Fpga vhdl freelancing projects jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    9,301 fpga vhdl freelancing projects jobs found, pricing in CAD
    FPGA load Flash 6 days left
    VERIFIED

    loading a Xilinx SPI flash from external serial source using FPGA

    $560 (Avg Bid)
    $560 Avg Bid
    2 bids
    SPI Master 6 days left

    I want SPI master in VHDL for writing and reading from flash IS25WP032

    $257 (Avg Bid)
    $257 Avg Bid
    8 bids

    ...DE10-Nano board from Terasic. I am trying to changing the FPGA code DE10-Nano board to add our H/W interface to it. I have trouble to get the correct starting point for the FPGA that will be used with Linux. If you are expert with this board, please help us to provide support to us. Who am I: I am a FPGA design expert, but know nothing about DE10-Nano. I

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    5 bids

    About to switch from full time employee into freelancing market & need a UK based accountant to guide me through - I already have first engagement lined up.

    $256 (Avg Bid)
    $256 Avg Bid
    21 bids

    I need to generate a code from C++ to VHDL Using GPU.

    $279 (Avg Bid)
    $279 Avg Bid
    7 bids
    Web development 4 days left

    I just want to know about freelancing

    $152 (Avg Bid)
    $152 Avg Bid
    4 bids

    Urgently need React/ React Native Developers available for freelancing who are present in Noida, NCR. Are looking for a long term contract.

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    23 bids

    Hai i need a experienced laravel developer for create a cms admin panel and need to create a freelancing for content writing in that panel.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    15 bids
    VHDL FPGA Project 4 days left
    VERIFIED

    This Project focuses on the use of VHDL language to describe a simple design and to verify its correct operation through test benches and simulations. The implementation on a specific FPGA has to allow also to obtain additional information of consumption, frequency of operation, etc. In short, it is a matter of following a design process as close to

    $177 (Avg Bid)
    $177 Avg Bid
    5 bids

    ...can type the document from PDF to Word and do proper formatting. Internet knowledge knowledge should be extra Plus. Only freelancer, no company or agency payment only via Freelancing payment system no off site payment. Please note that it will be a part time job not permanent. Please mention your time zone when you are available to work for sure. Only

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    210 bids
    Vhdl project 3 days left

    It is a cluster related vhdl project.

    $381 (Avg Bid)
    $381 Avg Bid
    13 bids

    i already have the 90% of the code just need to finish 10% and guide me on running the code my my board

    $93 (Avg Bid)
    $93 Avg Bid
    8 bids

    Hi Pankaj K., I am looking for a data analyst to join my team. Let me know your interest and how much time you can dedicate to freelancing.

    $11 (Avg Bid)
    $11 Avg Bid
    1 bids

    We are a group of freelancer dealing in SEO for local business. We are looking freelancers to bid on the SEO projects and get us work. Freelancers have the only to take the projects from freelancing sites. We are ready to share 30% commission

    $139 (Avg Bid)
    $139 Avg Bid
    5 bids

    i want freelancers to bid on the digital marketing projects and get me work to do. Freelancers have the only to take the projects from freelancing sites.

    $57 (Avg Bid)
    $57 Avg Bid
    11 bids

    Dear Kariman kamal I am Avi . Architect in profession. I already worked in several freelancing sites and completed several projects. Now I need to build a permanent professional relation. So I was looking for expert Structural engineer . I checked ur profile and felt to give u a proposal to work together in Fiver. It will be my honor if I can work

    $13 (Avg Bid)
    $13 Avg Bid
    1 bids

    this is fairly a simple project let make now if you ca do it i will attach files read that the budget is also good $200 and i need it asap

    $133 (Avg Bid)
    $133 Avg Bid
    9 bids

    this is fairly a simple project let make now if you ca do it i will attach files read that the budget is also good $200 and i need it asap

    $191 (Avg Bid)
    $191 Avg Bid
    5 bids

    ...given two 256*256 synthesized & one SAR real time image. Implementation should be done in Matlab@Simulink and Xilinx@ System Generator environment. Implement above algorithm on FPGA Board & GPU. Simulation results should be demonstrated on MATLAB by comparing MATLAB result with Xilinx@ System Generator result for above specified 3 images with different

