Pcb arm sampel jobs

...PCBs. Key Requirements: - Soldering: The resistors need to be soldered professionally with leaded solder. - Experience: The ideal candidate should have experience in PCB assembly and soldering. - Quality: It's crucial that the resistors are soldered correctly and with high quality, as the functionality of the prototype depends on this. - Quantity: I require 10 PCBs to be assembled in this manner. Shipping: Once the PCBs are soldered, they will need to be shipped via Express courier service. This means that the professional must also be able to handle the shipping requirement. If you have experience with prototype PCB assembly and are confident in your soldering abilities, I'd love to hear from you. Please provide details of your experience, and also let ...

I urgently need a skilled Electronics Engineer who is proficient in working with Cadence Virtuoso. Your tasks will include: - Designing a simple circuit - Capturing the schematic of the circuit - Creating a PCB layout of the circuit - Writing a comprehensive report on the completed tasks Due to the urgency of this project, I would prefer someone who can get started as soon as possible. Ideal Skills: - Expertise in Electronics Engineering - Proficiency in circuit design - Solid experience with schematic capture - Strong skills in PCB layout - Experience in Cadence Virtuoso - Ability to write clear and comprehensive reports I look forward to receiving your bids and working with you on this project.

I am looking for an experienced Electronics Engineer, well-versed in using Altium Designer, for a series of projects that demand proficiency in a wide array of electronics, specifically focusing on Microcontroller integration, PCB layout and USB connectivity. Key Aspects: - PCB Layout design - Microcontroller implementation - USB Connectivity solutions Additional Requirements: - Expertise in Circuit design - Experience in selecting suitable electronic components - Signal analysis knowledge - Ability to conduct thorough testing procedures This project demands an adept understanding of electronic systems and circuitry meant for consumer electronics. Candidates with a solid track record in crafting and refining consumer electronic designs are strongly preferred. Your task ...

I'm seeking an experienced PCB designer to develop a custom ATSAMD21 Micro PCB board. - A USB interface, specifically pin header for most GPIO and USB D lines. - 10+ GPIO pins required for this project. The ideal candidate should have prior experience working with ATSAMD21 Micro PCB boards as well as an understanding of USB interface technology. Proficiency in board design and a keen eye for detail will be crucial for success in this job.

I need an expert in Printed Circuit Board (PCB) design to assist me in manufacturing an electronic product that falls under the category of consumer electronics. Key Requirements: • Comprehensive knowledge in PCB design • Expertise in electronic product manufacturing • Experience in Consumer Electronics sector In particular, I am interested in those with a versatile portfolio, showcasing their ability to work with various complexity levels of PCB design. Although the specific complexity level of this project is not yet final, I am looking forward to discussing it during our project discussions. This project is an excellent opportunity for those who are passionate and experienced in the consumer electronics field. Let's bring our electronic...

...This will allow you to grow with our directors and keep rising to new heights. We are not looking for someone who just does what is asked. As a successful applicant, you will be proactive by becoming accelerators to the performance of our two most senior executives. As an extension of that, you will make a positive impact on hundreds of employees, our clients, our larger community, and our charity arm that sends kids to school. You will be responsible for: - Providing high-level administrative support to our executive team, including managing calendars, scheduling meetings, creating agendas, and ensuring team members are prepared for said meetings. - Managing appointments and travel arrangements for our two directors. - Coordinate and facilitate meetings, conferences, and spec...

...second will have a USB-C female to USB-C female connector. Key Requirements: - Design of two separate PCBs with USB-C connectors - One PCB should have a USB-C female to USB-C male connector - The other PCB should have a USB-C female to USB-C female connector - The male connector needs to be mounted at 90 degrees to the board - One female connector needs to be mounted at 90 degrees to the board - Both boards should support data transfer and device charging - Both boards when oriented should connect to each other with the 90 degree connectors forming a Z shape. - No additional components or features are required. Ideal Skills and Experience: - Proficiency in PCB design and layout - Experience with USB-C connectors and associated protocols - Ability to design for bo...

1. Right cheek is swollen more pronounced, would like it to be similar to other side, blouse tidied, bra line present and top look more presentable? 2. Same thing with right cheek cheek, and possible to make lips look better, think they look swollen also. Arm in photo to make out upper arm little smaller. 3. Same with last photo, cheek, and top, bra line out and top tidied? Not sure if all is possible.

