Programms stepper motor jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,684 programms stepper motor jobs found, pricing in CAD

    We require a person to install 2 stainless mixing tanks of 6,000 litres and 3,500 litres capacity. They have a 96kw electric steam generator that is required to be fitted along with the steam pipes, transfer motor and flow meter. An additional Power box will be required to be fitted for this equipment. This is a Commerical listing/job.

    $2976 - $4960
    Local
    $2976 - $4960
    0 bids
    FEM simulation electric motor 6 days left
    VERIFIED

    The stator is fixed by "press-fit" in a casted aluminium housing. The max tork, which could be transmitted, is to be calculated (FEM simulation) before the stator rotates in the housing. Results (pictures or video, etc.) with the mechanical load of the components has to be presented

    $240 (Avg Bid)
    $240 Avg Bid
    11 bids
    Trophy icon T-Shirt & Logo Design 3 days left

    Must have: Military logo for a T-Shirt T-shirt color = Khaki Logo color = Black (1 color) Verbiage is as follows: “EMP-40” - (primary focus – short for Electromagnetic pulse FJ-40) “Resurrection Land Cruisers” – (less focus - our company) Theme: We resorted a Toyota FJ-40 with an electric motor for a client. The idea is this is his “bug-out” veh...

    $127 (Avg Bid)
    Guaranteed Sealed
    $127
    16 entries
    logo design -- 2 5 days left
    VERIFIED

    I need a logo designed for motor bike sports.

    $29 (Avg Bid)
    $29 Avg Bid
    129 bids
    Can bus on esp32 and Nextion 5 days left
    VERIFIED

    Hello, Need a program for ESP32 (arduino ide) reads CAN BUS information sent from a motor controller (Kelly cotroller - PDF attached) and sends the Can bus information to nextion display. A Mcp2551 transceiver will receive CAN high and low signal and send data to Esp32. We will use this data to create panel with motor temperature, rpm, voltage, ... Similar [login to view URL]

    $231 (Avg Bid)
    $231 Avg Bid
    15 bids

    Hello, I want a project(development,design,conception) of a eccentric press to produce sugar in cubes(the sugar has to be the icumsa45). The prense has to have: -One Hopper Chute, extraction system and soft send/push of the finished product(sugar cubes). My Idea is a option to one mechanic system all interconnected. You have to take in consideration that the grainy sugar it´s mixed with...

    $1165 (Avg Bid)
    $1165 Avg Bid
    4 bids

    hi freelancer i had convert an alternator car generator into sensorless BLDC motor . i would like to control this type of motor using suitable driver system with Arduino. The system must have the following point : 1-Code of the Arduino with the perfect control algorithm using the feedback of BEMF from each phase as a sensor to determine the next phase movement precisely 2- Simulation using Prot...

    $169 (Avg Bid)
    $169 Avg Bid
    4 bids

    Hello, we are a team of four members looking to start a food truck business, but the initial investment is so high to buy the food truck. so we are looking for someone or a team to build the food truck from scratch with a good space-saving interior and as much small as possible. 1) EV or motor 2) If EV then it should sustain the load. 3) Come up with the designs and tell us about the fabrication a...

    $351 (Avg Bid)
    $351 Avg Bid
    3 bids

    my technology affects the way air flows through the combustion chamber. Looking for something similar to this: [login to view URL]

    $653 (Avg Bid)
    $653 Avg Bid
    20 bids

    Currently this Arduino project uses the TMCStepper library to configure a set of six(6) TMC stepper drivers. Once configured the TMC drivers are no longer communicated with. Having configured the TMC driver slows down the main loop even though there is no TMC code in that loop. There looks to be an timer interrupt running in the back ground even though the driver is not being communicated with. ...

    $169 (Avg Bid)
    $169 Avg Bid
    7 bids

    I have developed a design for a brushless Axial Flux motor for an innovative E-bike product, and would like to find a subcontractor to complete EM simulation on EMSWorks, MagNet or similar, and then complete multiple design iterations to optimise the design. Subcontractor must have expertise in motor design and simulation using 3d EM software and must be based in the EU or the UK. - Design goals...