    $187 (Avg Bid)
    $187 Avg Bid
    2 bids

    Hi, My name is Papiya Mukherjee from Kolkata, India. Am an English Trainer & Tutor & I ha... I will put in extra efforts to complete my assignments within the stipulated time frame. I take extra care regarding the quality of my work. Please help me with some freelancing options. Looking forward to hearing from you soon. Regards, Papiya Mukherjee.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    Hello We are looking for freelancing candidate who has good knowledge of C#, Html, Dot net core, MVC etc in Microsoft Technology. Our budget is minimum, so looking for fresher also but should have sound knowledge in the above technologies. This requirement is for limited periods in the contract base.

    $35 (Avg Bid)
    $35 Avg Bid
    26 bids
    Design project 13 hours left

    I want freelancing work in Photoshop

    $132 (Avg Bid)
    $132 Avg Bid
    13 bids
    $470 Avg Bid
    5 bids

    Our group wants to implement a game using altera de2 cyclone ii board. Please see the attached file for the details of the game to be implemented.

    $105 (Avg Bid)
    $105 Avg Bid
    3 bids

    Responsibilities: 1. Engaged in ARM embedded software development (zynq7000 platform development); 2. Debugging WiFi driver and USB driver 3. Build and compile the ke... Build and compile the kernel driver environment 4. Realize the interaction between PS and PL 5. Porting algorithms to embedded platforms (including but not limited to ARM, FPGA, etc.)

    $3283 (Avg Bid)
    $3283 Avg Bid
    16 bids

    A very simple processor is designed, need to write vhdl codes(few components already written) for it and implement the microprogrammed Control unit.

    $32 (Avg Bid)
    $32 Avg Bid
    6 bids

    The parking system has 4 levels, level 1 for admins and disabled, level 2 for staff and disabled, level 3 for visitors and disabled, level 4 for visitors.. we two gates in each level (the gate is a pair of IR sensor) , one gate for entrance and the other for exit.. moreover we have camera and monitor near the entrance gate of level 1 , the camera detects the type of car that entering the parking a...

    $119 (Avg Bid)
    $119 Avg Bid
    5 bids

    I am looking for Freelancing Medical Coders.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    6 bids

    The parking system has 4 levels, level 1 for admins and disabled, level 2 for staff and disabled, level 3 for visitors and disabled, level 4 for visitors.. we two gates in each level (the gate is a pair of IR sensor) , one gate for entrance and the other for exit.. moreover we have camera and monitor near the entrance gate of level 1 , the camera detects the type of car that entering the parking a...

    $238 (Avg Bid)
    $238 Avg Bid
    7 bids

    ...deconding and encoding. this will be run on an MyRIO unit so should either be written for this or easily ported from another DAQ system. Ideally it would utilise the RT Module and FPGA Module and operate with as little overhead as possible. The VI should be able the, in terms of the decoder, output a string or timestamp with the current real time LTC timecode

    $462 (Avg Bid)
    $462 Avg Bid
    5 bids
    $13 Avg Bid
    1 bids

    Vhdl is needed

    $36 (Avg Bid)
    $36 Avg Bid
    6 bids

    I am looking for someone to teach me how to be better in freelancing. I am trying to build my portfolio. All I want to do is write. If you are looking for someone who can be a ghostwriter for you, or make really interesting articles. I am your person. I am motivated, and skilled. I learn quickly, and I am very passionate at everything to do with writing

    $18 (Avg Bid)
    $18 Avg Bid
    8 bids

    How does the parking system work? The p...that i am authorized to park only at level 2 and there is only for example 7 vacant lots for staff in level 2. The system is : FPGA ;Nexys 2 spartan 3E, Camera connected to the FPGA, And the monitor connected via VGA to the FPGA, The gates(pairs of IR sensors) in a bread board as illustrated in the abstract.

    $1032 (Avg Bid)
    $1032 Avg Bid
    3 bids

    Need help program FPGA with Artix-7 using Verliog.