I'm looking for a skilled professional in Proteus and KiCad to assist with an electronic simulation and PCB design project. - I require assistance primarily with circuit design, schematic capture, and component selection and placement. - I already have specific electronic components in mind for this project, so I would need your expertise in helping me integrate these into the design. - The primary purpose of the electronic device I'm designing is for control and automation. Ideal Skills and Experience: - Proficiency in Proteus for electronic simulation - Proficiency in KiCad for PCB design - Experience with circuit design, schematic capture, and component selection and placement - Previous projects focusing on control and automation systems would be a bonus. ...

Update schematics, BOM and PCB. Create Panel.

...industrial process controls via IoT to enhance energy efficiency and environmental management. Ideal Freelancer Qualifications: - Proven experience in IoT device development, preferably within an industrial setting - Familiarity with MQTT, AWS, LoRaWan and Dataloggers - Proven track record in energy and environmental management - Ability to deliver accurate, property-level data precision. - Full PCB layout, design and development Your advanced skills and experience in IoT developments will be pivotal in the success of this project. Let's revolutionize industrial process control together! To start the project and share the confidential materials we have, we require the signing of an NDA and we need proof of identity. Therefore, we would appreciate, if you please provide a...

We are working on a power converter board and looking for an expert in MCU stm32. We are using the stm32G474ret6 and having several issues that we are not being able to explain . The main issues are : startup state of MCU systick clock for hal_delay non functional Debugger resetting MCU in middle of operation code not stored in memory after powercycle . We are looking for somebody that is v...the stm32G474ret6 and having several issues that we are not being able to explain . The main issues are : startup state of MCU systick clock for hal_delay non functional Debugger resetting MCU in middle of operation code not stored in memory after powercycle . We are looking for somebody that is very used with stm32 MCU and know about electronic schematics and circuit for mcu integration on ...

...driving force behind a key industrial project, I'm currently in the market for a talented and meticulous PCB board developer. Your knowledge of the Internet of Things will be challenged, with the board needing to achieve: - Seamless Wireless connectivity - Comprehensive Sensor integration - Precise Data logging capabilities What's the end goal? Enhanced industrial monitoring. This board will lie at the heart of our operation, gathering and transmitting valuable, real-time data back to us for accurate monitoring and decision making. The must-have communication protocol for this board? WiFi. It's a non-negotiable, ensuring our board remains connected and efficient. If you're well versed in PCB design, experience with WiFi connected devices, and have ...

More details: What specific internal parts do you need for the assembly character? Gear mechanisms, Electronic circuits, Structural components What are the specific functions or movements that the assembly character should be able to perform? Arm movements, Facial expressions What is the desired size or scale for the assembly character? Customizable

I'm looking for a talented designer with advanced graphic design skills. I need a professional and corporate style capability statement created for the health arm of our business. The project involves: - Inserting images into the document. - Ensuring the statement looks highly professional and corporate. You'd be working with the existing content that I have ready. It's important to design the document in a way that effectively conveys our capabilities and experiences in the health sector. Ideal Skills: - Proven experience in graphic design. - Expertise building professional documents. - Capability to work with an existing content and enhance it with visuals and design elements. Looking forward to working with you.

I'm in need of an Electronic Technician who can design a PCB board. I would provide the schematic diagram drawing, dimensions and a bill of material of all the components. All I need is the PCB design in a format that I could send to print. Simulation is a plus. Key Responsibilities: - Designing and developing the PCB board. Ideal Candidate: - Proficiency and experience in designing PCB boards. - Understanding of electronic devices and their components. Please include a detailed project proposal in your application.

I need Altium Designer expert to review the schematic/PCB, change the dielectric material to Rogers RO4003C, resolve DRC issues, correct any issue in the PCB , and ensure that the PCB is manufacturable. The designer should also generate the necessary files required for manufacturing and assembly. The PCB is already routed, but some modifications may be required. The PCB is a simple 6-layer PCB with 2 through-hole connectors, and all other components are surface-mount with 2 or 3 terminals. All changes should be documented in detail.