    $3644 (Avg Bid)
    $3644 Avg Bid
    9 bids

    HermesTrader is an app that analyzes, ranks stocks, indices, cryptos and gives a clear long, short, or neutral rating every day. HermesTrader gives you answers, not just data. What to buy. What to sell but most importantly, when… The execution signals concern a selection of Greek and American shares, indices, gold, and cryptos. The recommendations are ideal for end-of-day investors. The sho...

    $309 (Avg Bid)
    $309 Avg Bid
    1 bids

    Clubsport BMW M3 GT2 project Attached are photos of the steering wheel from multiple directions. Useful dimensions: -------------- Wheel diameter - 320mm Wheel grip depth - 35mm Wheel grip height - 30mm Wheel height from top to bottom - 305mm Offset from front of wheel to - solid button plate - 35mm (this is sometimes called the dish depth) - to shifters - 80mm - to end of silver/red quick r...

    $338 (Avg Bid)
    $338 Avg Bid
    1 bids

    I WANT CONTROL 22OVOLT BLDC MOTOR . START AND STOP AND SPEED UP AND SPEED DOWN AND REVERS AND FORWARD, ARDUINO CODE AND PCB DESIGN.

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    DESIGN OF SLIDING MODE CONTROL FOR DC MOTOR USING LABVIEW.

    $100 (Avg Bid)
    $100 Avg Bid
    7 bids

    We need someone who can help us build a software to control our steering wheel motor in our car racing simulator. The software should help control the amount of torque the motor produces , the degree of rotation one wants from the motor , damper, friction, inertia settings, should be compatible with a wide range of encoders and stepper motors. There is a lot in the project which can not be conde...

    $429 (Avg Bid)
    $429 Avg Bid
    4 bids

    Hello Freelancers, designers and experts, I am designing a mechanical system using servo motors, so this serves as a driving component and there is the rest of the mechanism, which could be called a driven component. Servo motor produces 180 or 270-degree rotation with a particular torque, I don't want to lose or change either (stay constant). We know that in many cases if a torque is applie...

    $50 (Avg Bid)
    $50
    1 entries

    I am looking forward to build a motor insurance website. The main function of the site is to provide customers quotation on renewing their insurance.

    $576 (Avg Bid)
    $576 Avg Bid
    15 bids
    grow my website 1 day left
    VERIFIED

    I am a pediatric physical therapist with a over 19 years of varied experience - clinical, academic, research. I am starting my own PT clinic for kids - home-based and then renting space in town. I am looking for a website developer who can help my idea appeal to families. My vision is to build a clinic that is family-friendly and about the development of motor skills developed inside and used ...

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    63 bids

    I need help building an Arduino control system. I need codes, wiring details and simulation of control system using Arduino for open source ventilator. The project uses Stepper motor, Pressure sensors(BMP 280), alarms (Peizo Buzzer), and different potentiometer to control the variables. It is a volume control ventilator so tidal volume, I:E Ratio and BPM controlled by potentiometer. It should be a...

    $226 (Avg Bid)
    $226 Avg Bid
    16 bids

    A given BLDC motor, being run with MOSFET based BLDC driver draws current when running free or when under load. We need a system to: 1. Vary input voltage using digital settings. 2. Measure current drawn at a particular given voltage and display data accordingly. More details on subjected matter shall be provided to interested candidate.

    $352 (Avg Bid)
    $352 Avg Bid
    13 bids

    We are looking for iOS DeveloperInvoice and Job Card App for [login to view URL] This is a motor mechanic workshop software where the mechanic fixes cars 1. Invoice and Job Card creation and CRUD 2. The Invoice and Job Card look 99% similar so do one first and copy it to the other. I need the job card first. 3. Both the invoice and Job card have 99% of the same detail. This...

