Projectsdata available free mechanical enginerring jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    39,511 projectsdata available free mechanical enginerring jobs found, pricing in CAD

    Can you help me to install free version of ArcGIS 10.8.

    $22 (Avg Bid)
    $22 Avg Bid
    2 bids

    Modelling some box sections with flanges and holes. And some other framework. When all the design is complete then drawings of the parts.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    18 bids

    Excellent Opportunity Hi Everyone, We are looking forward to connect with experienced professionals in Consumer Electronics and Home Appliances vertical who are ready to work on project basis. Skills required are :- 1. Complete Product Design ( Mechanical + Aesthetics ) 2. 3-D CAD Modelling 3. Plastic Component Design Software skills :- 1. SOLIDWORKS 2. KEYSHOT 3. RHINO Note :- Desired cand...

    $1669 (Avg Bid)
    $1669 Avg Bid
    3 bids

    The scope of the job we expected including: - Contact Romania’s influencer to promote Free Fire gaming in Romania - Communicate Free Fire marketing campaign to influencers - Execute Free Fire online marketing campaign in Romania

    $533 (Avg Bid)
    $533 Avg Bid
    6 bids

    Control System Course Introduction to VisSim/ Embedded Controls developer

    $142 (Avg Bid)
    $142 Avg Bid
    9 bids

    Executive Summary Soberity of a driver is one of the most significant requirement to avoid crashing and accident. There are 3 standard test used by police officer to detect whether a driver is “sober” enough to drive. One of them is the walking test (see [login to view URL]). We want to create a system to automate the walking test as part of soberity test according to the setup descri...

    $533 (Avg Bid)
    $533 Avg Bid
    3 bids

    I have a patio structural drawing all drawn up and just need an Australian Certified structural or Mechanical engineer (With Australia MIEAust number to verify and sign off).

    $197 (Avg Bid)
    $197 Avg Bid
    4 bids

    a manufacturing procedure was written but I will need help reviewing and going over the technical details if missing. I will provide the drawings, instructions videos and you will need to go over them and help revise the instructions procedure. mechanical/electrical engineer or someone who has a lot of experience in writing procedures.

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    16 bids

    Hello everybody, Place your bid if you are a native and professional ghostwriter I need a ghostwriter for a book on "AR and VR technology in customer service". The book should deal with the following topics, among others: - Differences between AR, vR and mixed reality - Advantages of the individual technologies - Possible uses in customer meetings at banks and insurance companies - Pr...

    $170 (Avg Bid)
    $170 Avg Bid
    2 bids

    Book title: Three Things Every Sports Presenter Needs To Know When Starting Out Subtitle: The Complete Beginner's Guide To Creating Video Content Pages: 10 Type: Free guide -Slim Book. See example pic attached (Note: Just one book not the second underneath it) Colour theme: Red I've created a free guide for aspiring sports presenters called 'Three Things Every Sports Presenter Need...

    $34 (Avg Bid)
    Guaranteed
    $34
    23 entries

    Hi I would like the information of actions like deposit, withdraw and trading are available for different exchanges automatically. It will make me save time. I have to check manually if the actions are available.

    $339 (Avg Bid)
    $339 Avg Bid
    4 bids

    Place your bid if you are a native German and professional ghostwriter I need a ghostwriter for a book on "AR and VR technology in customer service". The book should deal with the following topics, among others: - Differences between AR, vR and mixed reality - Advantages of the individual technologies - Possible uses in customer meetings at banks and insurance companies - Procedure in ...

    $140 (Avg Bid)
    $140 Avg Bid
    1 bids

    If you are a mechanical engineer with very strong calculations of Fluid dynamics, hydraulics, pump calculations, pressure, volumetric flow etc. then we have a project where you have to do engineering calculations for our filtration system followed by CAD simulations, CFD. etc. Details of the project will shared after NDA. If you wanted to know about the filtration systems here are the youtube lin...

    $505 (Avg Bid)
    $505 Avg Bid
    13 bids

    Freelancer required who is comfortable in writing Electrical, E&C, Mechanical and Civil Projects in attached format. Indian content writers are preferable. 1. Researching and organizing facts and sources 2. Consistently meeting tight project deadlines 3. Writing meaningful and engaging content on given topics 4. Reviewing the content for writing, spelling, and grammar

    $111 (Avg Bid)
    $111 Avg Bid
    13 bids

    We are having ideas to develop high jump stands where the bar height is remotely controlled and in our process to start right, we would like to receive suggestions how to approach our development phase together with a very high level though process around mechanical and electronic design. We appreciate innovative thoughts in many aspects and the attachment you can read more details together with s...

