is 100%. And

    $190 (Avg Bid)
    $190 Avg Bid
    13 bids

    I need an expert on Arduino. I need the microcontroller to calculate the distance between two coordinates chosen from 1 gps local and another remote. and display the distance in a Display. More details to be provided to preferred freelancer

    $45 (Avg Bid)
    $45 Avg Bid
    30 bids

    need a coder HTTP Controller will be coded with C++ with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details can be sent if you are able to do this.

    $1079 (Avg Bid)
    $1079 Avg Bid
    13 bids

    Arduino AVR with PWM control for heater, including additional GPIO input for sensors and output control of valve.

    $166 (Avg Bid)
    $166 Avg Bid
    4 bids

    We have a small communications site business and one is generator powered. We have a script that uses an alarm system to start and transfer generators.. it needs to be re-built and made cleaner.

    $1514 (Avg Bid)
    $1514 Avg Bid
    12 bids

    Mam napisany program pod DUE, na wejściach/ wyjściach klawiaturka 4 przyciski, przekaźniki, sterowanie PWM do inwertera, wyświetlacz 20x4 przez konwerter HD, czujnik ciśnienia, czujniki temperatury/wilgotności. Program jest w dwóch wariantach- średnio zaawansowanym i niemal ukończonym. W pierwszym wariancie wyświetlacz działa, w drugim- pokazuje komunikat

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    5 bids

    ...is available on board )ltc2308 is the adc which is available on fpga a board 2. realization of PID controller on FPGA 3. realization of process module on fpga (simple equation as to be realized here i.e PT1 transfer function) 4. output of pid controller should be read on DAC (pmod DA4) [login to view URL] what is important is timing analysis ....for example how much

    $162 (Avg Bid)
    $162 Avg Bid
    11 bids

    Read Carefully before bidding !!!!!! Only Expert CPP just bid , if you are not expert on CPP don't bid please or your bid will be ignored. need a coder HTTP Controller will be coded with C++/Cwith PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel

    $3017 (Avg Bid)
    $3017 Avg Bid
    10 bids

    hi, need a coder HTTP Controller will be coded with C++/Cwith PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file. Requirements: have experience with this: obfuscation Watchdog techniques Code injection. Direct memory write

    $1513 (Avg Bid)
    $1513 Avg Bid
    10 bids

    ...link for the LED https://www.amazon.co.uk/gp/product/B01DBZK64K/ref=ox_sc_act_title_2?smid=A29VZUSG1WM39I&psc=1 I've uploaded an image of the original Chinese flood light controller, but dont want to use the IR remote. Must be via a single N/O switch. I want to control the colour by pressing a N/O switch. Each time it's pressed, it changes to the next

    $214 (Avg Bid)
    $214 Avg Bid
    27 bids

    ...whole source code but no real sample. We will do the test here. Part of the code right now: static void motor_on (void) { [login to view URL] = MOTOR_PIN_bm; } /*! brief PWM on/off time (milliseconds) */ #define MOTOR_PWM_MS 20 /*! brief Initial on-time (milliseconds) */ #define MOTOR_START_HALF_MS 40 /*! brief Timeout

    $804 (Avg Bid)
    $804 Avg Bid
    11 bids

    I need an MPPT solar charge controller with menu options to set parameters and setup. With good efficient.

    $427 (Avg Bid)
    $427 Avg Bid
    14 bids

    ~~Please Read Carefully before bidding ~~~~~~ -If you don't have expert experience with CPP or C don't bid. need a coder to code HTTP Controller will be coded with any of low-level language suck (CPP, C, Assembly(inline or pure)with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will

    $730 (Avg Bid)
    $730 Avg Bid
    6 bids

    ...experience with CPP or C don't bid. -If you are willing asking for pre-payment or release of milestone before doing the job you will be reported! need a coder to code HTTP Controller will be coded with any of low-level language suck (CPP, C, Assembly(inline or pure)with PHP admin panel to control the client's machines. it should work from Windows XP to

    $1381 (Avg Bid)
    $1381 Avg Bid
    4 bids

    ...with its speed controller in simulink -Fractional order PID controller will be used (5 parameters Kp Ki Kd, mu, lamda) -motor power is 10kw -Time taken from speed input to steady state under 25% 50% 75% 100% load conditions is the output of interest -A 2-3 pages report commenting the results and comparing them with simple PID controller(lamda=0' mu=0)

    $201 (Avg Bid)
    $201 Avg Bid
    20 bids

    I need someone to write a sketch for Arduino with a PID controller. I already have a code for for running the motors with a PWM percentage and also read and display the rotation speed. Just need to enter the PID control in my code.

    $281 (Avg Bid)
    $281 Avg Bid
    11 bids

    hi, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    $1718 (Avg Bid)
    $1718 Avg Bid
    13 bids

    I require the electrical/schematic drawings and the PCB footprint drawings (using KiCad, Eagle or similar) in addition to the Gerber file or equivalent. I will provide more details for those interested.

    $152 (Avg Bid)
    $152 Avg Bid
    41 bids

    hi, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    $939 (Avg Bid)
    $939 Avg Bid
    10 bids

    hello, need a coder HTTP Controller will be coded with C++/C with asm(optional) with PHP admin panel to control the client's machines. it should work from Windows XP to Windows 10 x64. More details will be sent via text file about the panel and the executable file.