    $863 (Avg Bid)
    $863 Avg Bid
    21 bids
    Mechanical Engineer 12 hours left

    Mechanical engineer required to design a 7 tier conveyor belt system/shelf engineer must be able to -calculate frame size and requirements for the load -calculate roller, tensioner and motor speeds -provided detailed technical drawing for construction of the belt

    $565 (Avg Bid)
    $565 Avg Bid
    23 bids

    I have a simple EasyEDA circuit with an on/off switch, vibrator motor, qwiic/stemma connector, and ESP32 Adafruit Feather that needs a small change - the ground to go to the other side of the on/off switch (the middle terminal is pointing to EN on the ESP32 -- the ground is pointing to the wrong side of the switch). This is my first design project so I need somebody to look over my circuit and pcb...

    $37 (Avg Bid)
    $37 Avg Bid
    8 bids

    A sample paper is attached here. More details and guidelines will be shared in Chat.

    $85 (Avg Bid)
    $85 Avg Bid
    7 bids

    We build overlanding trailers, fire trucks and off road accessories. I am looking for someone that can do some basic Adruino uno programming to control 2 12v motors on timers that are programmable from a key pad input. Basically i need the key pad to have a start button that turns the unit on. One motor will always run. The second motor will turn off for 2-5 seconds depending on the keypad input a...

    $103 (Avg Bid)
    $103 Avg Bid
    30 bids

    A sample paper is attached here. More details and guidelines will be shared in Chat.

    $61 (Avg Bid)
    $61 Avg Bid
    3 bids

    I want some to help me to suggest component for Hbridge for DC motor 12V 15 amp continuous current. operate on TTL logical voltage

    $23 (Avg Bid)
    $23 Avg Bid
    4 bids

    Hi Andrii., I noticed your profile and would like to offer you my project regarding PCB design with stepper motor control, bluetooth and wifi. I'm new to this site and am unsure of budget, so I am happy to follow your advice on this also. Kind regards Omar

    $1003 (Avg Bid)
    NDA
    $1003 Avg Bid
    1 bids

    I am looking for a wiring diagram for a small and simple juice press machine. There are only 03 electrically operated parts. 1. 12VDC Actuator 2. Motor 3. Magnetic proximity switch connected to motor. Probably Actuator would need to be programmed with an Arduino controller for automatic retract function. There will be only 3 buttons on the front panel. There are only two functions:- 1. Motor ON...

    $15 (Avg Bid)
    $15 Avg Bid
    7 bids

    I need a stepper template that needs to be built as per the requirements. I am looking for someone with Python, Django, JavaScript, HTML, CSS and PgAdmin4 (Postgres) skills. It is only a 3-step template. Please do not message or believe in bidding if you do not possess any of these skills. The budget is 50 so do not bid if you think you cannot do 50. I cant increase for a small little template. ...

    $58 (Avg Bid)
    $58 Avg Bid
    8 bids

    Need to design and program a control card for micro-stepping control of stepper motors. data of stepping can be received via serial or pulse input from MCU. possibility of encoder integration to be explored.

    $413 (Avg Bid)
    $413 Avg Bid
    9 bids
    Trophy icon Logo-Mascot drawing for motor biker 21 hours left

    Need a logo-avatar to stand for a motor biker lady friend of mine. The drawing needs to include the following: 1- The motor biker on her motorbike: NO HELMET, WE NEED TO SEE HER FACE Please see Picture 1 for the bike and tracksuit photo and Picture 2 for her face photos. 2- Her dog (on the bike or next to it). Please see Picture 3 for the dog 3- The name: “TORNADE #241” under or abo...

    $69 (Avg Bid)
    Guaranteed
    $69
    58 entries

    Dear, We have a reactJs application and we want to create a reactNative application as well for mobile users. API's are ready. we only need a developer to design the screens for us and integrate with our API's. Its about a grocery store so people can order their products and manage their orders for now. I am personally a developer but. due to my full time Job at Ford motor company Iam n...

    $1964 (Avg Bid)
    $1964 Avg Bid
    38 bids

    Dear bidder, I want to build a small CNC-Project and need an arduino sketch as well as recommendation about the parts I need. As I am not very used to arduino I also need some assist in adding the library and connecting all together. Parts I want to use: Arduino (UNO / MEGA) with CNC-shield, two Nema Stepper and 3 Endstops. LCD-Display (16x2) with 6-Button control or alternative controll-wheel. 2...