    $123 (Avg Bid)
    Guaranteed Sealed
    $123
    3 entries

    Building a retirement home near Dawson, TX 76639. Have home and foundation design but need a mechanical engineer to detail out water, sewer and venting for rough in plumbing so can accept bids from plumbing companies. Would like to have good enough drawings that a reasonably intelligent helper build out with confidence. Would like layout, elevations and a bill of materials. I will attach home a...

    $151 (Avg Bid)
    $151 Avg Bid
    7 bids

    We are in to US IT Recruitment and we would like to hire Email Marketing professional to send inbox delivery and should be responsible for proper responses from other recruiters.

    $102 (Avg Bid)
    $102 Avg Bid
    13 bids

    Hello, I have a requirement where I need to create a horizontally expandable table and fetch dynamic data. It needs to show/hide columns according to click ( + / - ) . I’m attaching the demo data we’re using and a video of how the table should work. Please let me know if someone has experience with the same. Demo Data: [login to view URL] JSON :

    $108 (Avg Bid)
    $108 Avg Bid
    6 bids

    Problem statement: Covid has made it necessary to constantly take care of our safety. A large part of this precautionary measure is sanitizing our hands before any checkin/checkout at stores, busy places etc. While most of the places did take some steps to set up sanitizing stands to start with but over time this has lost it’s fad and things are back to normal but Covid is not yet out. Th...

    $1732 (Avg Bid)
    $1732 Avg Bid
    4 bids

    'Free Press PR' is a marketing company that belong to the global press field. In our company we have two departments- first, press department. second, social media department. Nowadays, we are looking to hire employees for the two of them- writers and caricature maker who speaks Arabic. Our company has many branches around the world but like in the modern world, the employee's loc...

    $131 (Avg Bid)
    $131 Avg Bid
    14 bids

    Control System Course Introduction to VisSim/ Embedded Controls developer

    $107 (Avg Bid)
    $107 Avg Bid
    6 bids

    At the Whole Life Challenge, we’re never going to ask you to change everything you’re doing right now, all at once. We believe in small steps. Change one thing today and make it stick. Change one more thing next month. Change another next year. If you commit to small, lasting change, then you can and will change everything you want — but it doesn’t have to happen all at onc...

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    8 bids

    Hi I am looking for someone that has time to take on ongoing mechanical part modelling in Fusion 360 I have current files that sometimes need amending, or I have parts that need replicating from 2d drawings to 3d files for Either 3d printing or cncing Along with that you must be able to create 2d measured drawings quickly from the 3d files. This project is for a simple dxf design of a plate with ...

    $54 (Avg Bid)
    $54 Avg Bid
    5 bids

    I have a 70% complete 3d model for 1 ornamental wooden design which needs to be completed with full accuracy as per my specifications/a 2d drawing I have.

    $112 (Avg Bid)
    $112 Avg Bid
    19 bids
    togle jack 5 days left

    Summary of the project A motorized toggle jack is a device which lifts heavy equipment’s and vehicles so that maintenance can be carried out underneath. A motorized toggle jack usually uses mechanical advantage to lift a vehicle. It is a type of jack which is operated by turning a lead screw by rotating of a motor shaft.

    $74 (Avg Bid)
    $74 Avg Bid
    3 bids
    Mechanical Engineer , HVAC 5 days left
    VERIFIED

    I need expert Engineer in mechanical design

    $10 - $18 / hr
    Sealed
    $10 - $18 / hr
    32 bids
    alternator design 5 days left
    VERIFIED

    Require assistance to design a 415v generator alternator Ideally someone with generator design and experience. Require both electrical and mechanical design.

    $2085 (Avg Bid)
    $2085 Avg Bid
    10 bids

    There is a set of questions that need to solve for a duration of 1 hour. It is an exam whose sample questions can be seen from the pictures attached. Please reply only if you are able to solve them within the duration.

    $101 (Avg Bid)
    $101 Avg Bid
    9 bids

    Hi Chita C., This is the project we talked about. I have attached the land layout... we need two building that are same design inside and thrid small building for the mother. Here are the details. Ground floor: Living room Dining room Formal room/salon Kitchen Maid room beside kitchen Bedroom with toilet Wc First floor: 1 master bedroom 2 bedrooms 3toilets Cosy living/family room Balco...

    $185 (Avg Bid)
    $185 Avg Bid
    1 bids

    A large-scale (10MW) ground-mounted solar farm will be established in North-East NSW, on land. You have been tasked with the design of the foundations of the photovoltaic mounting system, depicted in Fig. 1 below. Each segment of the mounting system is going to be founded on two free-headed closed-end hollow steel pipe piles. The design (factored) ULS loads applied at the head of each pile type (A...

