I2c pwm controller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    4,647 i2c pwm controller jobs found, pricing in CAD

    [login to view URL] pi work with load cell and HX711. [login to view URL] weight value on RPI and get realtime value from load cell. Trigger each relay output for each trigger value. [login to view URL] with HDMI : Realtime value, set weight(5 value for 5 relay output)

    $230 (Avg Bid)
    $230 Avg Bid
    12 bids

    Wireless LAN Controller is mostly configured but APs not getting IP from router WLC configured with 4 VLANS -- VLAN20 is for VOIP, on the LAN not wireless -- VLAN30 1st SSID -- VLAN40 2nd SSID -- VLAN50 3rd SSID 2 Cisco 3502i Aironet Access Points already in LW/CAPWAP mode

    $66 (Avg Bid)
    $66 Avg Bid
    4 bids

    Hi Karthikeyan can you design a pcb for a LED strobe and it should me switch on/off using pwm signals

    $39 (Avg Bid)
    $39 Avg Bid
    1 bids

    Hi, I need to make a character controller like Limbo in a short time. With the same physics and with gearing (grabbing) on the edges of the platform, and with a rope.

    $319 (Avg Bid)
    $319 Avg Bid
    23 bids

    Get email leads from UK AND Luxembourg, Malta, from Those are the industry needed Boat and plane sellers People that work in that field aviation field. Flying boat aircraft Boating & Aviation Aviation Luxembourg Yachthub Horse sellers Horse rank Industrial Equipment supplier Industrials Consumer goods Consumer services Investment management company Funding business company Construction com...

    $439 (Avg Bid)
    $439 Avg Bid
    29 bids

    i WANT A TOTAL VERIFY LEADS FROM DIFFERENT INDUSTRY LIKE: Boat and Aircraft sellers People that work in that field. Flying boat aircraft Boating & Aviation Aviation Luxembourg Yachthub Horse sellers Horse rank Industrial Equipment supplier Industrials Consumer goods Consumer services Investment management company Funding business company Construction company Oil company Vessel Petroleum i...

    $1203 (Avg Bid)
    $1203 Avg Bid
    16 bids
    Fuzzy Logic Controller 4 days left
    VERIFIED

    require a professional which can simulate a Fuzzy Logic Controller system on the matlab

    $208 (Avg Bid)
    $208 Avg Bid
    21 bids

    ...environment: Hardware: Board STM32F407VET6 with Real Time clock crystal MicroSD card slot with SDIO interface USB OTG FS slave to interface with host PC terminal EEPROM with I2C interface SWD/JTAG probe interface Debug Probes : either Segger or ST-LINK/V2 (any of the popular development boards on ebay based on STM32F407VET6 with RTC clock, USB and MicroSD

    $606 (Avg Bid)
    $606 Avg Bid
    15 bids

    ...projects. Needed Information: Emails and Tiles and Company Revenues Email entry per company should be at least 2 to 3 Top Decision makers such as: Managing directors Directors Controller VP President Owner Chief Executive Officer CFO I am giving out First project for 5000 data entry for United Kingdom Oil Companies. There Revenues should be more than USD

    $531 (Avg Bid)
    $531 Avg Bid
    34 bids

    Hi, I need to create a Domain controller machine and another machines where I'll built my application. We've already the 2 machines etc. But we can't connect the machine application to the domain controller. I need to fix this or maybe use Microsoft Ad from aws. (the only thing is that we do not have much users: 2. So AD is much expensive than a micro

    $565 (Avg Bid)
    $565 Avg Bid
    31 bids

    Hi, I need to create a Domain controller machine and another machines where I'll built my application. We've the 2 machines etc. But we can't connect the machine application to the domain controller. I need to fix this or maybe use Microsoft Ad from aws. (the only thing is that we do not have much users: 2. So AD is much expensive than a micro instance

    $12 - $45
    $12 - $45
    0 bids

    ...configure) to accommodate the required functionality. 2. Develop the CPLD/FPGA code. The device needs to take as inputs a set of states (from a microcontroller so either as an I2C command or as a 3 digital input code, along with 3 digital inputs - alarms). The device then needs to set 11 outputs based on a 4 input truth table. 3. A basic schematic for

    $160 (Avg Bid)
    $160 Avg Bid
    16 bids

    The system needs to be as versatile as possible, and modular in design. It is expected to use I2C to control standard digital level control chips. System overview The purpose of the project is to design a flexible digital audio level control and display system for use in professional recording equipment. The system needs to be able to control the

    $3416 (Avg Bid)
    $3416 Avg Bid
    12 bids

    Hi I need an expert to help me to model and simulate a defined controller in islanded microgrid in Matlab.