    $38 (Avg Bid)
    $38 Avg Bid
    10 bids

    The project is to replace the actual mistsubishi PLC/winview panel on a chinese stick pack machine with a siemens s7-1200 and Simatic 7" panel. Machine is quite simple with 2 heating device, one motor for mixing, one stepper driver for dosing, two stepper for the foil.

    $654 (Avg Bid)
    $654 Avg Bid
    24 bids

    I have the benzlers motor. the manufacture says that the motor weight is 24kg, but when i'm open the step file i see that the motor weight is only 7.6kg. How can i modify the materials by the manufacture so that the motor weight will be 24kg. I didn't found material selection of the motor.

    $28 (Avg Bid)
    $28 Avg Bid
    14 bids

    I bought electric scooters from aliexpress 2 months ago and many of them have battery problems motor problems and even external defects. I tried to sort it out with the company but they ended up blocking me and scamming me. my only hope is now to get a chargeback from my bank but the bank is asking for "expert opinion" so I'm looking for someone to write up a report for me that has...

    $34 (Avg Bid)
    $34 Avg Bid
    20 bids

    I have multiple (up to 99) 12VDC motors need to be controlled with one transmitter. In other words, when a code or address enters, that particular motor (receiver) connects to the transmitter and can be turned the motor on momentarily and backward momentarily as well. Example: 99 12VDCmotors connected to 99 individual receivers. They are all off. The operator punch number 56 on transmitter and mo...

    $550 (Avg Bid)
    $550 Avg Bid
    35 bids

    A sample paper is attached here. More details regarding the hardware will be shared in Chat.

    $243 (Avg Bid)
    $243 Avg Bid
    6 bids

    Drop Down TV Arduino Functions: I can have pictures for context soon. Hardware List: Stepper Motor and Driver -- https://www.amazon.com/gp/product/B082MGD9KM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Current Sensor ACS712 https://www.amazon.com/gp/product/B07SPRL8DL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Proximity Sensors- 2 count-- (one used on top and bottom of main ...

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    7 bids

    i have Ac motor frequency drive and solar pump inverters prodcued in china , i want to sell in Bangladesh and India , the prices are lowest among all other brands , my brand is Rija with one year warranty and after sales service , am looking for someone to help me to sell it .

    $692 (Avg Bid)
    $692 Avg Bid
    5 bids

    Website Optimization for better Google Ranking. Can you make me a quote: for to be ranked on page 1 for the following search key words: - Ibiza day charter / day charter ibiza - ibiza boat charter / boat charter ibiza - ibiza week charter / week charter ibiza - luxury yachts ibiza / ibiza luxury yachts - sailing charters ibiza / ibiza sailing charters - ibiza sailboat charter / s...

    $230 (Avg Bid)
    $230 Avg Bid
    65 bids

    Need help with creating a short arduino program. I am trying to use PIR sensor to activate and control the stepper motor using Sparkfun easy driver. I want to write a arduino program in such a way that when motion is detected by PIR sensor, the stepper motor will rotate 90 degrees counterclockwise (0-90). When next motion is detected, the stepper motor will further rotate 90 degrees (90-180). With...

    $42 (Avg Bid)
    $42 Avg Bid
    6 bids

    DESIGN OF SLIDING MODE CONTROL FOR DC MOTOR USING LABVIEW. More details will be shared in chat. Relevant research and hardware details are attached here. Thanks.

    $133 (Avg Bid)
    $133 Avg Bid
    6 bids

    Lara Storage is a family business offering a secured storage facility for boats, caravans, trailers and other motor vehicles. We are located in Lara, Victoria, Australia. Lara Storage is a division of Rosewood Farm Group. The new identity aims to improve public awareness in the greater Geelong region. I'm looking for a fresh, modern logo for Lara Storage. It must be unique and simple i...

    $150 (Avg Bid)
    $150
    549 entries

    DESIGN OF SLIDING MODE CONTROL FOR DC MOTOR USING LABVIEW. More details will be shared in chat. Relevant research attached here. Thanks.

    $179 (Avg Bid)
    $179 Avg Bid
    2 bids