I'm looking for someone with the right skills to help me design a schematic and PCB layout for an electronic personal gadget. It's essentially a miniaturized, spherical device. Your work will be key to bringing this gadget to life. I need a skilled engineer to design the schematic and PCB layout for a compact video projector encased in a spherical, medical-grade silicone housing. Here are the specifications for the PCB: - The PCB should be circular. - It must have a maximum diameter of 15 millimeters. - The memory should be at least 10 MB, ideally 16 MB, to ensure ample storage. - The memory needs to be capable of supporting PDF files, though text files or images are acceptable alternatives. - The projector should be able to display content like a st...

I'm in need of an experienced electronic embedded system developer to create a cutting-edge blood pressure monitor medical device. The project involves schematic, pcb, firmware development, as well as algorithm creation, testing and monitoring. Additionally, the device should be able to interact with an Android app for display and control purposes. Key features: - Bluetooth connectivity: The device should be able to connect to other devices wirelessly. - Real-time monitoring: The device should provide continuous data so that users can monitor their blood pressure in real-time. The Android app should include: control device and viewing data with scheduling. Regulatory Standards: - CE (Conformité Européenne): The device must adhere to European standards for healt...

I am in need of an expert...firewall feature aimed at facilitating additional system protection. Ideal Skills/Experience: • Extensive experience in antivirus application development, specifically for Windows OS. - Expertise in Windows Kernel Driver Development. - Proficiency in high-level programming with C++/C/C#/Qt, Java, and Python. - Developing apps in C/C++/C#/Qt - In-depth knowledge of low-level operations with X86/ARM Assembly Language. • Knowledge in system security and safe programming practices. • Demonstrated ability to meet tight project deadlines. I require this antivirus software as soon as possible, so the ability to work under time constraints is crucial. Please provide a detailed overview of your proposed strategy and previous relevan...

I'm seeking a skilled electronics engineer for the development of a basic single-layer PCB prototype. Here are the essentials: - This circuit creates a pulse amplitude modulated signal which is amplified at high power. The signal is genrated within the circuit so no user input is required. - This project has been worked on before and an added varible resistor and mosfet will be needed as well as the most important part which is power management which can be done with component selection or circuit alterations. - The purpose is a prototype development, which means you'll be instrumental in bringing my concept to life and preparing it for eventual manufacturing. - The PCB design will incorporate analog components, so expertise in working with these components is...

We are seeking an experienced PCB designer to develop a custom printed circuit board for a Raspberry Pi 4 Model B application. The project requires integrating specific components and ensuring the design can be enclosed within a standard industrial box. The successful applicant must have experience with power management and GPIO pin utilization. Key Requirements: - Experience with Raspberry Pi designs and GPIO pin functions. - Ability to integrate electronic components such as 5V relays into the PCB with high precision. - Familiarity with standard industrial connectors and terminals. This project aims to create a highly functional and reliable hardware system. Only applicants with a strong track record in custom PCB designs and the ability to work to exact specifica...

We're looking for someone who can make a few changes to a PCB using Altium Designer and has experience and an education in electrical engineering. It would also be an advantage if you are familiar with the ESP32C3, creating circuits is not a problem for you, but it is also not a problem for you when troubleshooting, especially in the RF area. Out of discretion, we do not want to post the exact requirements publicly. However, we will send this to you in advance to discuss working hours and price if the requirements match your profile. Thank you

I require a professional with expertise in Electrical Engineering or more fields to design schematic and PCB layout for a mini videoprojector, and a sferic case which I can print.   What I need for this PCB:
- Must be round
- Must have max 15 milimeters diameter (1,5 centimeters)
- The components used should be good quality
- Must have minimum memory capacity of 10 MB (I think 16MB it's more than sufficient)
- The memory must support pdf or text (pdf preferably, but text is also ok or worst case images)
- This minimalistic videoprojector must have an option to project this pdf/text/img in any way (like a normal projector on walls, it's ok if will be smaller projecting final image; or like kids toys, where you are looking into a magnifier and see images)
- I pre...