    $135 (Avg Bid)
    $135 Avg Bid
    7 bids

    ...understands robot control, and how to implement a controller so that according to data from the camera, the robot will take this and be able to adjust it's course. Essentially I want to create a closed loop feedback system between the camera and robot. I believe this is why we need a PID controller? I'm not actually sure how to do this. I use PROS

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    16 bids

    ...tablets produced in China and we modified its housing and few functions. Now we would like to connect a human sensor produced by AKM under model name AK9752. This sensor works on I2C protocol. The CPU of the tablet is MTK 8783. We need to connect this sensor to tablet in order to determine if a client is standing in front of it or not. When human sensor senses

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    31 bids

    I have the vlans built the Firewall configured but the Vlans will not get an IP address.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    2 bids

    An up- and down- counting stopwatch with an LED matrix display has just a few other small features. The software for it has to be written in a month. Please find the details in the attached pdf document. Please read the pdf document carefully and ask, if anything is unclear. Thank you!

    $243 (Avg Bid)
    $243 Avg Bid
    24 bids

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    $66 (Avg Bid)
    $66 Avg Bid
    2 bids

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    $176 (Avg Bid)
    $176 Avg Bid
    5 bids

    ...alarm sounds, etc ([login to view URL]) - Ethernet port ([login to view URL]) - Grove i2c sensor port for future sensors, and area to screw down 20mmx20mm board ([login to view URL]) - Buzzer (from Seeedstudio Open Parts Library - https://statics3

    $673 (Avg Bid)
    $673 Avg Bid
    4 bids

    Need to configure Aruba Wireless Controller to work with hotspot server (AAA server). You can train us if you have an Aruba controller with you (OR) you need to wait for a week to have access to aruba-controller at our customer end.

    $114 (Avg Bid)
    $114 Avg Bid
    5 bids

    ...engineer to create me a schematic with resistor values for a set of components relevant data sheets will be available. I need to ensure the micro controller doesn’t fuse. It is a sensor and a raspberry pi 3B via an I2C. I just need to know the wiring connections and any resistor values. Not a difficult task for an electrical engineer. Please do not bid higher

    $61 (Avg Bid)
    $61 Avg Bid
    2 bids

    A CISCO Wireless LAN controller with about 10 wireless access point needs to be configured from scratch. This is a straightforward configuration. No complicated setup. It should not take more than 1 to 2 hours The successful bidder will need to: 1. Dial in remotely to a PC and install whatever software is needed to access and configure the wireless

    $127 (Avg Bid)
    $127 Avg Bid
    30 bids

    Hi all, I'm working on an ARM assembly source code for a controller: STM32F103RB. The controller itself is available in a devolopment board, this one: [login to view URL] I'm trying to get up and running two separate peripherals: PWM ad USART, but they doesn't ! And I don't know why. I'm looking for an assembly

    $128 (Avg Bid)
    $128 Avg Bid
    7 bids

    ...on Micro controller and Microprocessor. 10. Knowledge of embedded C/C++ and Python. 11. Strong experience on Core Python & Scripting, Linux firmware and driver designing is desirable. Required Experience, Skills and Qualifications Key skill required: C, C++, Embedded Software, Firmware, Embedded system, Python, IoT Protocols, UART, I2C, SPI. Hardware

    $445 (Avg Bid)
    $445 Avg Bid
    16 bids

    I have Windows 2008R2 Domain controller VM that I want to move to a new physical server with fresh windows 2008R2 installed. It has to be done the way that the IP remains the same, and domain member computers won't need to be re-added to the domain ( After all done, old domain controller goes down, the new one comes up and nothing else needs to be done

    $89 (Avg Bid)
    $89 Avg Bid
    40 bids

    I need a responsive website. I would like it designed and built.

    $909 (Avg Bid)
    $909 Avg Bid
    11 bids

    ...need freelancer with following capabilities- 1. STM32F103 Programmer A.) Experience on CubeMX, Truestudio for code generation. B.) Strong hands on CAN, SPI, USART, 1-Wire, I2C, USB Protocols. C.) Ability to works with ADC, GPIO(IN, OUT) and WDT. D.) Prior programming experience in Automotive Domain. E.) Ability to power optimization through programming(sleep

    $521 (Avg Bid)
    $521 Avg Bid
    17 bids

    I need some help with finding an experienced financial controller, or comptroller, to undertake all aspects of financial management, including corporate accounting, regulatory and financial reporting, budget and forecasts preparation, as well as development of internal control policies and procedures.

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    35 bids

    I had experience in UART I2C ADC PWM TIMERS AND COUNTERS. I had experience in automotive domain. Now I am a Embedded software Engineer.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    1 bids

    I recently developed a microcontroller-based lighting controller for an art project with a local artist. It controls 3 x 3-colour LED strips. I also wrote a PC program in JAVA to define how the lights change/fade over time. The PC program has a similar UI to Audacity in that there is a timeline to represent each of the channels (the LED strips).