    $647 (Avg Bid)
    $647 Avg Bid
    15 bids

    PCB for TEC controller: The purpose is to heat/cool a fluid vessel using a bipolar TEC element. Primarily 1 TEC element will be used, but an additional (future spare) element is required. That is 2 TEC elements are to be controlled, but primarily 1 will be used. The temperature reference will be user defined and sent through WiFi. A MC should control

    $150 (Avg Bid)
    $150 Avg Bid
    8 bids

    YES I WOULD LIKE TO BUILD A CUSTOM CONTROLLER TO INTEGRATE DIFFERENT VENDORS OF SMART HOME HOME DEVICES ON A CENTRAL CONTROLLER SUCH AS INSTEON, SONOFF, NEST, MYQ ETC

    $1630 (Avg Bid)
    $1630 Avg Bid
    28 bids

    I have a esp32 micro that I need some changes to, many it has to do with some port pin and pwm routines.

    $188 (Avg Bid)
    $188 Avg Bid
    21 bids

    1. BCM60500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. PWM Linear hybrid independent, isolated power supplies for DAC, CPU and additional 2x 14v 2.5A output for Amp 6. i2c Auth Chip 7. 44.1 khz sampling freq for Audio Note: I have C code ready for porting.

    $142 (Avg Bid)
    $142 Avg Bid
    2 bids

    Μια γεννήτρια παλμών με PWM για έλεγχο servo Για τον έλεγχο του servo πρέπει να παράγουμε &mu...

    $53 (Avg Bid)
    $53 Avg Bid
    1 bids

    I want to build STM8S103 8bit Microcontroller based digital fan dimmer or Regulator I have complete hardware setup which only needs software to run the project. Requir...the speed we set. 3- IR remote is also attached to the hardware so I need to control the speed of Fan+ON/OFF function 4- some additional function like power supply feedback PWM signal

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    25 bids

    I want code to interface EM406 GPS with LPC2368 microcontroller to collect all GPS data like coordinates etc.

    $152 (Avg Bid)
    $152 Avg Bid
    6 bids

    1. QCA7500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. PWM Linear hybrid independent, isolated power supplies for DAC, CPU and additional 2x 14v 2.5A output for Amp 6. i2c Auth Chip 7. 44.1 khz sampling freq for Audio 8. Serial / Latch ALSA hardware driver needed Note: I have

    $2027 (Avg Bid)
    $2027 Avg Bid
    2 bids

    I would like help completing a project; I would like to see how someone else would first, design controllers and simulate in various conditions. Second, derive a system model for the Quanser DCMCT motor/flywheel system, implement your controllers on this system, and analyse differences in performance. I can provide examples and further information - what is mostly needed is knowledge of LabView/...

    $32 (Avg Bid)
    $32 Avg Bid
    14 bids

    1. QCA7500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. PWM Linear hybrid independent, isolated power supplies for DAC, CPU and additional 2x 14v 2.5A output for Amp 6. i2c Auth Chip 7. 44.1 khz sampling freq for Audio 8. Serial / Latch ALSA hardware driver needed Note: I have

    $1971 (Avg Bid)
    $1971 Avg Bid
    4 bids

    1. BCM60500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. PWM Linear hybrid independent, isolated power supplies for DAC, CPU and additional 2x 14v 2.5A output for Amp 6. i2c Auth Chip 7. 44.1 khz sampling freq for Audio Note: I have C code ready for porting.

    $795 (Avg Bid)
    $795 Avg Bid
    5 bids

    ...Streaming Receiver homeplug device with a AD1862 DAC 1. BCM60500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. PWM Linear hybrid independent, isolated power supplies for DAC, CPU and additional 2x 14v 2.5A output for Amp 6. i2c Auth Chip 7. 44.1 khz sampling freq for Audio Note: I have

    $333 - $999
    $333 - $999
    0 bids

    I need an Android app. I would like it designed and built. I need a app that receive a data about temperature from a module bluethoot Ardunino , and memorize it and show it . It will be stable

    $39 (Avg Bid)
    $39 Avg Bid
    13 bids

    Hi, I am hiring an electrical engineer, preferably with motor controller design experience, to create PCB for manufacturing (schematic will be given). Some of the task include: -route schematic into PCB to fit specific size constrain -provide feedback in circuit optimization & component selection Cheers Steven

    $192 (Avg Bid)
    $192 Avg Bid
    44 bids

    Hi everyove. I need to modify this sketch which is a PID motor controller. You can find the sketch and more details here: [login to view URL] I would like to implement the following features: 1. Motor should stop whitin a time (acording to actual pwm output) if no feedback is received from encoder. 2. Brake should open

    $192 (Avg Bid)
    $192 Avg Bid
    33 bids

    ...can select: Just red Just green Just blue White (all three together) Yellow (red & green together) Each of the LED's requires different voltages so suggest using arduino UNO PWM to drive them through mosfets. The LED's are common anode Here's a link for the LED https://www.amazon.co.uk/gp/product/B01DBZK64K/ref=ox_sc_act_title_2?smid=A29VZUSG1WM39I&psc=1

    $188 (Avg Bid)
    $188 Avg Bid
    33 bids

    Hi, I need help with designing and implementation of a fuzzy controller (Zero-order Sugeno Fuzzy Inference System) for balancing an inverted pendulum system.

    $47 - $47
    $47 - $47
    0 bids

    I will share detail over private chat.

    $29 (Avg Bid)
    $29 Avg Bid
    7 bids

    Use MATLAB to model engineering systems and design, implement, and test controllers to modify their closed-loop behaviour. Use of MATLAB and/or Simulink to complete a series of control-based problems. Detailed project brief would be provided when the discussion starts.

    $77 (Avg Bid)
    $77 Avg Bid
    10 bids