As someone passionate about electronics, I am looking to create a PCB layout specifically for large, rectangular, tri-color LED display panels - a design that goes from scratch. Here’s exactly what I am looking for: Requirements: - PCB Design expertise with a keen eye for detail. - Handle the complete PCB layout design process, starting from scratch. - Apply knowledge of tri-color LED panel technology in PCB design. - Assist in producing a PCB layout tailored for large, rectangular shaped LED panels. Skills & Experience: - Experience in PCB design & layout. - Hands-on experience with LED technology, specifically tri-color panels. - Proven track record of designing PCB layouts from scratch. - Excellent understanding of var...

...place - as well as RS485 communication. Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and with readable comments). Finally also testing should take please for measure the achievable performance of the proposed and implemented solutions. Please read carefully the attached project sheet with even more details. Looking forward to work...

I'm in need of a PCB design for prototyping purposes. The board's complexity is a double-layer one, and its dimensions are very small, up to 2 inches. The PCB design must be suitable for prototyping, so it should be well-structured, compact and efficient. Key details: - MCU: ESP32 - Interface: Wifi/Bluetooth - Number of sensors to be interfaced: 4 - Type: Prototyping - Complexity: Double-layer - Size: 40mm dia Ideal skills for this project: - PCB design experience, specifically in prototyping - Proficiency in designing double-layer boards - Ability to create compact and efficient designs - Familiarity with small form factor PCBs.

I'm looking for a seasoned electronics engineer to develop a circuit board with a microcontroller wit...power and addressable LEDs, with the design done using EasyEDA software to be fully manufactured by JLCPCB (or equivalent). The core functionality of this project focuses on power management. Your skills and expertise should include: - Comprehensive understanding of EasyEDA software (can take other suggestions) - Proven experience in multi-layer circuit board design - Extensive knowledge in PCB design for power management This project requires intricate knowledge of these areas, so please only bid if you're confident in your ability to deliver. Looking forward to working with experienced and dedicated specialists. Proven portfolio related to power management circui...

I am looking for a specialized electronics engineer with a proven track record in printed circuit board (PCB) design, specifically tailored to handle sensor signals. In particular, the PCB should receive WiFi-based signals from sensors monitoring temperature, pressure, and vibrations. The scope of the project is as follows: 1. **Sensor-PCB Communication:** The maximum distance between the sensors and the PCB would be less than 10 meters. A strong understanding of short-range wireless communication is essential. 2. **Durability:** The PCB design needs to prioritize durability. Please demonstrate past work in creating robust and long-lasting PCB designs. 3. **Equipment Performance Tracking:** The primary purpose of the sensor signals is equipme...

100 Tons Weighbridge controller PCB design with RFID

100 Tons Weighbridge controller PCB design with RFID

...requires a human being to make a turn of the dial or a change of the range. Whoever we hire will be familiar with the process and be able to advise us on solution that will get the job done. The items that we are looking to work with our small test and measurement devices and we basically need the robotic arm to make the then when done, trigger and let our software take over from our software finishes its job it will trigger back to the robotic arm to do edge part. I also need to add that the numbers that will be displayed are digital. But there is no way to read them over the bus. They will have to be read back into a file from a photo optic. Pick up basically as an analog to digital. Bro. I'm seeking an expert in robotics programming to build a program

I'm looking to upgrade my current ESP8266 controller to an ESP32 C3 Mini controlle...Mini controller. I am primarily interested in freelancers with specific experience in this upgrade. Here's what I need: Requirement -1 : 1. Update existing Master Controller board based of ESP8266 to support ESP32 C3 IPEX/ (EasyEDA PCB design) 2. Retain GPIO connections and other circuits and components. 3. Ensure the position of LEDs, buttons and interfaces are as in current design 4. Ensure that the device supports handling loads upto 3A total without any heat with each port support upto 1 A Requirement -2 : 1. Redesign existing Zone Expander PCB board from Eagle to EasyEDA 2. Add LED Power indicator option 3. Ensure that the Expander handle upto 3A without any heating and ea...

I'm in need of a talented PCB designer who can assist in creating a simple but effective PCB for a power supply. Key Responsibilities: Need a Small PCB which will contain NodeMCU, 4 Relay, AC to DC 5v. This board is for home automation project which will connect through WIFI, RF and control all home appliances. Ideal Skills: - Proven experience in PCB design. - Understanding of basic power supply principles. - Proficiency in PCB layout softwares, like Altium or Eagle. This is a straightforward project suitable for a skilled PCB designer looking to take on a quick gig.