    $118 (Avg Bid)
    $118 Avg Bid
    12 bids

    Hi, I need to build a mobile app about a martial art to get to know the academy where I practice, so show photos and videos of techniques, schedule of the practices, history of the club, name and photos of the instructors. The idea is to promote the club, so there is no intent to charge for the download of the app, but it would be important if is possible to published on both stores (Apple and Pl...

    $452 (Avg Bid)
    $452 Avg Bid
    14 bids

    I need to be able to search for available time slots on a public Google Calendar that I do not admin. The calendar lists bookings on the hour and 1/2 hour. There are 3 bookings per hour and 1/2 hour time slot allowed. I need to be able to view a calendar layout showing timeslots with available spaces. I only want to see the available times. Maybe another google calendar that shows the live result...

    $212 (Avg Bid)
    $212 Avg Bid
    8 bids

    Hello, We are looking for a freelancer to help design a PCB board which controls an LED array. The LED array is external and is not included in this project. We need the PCB schematic, layout, component selection and firmware. We will provide more detail and a basic flow diagram once a freelancer has been chosen and will work with you to help refine it. Once this project is done, there will be...

    $650 (Avg Bid)
    $650 Avg Bid
    47 bids

    Hello. My name is Yeni. I represent a startup currently based in Lagos, Nigeria. I am looking for a very experienced software developer to be help integrate some features into the Minimum Viable Product (MVP) of a Maps & Navigation android app we are building. The MVP has been built/written in Kotlin and deployed on Google Playstore (beta testing). The codebase is in a private repository in G...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    9 bids

    Hello Greetings, I am highly interested to join your team, I am sure I will be valuable asset for your organization. I am an enthusiastic mechanical Design Engineer, having 5 certifications from Dassault Systems Looking forward to hearing from you soon BR Muneeb

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I need to hire an engineer to complete a site plan for me. I have a DWG file of the site plan and also of the lot survey. I have attached an image of 2 things: 1.) A site plan 2.) A survey of the existing elevations from the structure of the house on a lot that has not received the final grading. Your job is to add the following to the siteplan: · Site topography (existing and pro...

    $186 (Avg Bid)
    $186 Avg Bid
    24 bids

    Hi Freelancers. We want to improve UI/UX design for our website. The designer who has made the design was not that experienced with UI/UX. So we are posting a contest to get our design final touch. Though I had always a bad experience in posting a contest as most of the freelancer copies from an existing website and I don't want to experience this thing now. So this time I am not making a c...

    $123 (Avg Bid)
    $123
    20 entries

    Hello there, i'm looking for someone professional to design and refine my brand, Using modern design in arabic and English -- provided by me When placing a bid kindly mention (invoker) in your offer ** otherwise your offer is considered automated this task involves drawing one to three items, Design branding materials.

    $54 (Avg Bid)
    $54 Avg Bid
    65 bids

    Blog with consistency and SEO Friendly words

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    17 bids

    Acadmic Writer Needed If anyone available - Delivery in 5hrs - 1400 words

    $19 (Avg Bid)
    $19 Avg Bid
    42 bids

    Mechanical Engineer required . Please place bid if you are available today

    $185 (Avg Bid)
    $185 Avg Bid
    27 bids

    I am after a few projects to be designed end to end, and looking forward to have following 1) Floor Plans 2)landscape plans 3)North East and Northwest Elevations 4) Roof Plans 5) Sections 6) Electrical Plans 7) Airconditioning Plans 8) Siteplan and Stromwater Drainage plans 9) southwest and southeast elevations 10) Windows and Basix Specifications 11) Facade and 3D

    $511 (Avg Bid)
    $511 Avg Bid
    62 bids

    Water Treatment Drawing: The 4" well is not part of the pad, but outside, the distance in between is undetermined right now. This project actually is going to have two of everything, meaning that there are two pads with two sets of equipment next to each other. The pads will be 10 feet apart. The 3HP well pump is 230V / three-phase / 60Hz / 9.8 FLA The 5HP centrifugal pump is 230V / three-...

    $1259 (Avg Bid)
    $1259 Avg Bid
    27 bids
    mechanical degin 3 days left

    mechanical degin in solidworks software

    $18 (Avg Bid)
    $18 Avg Bid
    20 bids
    Need 3D Walkthrough 4 Minutes 3 days left
    VERIFIED

    Need 3D Walkthrough with some mechanical functions of machine

    $21 (Avg Bid)
    $21 Avg Bid
    5 bids

    i need a mechanical engineer for some topics related to mechanical engineering

    $70 (Avg Bid)
    $70 Avg Bid
    44 bids

    i have a project related to mechanical engineering department and its simple

    $26 (Avg Bid)
    $26 Avg Bid
    31 bids