Electronics project pcb layout jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,226 electronics project pcb layout jobs found, pricing in CAD

    I am Looking for an engineer that can update the Schematic and PCB of an audio board. Need to Update/add connectors such as MIDI connectors, audio connectors, USB, memory, board size, etc The PCB is in CADstar format, The Schematic is in Orcad format. I have schematics and PCB files, I you have CADstar is a Plus. Our Organization shall keep the rights

    $742 (Avg Bid)
    $742 Avg Bid
    5 bids

    Based on pcb photo make Express pcb file of slightly modified circuit of mosquito racket circuit

    $13 (Avg Bid)
    $13 Avg Bid
    1 bids

    Need only schematic design and BOM file using Altium Designer. I want to make POE circuit design for Raspberry Pi 3. It must be capab...design for Raspberry Pi 3. It must be capable of supplying over 70W power for the device to be controlled. Relevant freelancer who can handle this project smoothly will be awarded PCB design by next project. Thanks.

    $106 (Avg Bid)
    $106 Avg Bid
    2 bids

    ...clean) on a fixed time. We have a Control PCB which has 10 Digital Inputs , 2 Analogue Inputs & 4Digital Outputs in each cleaning system which will work on Modbus protocol to communicate with your software. PC which has the control software is connected to Data transmission unit(DTU) which connects with control PCB in wireless connectivity. Each input status

    $12889 (Avg Bid)
    $12889 Avg Bid
    8 bids

    Pic micro controller to measure 3 phase voltage and current measurement & control the relays based on current readings

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    10 bids

    We will supply files for 4 PCB boards in Altium Designer (Creative Commons) + company logo, and we would need that you add the logo in the boards, then supply the modified Altium Designer files + ODB++ manufacturing files + Gerber manufacturing files

    $40 (Avg Bid)
    $40 Avg Bid
    32 bids

    Need a prototype for a project. My needs are: Hardware * An Arduino based PCB * Two temperature sensors, preferably DS18B20 - The first temp sensor attached to a 1,1 meter long cable -The second temp sensor attached to a 0,2 meter long cable * A GSM shield, preferably SIM900 or other GSM shield that will work world wide * Re-chargable battery, preferably

    $532 (Avg Bid)
    $532 Avg Bid
    23 bids

    Mainscope: Engineering, PCB Layout Design, Embedded Software, prototype - Induction heater Power : 2KW Frequency : 8-30kHz Input Voltage : 350VAC 60Hz Single Edge quasi resonant Dimension : 25 mm x 25 mm x xmm (the depth is independent) Controls: -Current measurement -Voltage measurement -4 digital Inputs -4 digital Outputs

    $2100 (Avg Bid)
    $2100 Avg Bid
    10 bids

    ...similar to the smart watches. The function and design of it is clearly defined and noted, but now I have to do Gerber files like conductor layers... for the company which do the PCB manufacturing....

    $625 (Avg Bid)
    $625 Avg Bid
    28 bids

    I have a project based on raspberry pi 3. I want to make PCB design to customized the raspberry pi board by adding some components/Module in it and also to remove some of unwanted things from raspberry board.

    $318 (Avg Bid)
    $318 Avg Bid
    7 bids
    $48 Avg Bid
    1 bids
    Reverse engineer 4 layer PCB 5 days left
    VERIFIED

    Hi, I am looking to have both the upper and lower PCB reverse engineered. Schematics and PCB layout drawn up. Thanks

    $3224 (Avg Bid)
    $3224 Avg Bid
    22 bids

    I am interested in having a simple breakout PCB board designed. The attached picture shows the preferable dimensions. The overall dimensions are firm, but the hole spacing can be adjusted to meet standards if necessary. Successfull delivery of schematic, PCB, and gerber files will result in prompt payment. Thanks!

    $83 (Avg Bid)
    $83 Avg Bid
    8 bids

    Hi, I need a Freelance Electronic Engineer to solve this issue:[login to view URL] llook mainly at the [login to view URL] and [login to view URL] (phone access and delete and to this (videos) [login to view URL]

    $206 (Avg Bid)
    $206 Avg Bid
    2 bids
    Design a pcb 5 days left

    I have created a prototype board using a Particle Photon. Now I need the board to be designed on a PCB to be ordered online.