I'm in need of a PCB design. The primary purpose of this project is for prototyping a simple layout. Key Requirements: - Design a single-sided PCB layout - The size of the PCB should fit in the small area you see in the attached photo, so it’s a unique shape. - There will be two automotive LEDs that connect to the PCB, so 4 wires, however, the 2x ground works be best connected and then the positive for each light. I’m considering using a magnetic Pogo connector for the output and it would need 4 connections. You’ll see in the second image, the wiring is for an indicator/brake/running led. So the brake/running are connected and it works as such. The running light is a dimmed red LED, then when the brake is pressed the red light brightens...

I am looking for a skilled PCB designer to create a prototype that fits within a medium-sized, 2 to 4 inch space. This PCB should be tailored to contain an Arduino Mini and a 12V to 5V buck converter, with 3 pin and 2 pin JST GH connectors. The configuration of components on the PCB should follow a clustered arrangement to maximize space efficiency. This job does not require mass production capability at this time, with the primary focus being on creating a single prototype. Ideal candidates should have experience with Arduino components and compact PCB design.

I'm seeking an experienced hardware engineer to design a robust PCB which will fully support my Raspberry Pi 3 Model B+. This PCB is planned to be a part of a control system. The main requirements for the project are as follows: • Full Raspberry Pi 3 Model B+ compatibility support - Your design should take full advantage of all the features of this model. • Control system orientation - The PCB down the line will be used as a control system, all design decisions should keep this in mind. This project requires that the PCB has a 110/240 V input and have a 5V Output and 8 Relay Out of 10V. Some basic requirements for candidates: • Strong knowledge in Raspberry Pi and PCB design is preferred. • Prior experience with networking syste...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application.

I need a single-layer PCB designed for a consumer electronics product. It involves the integration of sensors and a timer. Basically,, a very small circular pcb board that has 12 micro led lights. And all lights turn on when double tapping was detected, then last about 10 seconds then lights turned off. Using two 1.5v coin batteries. Just that, nothing less and nothing more. Oh, but it has to be very small. Approximately 30mmx30mm. Thank you Regards

I am in need of an experienced professional who can redraw a PCB schematic from the provided layout created in pcbexpress. Key Details: - I have the PCB design files for reference. - Note that this is a multilayer PCB design, so expecting bids from individuals well-versed in managing and understanding multilayered PCB complexities. Ideal Skills: - Proficiency in using pcbexpress and similar software - Extensive experience in multilayer PCB schematics - Keen attention to detail This project will require excellent skills in technical drawing, interpretation of PCB layouts and thorough understanding of the principles of PCB design. If you have a proven record of similar projects, I encourage you to apply. Please mention your experience an...

I am seeking an experienced and detail-oriented PCB designer to put together a professional, cost-effective, and functional IP camera design. This camera should be capable of: - Night vision functionality to capture distinct images even in an environment with minimal lighting. - Motion detection capabilities to alert me whenever there's movement in its range of coverage. - Two-way audio to let me communicate with anyone within the camera's location. - Deliver 1080p resolution quality images for clear viewing. Given that electricity supply will be consistent, I prefer the camera to be wired. This would prevent the inconvenience of frequently replacing batteries, and also eliminate any reliance on weather conditions that could affect a solar-powered system. Ideal Skills a...

I have a 3D printed enclosure that I need to update based on a revised PCB. Key Requirements: - Increase Size: The enclosure needs to be slightly enlarged, up to 10% larger. - Add Additional Cutouts: New cutouts must be added to the enclosure to accommodate the changes in the PCB layout. - Modify Shape: The shape of the enclosure should be adjusted to suit the new size and cutouts. Ideal Skills and Experience: - Expertise in 3D modeling and printing, especially for enclosures. - Understanding of PCB layouts and how they affect enclosure design. - Proficiency in CAD software for precise modifications. - Good communication skills to discuss and implement the changes effectively.