    $2116 (Avg Bid)
    $2116 Avg Bid
    22 bids

    Hello, I need a 5v relay circuit for arduino designed that can be hooked up to the i2c interface of arduino. It must have an led for that turns on when the relay is closed. it should accept 220v 10amp.

    $128 (Avg Bid)
    $128 Avg Bid
    10 bids

    I have 28 relays for 28 valves , 2 relays for three phase starter, 1 relay for single phase motor. all system operated using sms through android application.

    $268 (Avg Bid)
    $268 Avg Bid
    25 bids

    Hello, I tried to use nodejs (express) along with swagger (swagger-ui-express). However, I don't success to use my [login to view URL] to display most simple response. All I need is a code, which return "hello world" some api. Just for you to understand: "/person" just need to go to relevant javascript code and return "hello world"

    $175 (Avg Bid)
    $175 Avg Bid
    8 bids

    ...environment: Hardware: Board STM32F407VET6 with Real Time clock crystal MicroSD card slot with SDIO interface USB OTG FS slave to interface with host PC terminal EEPROM with I2C interface SWD/JTAG probe interface Debug Probes : either Segger or ST-LINK/V2 (any of the popular development boards on ebay based on STM32F407VET6 with RTC clock, USB and MicroSD

    $1011 (Avg Bid)
    $1011 Avg Bid
    27 bids

    Need assistance to integrate existing drivers or develop cus...product into the Windows environment. Experience required: - Windows device driver integration or development for devices such as USB brides, EEPROMs, DSPs, etc. that use SPI, I2C, or UART. - Full cycle firmware development experience for embedded applications - Experience in Python/C/C++

    $78 / hr (Avg Bid)
    Featured
    $78 / hr Avg Bid
    24 bids

    Hi, I build replacement parts for the older generation Amiga computers originally built by Commodore. I have recreated the Amiga 500 keyboard and want to replace the old controller(Commodore CSG 6570-036 MCU with a newer PIC chip) using a PIC18F45K50T-I/PT microcontroller as a replacement and hopefully be able to incorporate the extra logic circuit

    $111 (Avg Bid)
    $111 Avg Bid
    7 bids

    Needed to write a java controller to call an restful web service and map the response. Need to connect remotely and work on my machine

    $51 (Avg Bid)
    $51 Avg Bid
    27 bids

    we need a code in C, it should be written in Keil compiler with STM32 microcontroller and CMSIS libraries. sample devices for this purpose are JUMO ITRON seies in industry.

    $2954 (Avg Bid)
    $2954 Avg Bid
    31 bids

    I need to build a demo of a high speed calculation on Raspberry Pi 3. I need to calculate a simple set of equations every 10ms. In parallel, I would like to chart the results on a slower basis (updating say 5 times/second). I would like to use an environment like qt or similar for the GUI and charting. I would like to start with advice on the best way to proceed. Additional programming devel...

    $48 / hr (Avg Bid)
    $48 / hr Avg Bid
    17 bids

    We need to control a stepper motor with a simple logic algorithm depending on the reading of two analog pressure sensors.

    $641 (Avg Bid)
    $641 Avg Bid
    39 bids

    I will like to control the pressure in an Autoclave with 2 solenoid valves ( in and out) to keep pressure at a desired value, with an lcd to display pressure and desire pressure, with a stop, start and empty option, but the main is to keep pressure between 5 psi of the desired pressure, I use a pressure sensor and 2 solenoid valves. I could design the circuit I’m looking for some SB to devel...

    $212 (Avg Bid)
    $212 Avg Bid
    42 bids

    ...down * Ability to press up or down button and increment speed by 100rpm * Ability to hold down up or down button to quickly increment speed steps * Segmented LCD display or I2C OLED display to show rpm, preference on OLED...

    $307 (Avg Bid)
    $307 Avg Bid
    4 bids

    I have a server that we are currently using for running quickbooks. I will have a new user in the office with a new computer., I need this computer properly connected to the server, so they are able to utilize quick books and any other functions properly.

    $120 (Avg Bid)
    $120 Avg Bid
    53 bids

    I need some simple code work done using the Adafruit 16-Channel 12-bit PWM/Servo Driver and the below parameters. The goal of the project is to have two servos randomly move between X and Z pulse lengths within a range of seconds and at a random speed. Definable parameters: Time range between movements SERVOMIN and SERVOMAX positions Random servo

    $75 (Avg Bid)
    $75 Avg Bid
    5 bids

    Need to update firmware over the air for STM32F030C8 controller using GPRS . GPRS module used quectel MC60

    $478 (Avg Bid)
    $478 Avg Bid
    5 bids

    We want to replace the proximity sensor of moto e 2nd gen with Srf02 ultrasonic sensor. Both runs on i2c communication protocol.

    $673 (Avg Bid)
    $673 Avg Bid
    7 bids