    $33 (Avg Bid)
    $33 Avg Bid
    6 bids

    Fabrication of general purpose "Potentiostat/ Electrochemical analyzer" capable of doing analysis most widely used techniques such as Cyclic Voltammetry (CV) and Linear Sweep Voltammetry (LSV), Normal and Differential Pulse Voltammetry, Square Wave Voltammetry, Chronoamperometry Specifications: Potentiostat : CV and LSV scan rate: 0.00001 to 1000 V/s or better Max Current: ± ...

    $183 (Avg Bid)
    $183 Avg Bid
    1 bids
    Custom Touchpad 4 days left

    I need a small touchpad (2cm X 2cm max.) for using on PC. (USB or wireless) We may use a custom printed circuit board (PCB) design and layout or even use a Blackberry trackpad for this purpose. [login to view URL]:[login to view URL] [login to view URL]

    $197 (Avg Bid)
    $197 Avg Bid
    5 bids

    1. THE B...on the t-shirt. [login to view URL] LANYARD Specs for the lanyard: 900mm long x 20mm thick Please design the lanyard with 2 clips in mind (double ended) as that is ideal for balancing the PCB badge. Please provide an image suitable for printing along a lanyard and a preferred lanyard colour. Refer to T-shirt mock-up as the badge will hang on top of it.

    $62 (Avg Bid)
    $62 Avg Bid
    25 bids
    Build a test platform 4 days left
    VERIFIED

    ...anything to show me the results. Im looking to have a complete test platform built that can plug into the upper power plugs and give me a pass fail. I have the schematics and PCB layout for the upper power board however I do not have it for the lower logic board.... although I do not think it is necessary for this application. If you are interested in

    $2878 (Avg Bid)
    $2878 Avg Bid
    19 bids

    Design ESP8266 based device, Gerber files, PCB design, Bill of materials and 5 prototypes needs to be delivered.

    $865 (Avg Bid)
    $865 Avg Bid
    3 bids

    research Bart communication electronics technician appearing for a test for electronics technician. need the appropriate content to prepare and get ready for the test

    $37 (Avg Bid)
    $37 Avg Bid
    2 bids

    need a good pcb designer to make changes to existing altium project changes i will explain in chat

    $78 (Avg Bid)
    $78 Avg Bid
    37 bids

    Hello my name is Hugo and I need a PCB design and printing (it's about a gamepad or game controller [...]). I need a PCB to embed it in a retro-arcade console that I want to make. The PCB would be of the following dimensions: 91.1 x 54.9 mm. I do not care how you want to do it, eye, with little margin of size since they must fit in some pieces printed

    $34 (Avg Bid)
    $34 Avg Bid
    9 bids

    Electronic PCD design for switch with arm/disarm and activate function and RF remote triggering to be used with batteries. I want a design for a PCD board that can run a motor/solenoid when a RF remote button is pushed. The RF remote must have two buttons, one that arms/disarm the device, and a second that triggers the motor/solenoid. The motor/solenoid must not trigger if the 1st button that arm...

    $392 (Avg Bid)
    $392 Avg Bid
    17 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board was able to power up our devices... now, this...

    $598 (Avg Bid)
    $598 Avg Bid
    31 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board was able to power up our devices... now, thi...

    $439 (Avg Bid)
    $439 Avg Bid
    10 bids
    Pcb Testing 3 days left

    Hello everyone, I need a PCB testing program which will be used on [login to view URL] to be simple i need a code which will be used on arduino. Will test my PCB or even a wire connected simple [login to view URL] gave me the results and tell me how many short circuits or open circuits i have.İt will be show up on little lcd [login to view URL] me for more info.

    $29 (Avg Bid)
    $29 Avg Bid
    1 bids

    Phase 2 of Project, Developing firmware to run on custom PCB and interact with sensor module as-well as building custom PCB.

    $767 (Avg Bid)
    $767 Avg Bid
    27 bids
    PCB Design 3 days left

    i have pcb file which placed all components. it is very small pcb and components. I need to be done on Altium designer. i need to need only routing

    $36 (Avg Bid)
    $36 Avg Bid
    13 bids
    PCB design 3 days left

    I want a PCB board to be designed from the circuit diagram.