I'm seeking an experienced Electrical Engineer to meticulously route clock, data, and address signals on a high-speed DDR3 PCB in KiCAD, ensuring the design successfully operates at a target frequency of 1 GHz. Key Requirements: - Expertise in high-speed PCB design, specifically DDR3 - Proficiency with KiCAD - Previous experience working on projects with 1 GHz target frequencies - Experience in impedance control for critical signal paths I have a current board that uses an Allwinner D1 module, and I need to transition it to use the actual SOC, RAM, PMICS, and SD card holder. I need the exact module; it was just placed on the board. The board should be complete in KICAD ONLY. Here is the starting point, you *must* use this as your starting point:

I'm in need of a skilled professional who can help me with a Hardware PCB board implementation of a Buck-Boost converter example as given on Page-21 of the data sheet of LM5176 with a certain small change, viz , The output should be variable between 10V to 28V using a 10K pot. All other parameters remain same as in the circuit. The deliverables will be:- (1) Schematic file (both *.sch and the PDF) (2) BOM (3) Gerber Time duration is 3 working days. Key aspects of the project include: - Implementing the circuit for high power devices - Ensuring the Buck-Boost converter supports input voltage range of 15V to 40V - Optimizing for energy efficiency - Testing and validating the circuit for performance and reliability The ideal candidate should have: - Proven experience in hardw...

Wanting a tattoo design that uses my dental Office logo and/or knife making logo. Tattoo will be on tricep area. I am seeking a proficient tattoo artist to design a traditional-style tattoo that captures personal symbolism for my arm. The design should not just be aesthetic, but narrate my personal story in a unique and appealing traditional style. Ideal Skills and Experience: - Proven experience in tattoo design, specifically traditional styles. - Strong understanding of tattoo placement and design relative to body anatomy. - Exceptional creative abilities to incorporate personal symbolism into design. Expectations: - Original and unique design concepts. - Clear communication throughout the design process. - Revisions until final design meets satisfactory standards.

I need an expert in Arduino programming to develop a script for a 6.0A stepper motor, which will be used to enable the continuous running of the stepper motor in both directions, with a stop command. The motor should reach a maximum of 60 RPM. Key Features: - Variable Speed Control: The syst...both directions, with a stop command. The motor should reach a maximum of 60 RPM. Key Features: - Variable Speed Control: The system should be designed to provide the ability to adjust the RPM between cycles progressively. Ideal Skills for the Project: - Proficiency in Arduino programming - Extensive experience with stepper motors and variable speed controls. - Practical experience in robotic arm operation would be beneficial. If you are the right fit, I'd be glad to brief you ...

We are seeking a highly skilled PCB Designer specializing in power electronics to join our team. The successful candidate will be responsible for designing and optimizing printed circuit board layouts for high-power conversion systems ranging from 20kW to 40kW. This role requires expertise in PCB layout design, simulation of power electronics circuits, and compliance with safety standards and regulatory requirements. Job Responsibilities: PCB Layout Design: Create and optimize PCB layouts using industry-standard design software (e.g., Altium Designer, Cadence Allegro) for power conversion systems. Simulation: Conduct simulations using tools like LTspice, PSpice or MATLAB/Simulink to verify the performance of power electronics circuits, including converters and i...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board as a platform...

I am looking for an expert who can help me develop a comprehensive business model for my shuffleboard tables venture. I aim to both sell and rent shuffleboard tables. The primary focus of this project is the rental arm of this business. - Target Market: The primary clientele for the rental part will be bars, hotels, resorts, games rooms, private households, and small businesses. - Rental Duration: I am looking for long-term rental, with a monthly payment scheme that will allow the renter to generate income through renting the table on an hourly basis to customers. - It should be made clear that the shuffleboard table will in all probability increase customer dwelling time time and in turn have an effect on consumation at the bar area. Ideal candidates should have experience i...

I am seeking an experienced PCB designer proficient with KiCAD. The ideal candidate will have a strong background in PCB design and be able to replicate an Infineon board layout, possibly with minor modifications. Requirements: Proficiency in KiCAD. Experience with PCB design, particularly replicating existing layouts. Strong attention to detail. Good communication skills. Willingness to accommodate minor changes to the original design. Project Details: The task involves replicating an Infineon board layout using KiCAD, potentially with slight modifications to suit our project needs. The turnaround time for this project is tight, so prompt and efficient work is essential.