    $168 (Avg Bid)
    $168 Avg Bid
    5 bids
    $27 / hr Avg Bid
    3 bids

    ...[login to view URL]). The content also needs to be 100% grammatically correct and easy to read. Make it simple and do not use any fluffy sentences at all. If you are busy with other projects, then please do not bid. If the quality of your work remains fine we will offer you regular work without any hassle. We again repeat we seek for simple and plain grammatically

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    28 bids

    I would like a VHDL code that reads 3 txt file and produces 3 txt file. The inputs text files produced by Matlab in binary. please see the attachment for the code I attempted to do but it not working, and text​ input files.

    $96 (Avg Bid)
    $96 Avg Bid
    12 bids

    ARM firmware with LINUX for DE10-Nano board A. Play with the evaluation board 1. Project Owner will provide a P0496 ARM Processor base on Cyclone V SE FPGA computer board (DE10-Nano board). The board will have Ethernet port and SD card. 2. Developer needs to prepare LINUX Kernel to run on embedded computer board with Ethernet TCP/IP to connect with

    $5450 (Avg Bid)
    $5450 Avg Bid
    21 bids

    ...with 32 bit instructions and 16 bit data, to be implemented using VHDL. In case of any doubts kindly contact to clarify requirements before making offers. Expectations: - seeking sincere and diligent freelancers. - good understanding and practical experience with digital design using VHDL. - use of Vivado Design Suite (Webpack 2017.4) - aligned and meaningfully

    $400 (Avg Bid)
    $400 Avg Bid
    12 bids

    Hey, I need help with Verilog / Vivado FPGA project. I'll send you details.

    $236 (Avg Bid)
    $236 Avg Bid
    1 bids

    Implement the Zen Protocol in the FPGA and update the Mining App

    $1643 (Avg Bid)
    $1643 Avg Bid
    3 bids

    I have a freelancing site with a bug issue and looking for a good developer to fix it. The theme itself is functioning okay, but when a user creates a profile and wants to add his picture on the profile as well as his certifications uploads, it just keeps updating but never uploads the document or picture. These are what i want to get fixed: Need a

    $43 (Avg Bid)
    $43 Avg Bid
    27 bids

    Need help program FPGA to communicate with TI7200 through SPI, and generate 300 and 100 Hz sine waves to drive two electric coils,

    $713 (Avg Bid)
    $713 Avg Bid
    15 bids

    using VHDL: It’s a simple game of ping pong but only one line using the LED lights. the light will go backward and forward, the player needs to click on control at the edge of last two LED to flip the direction of the LED lights, it will start slow and it will speed up as you play, and the seven segment display will display how many time you hit the

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    2 bids

    I need an Android app. I would like it designed and built. The android app is based on finding jobs or posting about jobs internationally and freelancing.

    $1406 (Avg Bid)
    $1406 Avg Bid
    32 bids

    I need about 10 ads created, ready for posting and promoting on social media such as facebook and instagram. My website is a freelancing marketplace. [login to view URL] I need the ads to be creative, attractive, and i need it to recruit users to join my website. For example, people needing a source of income. Or someone that needs to outsource their work. Im

    $32 (Avg Bid)
    $32 Avg Bid
    10 bids

    Hi CleverPen Content, This is not a message to offer you a work opportunity but...aged 20,from India. I just noticed your account and the review. its beautiful and inspiring. I am new here and I don't actually know how to get about getting projects and how to excel at freelancing. So, If you could please give me some tips. Means a lot. Thank you. :)

    $11 (Avg Bid)
    $11 Avg Bid
    1 bids

    Hello, I am in a search for both frontend and backend developers to build a freelancing service website, which is going to be known as "[login to view URL]". The website is going to need a rather large backend infrastructure. Because of my limited funding for the website, it will be a focus of mine to have the core functions of the website built first

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    52 bids

    I need 7 advertising ads for social media, facebook and instagram ready. I need it to represent my service website as a freelancing marketplace platform. My website is aiverr.com. I need the ads to have my logo on it, and i need it to be attractive and catchy to recruit more freelancers to join our site. Best ads will win the content. Thanks in advance

    $54 (Avg Bid)
    $54
    11 entries