    $20 (Avg Bid)
    $20 Avg Bid
    48 bids

    ...experienced PCB designer for my project. Project based on ESP8266 with few I2C sensors, relay, needs to be modular, small factor very similar to SONOFF build. There will be two versions of device 220V and US 110V. All design must comply with European, and American electrical industry regulations. Would need Gerber files and diagrams. Whole project will

    $808 (Avg Bid)
    $808 Avg Bid
    8 bids
    $12 Avg Bid
    1 bids

    detail will be share over chat thanks

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    1 bids

    Detail will be share over through the chat. I repeat only From pakistan . Thanks

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    14 bids

    I need to make a simple electronic model which consist of motor, temperature sensor, etc. I want to control the components by using touch screen display. need...to make a simple electronic model which consist of motor, temperature sensor, etc. I want to control the components by using touch screen display. need someone who can design PCB and firmware.

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    18 bids
    $156 Avg Bid
    15 bids

    I need a pcb from an arcade machine that was becoming fashionable and now I want to mount one. I need the button pcb of the MintyPi. You can look it up at [login to view URL]

    $36 (Avg Bid)
    $36 Avg Bid
    3 bids

    About to move to a smaller space & I need someone to sell a multitude of music & electronic equipment, some very specialized items. I need someone to sort through everything & sell most of it on ebay or another sales site to get the best price for some unique items

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    2 bids

    We run an ecommerce store that sells PC peripherals such as headsets, mice, keyboards, and things of the like. We are looking for somebody who has a strong understanding of what PC enthusiasts are looking for in their products and can convey high optimism and appeal to the correct crowd. We want the product descriptions to be engaging, but also have real features and information.

    $409 (Avg Bid)
    $409 Avg Bid
    25 bids

    Bluetooth NRG2 + gryro + chip antenna pulse, small module, component 0.2 0.4 pcb 10mm

    $389 (Avg Bid)
    $389 Avg Bid
    1 bids

    We are producing a prototype device for the IoT Gas & Utility market (using PCB Thunderboard Sense Kits) with stock IoT focussed sensors to capture, relay and perform data analytics. We require software development skills eg squirrel/JavaScript/Java/C/C++ so we can integrate our PCB’s with the IoT IMP Central OS (Electric IMP) platform and include

    $2575 (Avg Bid)
    $2575 Avg Bid
    1 bids

    We have a PCB which has an AD7797 ([login to view URL]) The board has been designed to send information via the AD7797 to the Raspberry Pi. The only driver we can find is a C driver at [login to view URL] We need to have the equivalent to use with Python on the Raspberry

    $320 (Avg Bid)
    $320 Avg Bid
    16 bids
    PCB IOT DEVICE 16 hours left
    VERIFIED

    We need the development of an IOT board with bluetooth technology using STM BLUE-NRG2 chip, an appropriate MCU and a sensor...technology using STM BLUE-NRG2 chip, an appropriate MCU and a sensor who can detect temperature of a specific surface to which it is in contact. (further detail will be provide). The pcb need to be as small as possible. thanks

    $1469 (Avg Bid)
    $1469 Avg Bid
    45 bids

    we have designed a PCB and we need an outer case design for it (plastic), we need someone to support us the design and the files that need for manufacturing. thanks, itai.

    $1250 (Avg Bid)
    $1250 Avg Bid
    52 bids

    i have pcb file which placed all components. it is very small pcb and components. i will attach image of the pcb. I need to be done on Altium designer. i need to need only routing

    $204 (Avg Bid)
    $204 Avg Bid
    47 bids

    Hello,, We are a media research company and we need a solution to detect TV Channel's logo in a live TV transmission and generate metadata of the information. We ne...a media research company and we need a solution to detect TV Channel's logo in a live TV transmission and generate metadata of the information. We need complete software and PCB design.

    $4637 (Avg Bid)
    $4637 Avg Bid
    9 bids

    I need someone to help me how to design and simulate advanced power electronics circuits using PLECS

    $160 (Avg Bid)
    $160 Avg Bid
    2 bids

    I would like to Buy a Simple Billing Web APP for a Small scale Electronics Shop. More details on chat. Thank you

    $288 (Avg Bid)
    $288 Avg Bid
    4 bids

    As discussed before: - taking on the current design of the existing PCB and build from scratch - change components as in excel sheet - check layout recommendations

    $242 (Avg Bid)
    $242 Avg Bid
    6 bids