Electro mechanical engineer for hire jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    7,615 electro mechanical engineer for hire jobs found, pricing in CAD

    See the attachments

    $153 (Avg Bid)
    $153 Avg Bid
    6 bids

    ...different views of a mechanical part, to follow when using Autocad to ensure that i answer the question asked properly by sketchibg the correct view and by placing them in the correct position on the paper in regards to third angle projection.. I will start with 1 job if all goes good will give more jobs.. This is a sketch for me to follow, not a detailed

    $29 (Avg Bid)
    $29 Avg Bid
    23 bids

    looking for engineer to work with to get sketches and CAD 3d drawing of an idea I have. Eventually would like to submit for 3d printing.

    $173 (Avg Bid)
    $173 Avg Bid
    25 bids

    ...arm. The EDC receives electrical power (i.e., an applied voltage) that it must convert into the desired actions. This contest is focused on the electro-mechanical system only (i.e., no internal computing or circuitry) How it works: Initially, the EDC will be positioned at a Handrail, in a ready-to-clamp

    $330 (Avg Bid)
    Featured Guaranteed Sealed Top Contest
    $330 Avg Bid
    0 entries

    we do steel fabrication works, right now we need some one to prepare shop floor drawing for fabricating a shade structure.

    $201 (Avg Bid)
    $201 Avg Bid
    10 bids

    mechanical and product engineer

    $209 (Avg Bid)
    $209 Avg Bid
    57 bids

    I have a .pdf drawing of an enclosure that needs holes and cut-outs machined and labels. I need the drawing converted into 2D and 3D .dwg and .dxf formats. I might need to make some minor changes in the future. I attached the .pdf drawing and the manufactures drawing.

    $87 (Avg Bid)
    $87 Avg Bid
    17 bids

    Need to create career episodes for the process of Permanent Resident Visa for Australia

    $29 (Avg Bid)
    $29 Avg Bid
    5 bids
    Control System Engineer 5 days left
    VERIFIED

    Domestic heating system controller - Assist development of Basis of design Document, selection of hardware and architecture. Must be able to meet in Edinburgh as required

    $829 (Avg Bid)
    $829 Avg Bid
    5 bids

    Local Startup based in San Francisco. We were awarded as one of the 10 best companies like Amazon, Microsoft, and RightScale. Language required: C++ Project Type: Blockchain We need someone who can begin work, within the next 2 hours. Minimum experience 4 years.

    $1978 (Avg Bid)
    $1978 Avg Bid
    16 bids

    Antikythera Robotics Develop Both animatronic for Customize Design and customized Robotic Arms For Customer. This job is about a Concept Design For a exoskeleton For Infantry for a Set. Basic Detail 1. Require the ability to Design a near Realist Exoskeleton. 2. A detail Drawing of Front ,Back and Both side of all part of its individual Detail

    $2723 (Avg Bid)
    $2723 Avg Bid
    25 bids

    We are looking for mechanical drawing for the horn of ultrasonic system. PLEASE DO NOT ASK to provide more information. WE DON'T HAVE ANY DATA AVAILABLE.

    $48 (Avg Bid)
    $48 Avg Bid
    18 bids

    1- Experience in process designing 2- Experience on process deliverable and simulations 3- Experience in Heat & Material balance 4- Experience in Material Take Off (MTO) , bill of quantities (BOQ) and specifications

    $1108 (Avg Bid)
    $1108 Avg Bid
    18 bids

    1- Experience in process designing 2- Experience on process deliverable and simulations 3- Experience in Heat & Material balance 4- Experience in Material Take Off (MTO) , bill of quantities (BOQ) and specifications

    $1174 (Avg Bid)
    $1174 Avg Bid
    7 bids

    I need you to write a research article.

    $184 (Avg Bid)
    $184 Avg Bid
    23 bids

    I need you to write a research article.

    $118 (Avg Bid)
    $118 Avg Bid
    20 bids

    I am looking for a help to solve some simple tasks related to theoretical mechanics. For more details feel free to contact me

    $147 (Avg Bid)
    $147 Avg Bid
    62 bids

    i am looking for a Desk top engineer at Germany. Minimum contract period is 6 months. German language expertise must required. My budget is 3200 usd per month.

    $19306 - $48265
    $19306 - $48265
    0 bids

    I need someone capable of making in Zbrush and deliver the files in STL format for some vehicles. The model will be similar to the one pictured. And I have several more to be done. The new vehicle I need will be the flyer pictured in B/W To accept your offer you need to reply to the following questions: 1) What country are you in? 2) Knowledge

    $398 (Avg Bid)
    $398 Avg Bid
    30 bids

    I need content writer for Mechanical CAD design and Manufacturing services. if any body in your contacts please references.

    $126 (Avg Bid)
    $126 Avg Bid
    32 bids

    I'm looking for a help to solve exercises of mechanics / phyisics about rigid bodies and mathematical analyisis of mechanical systems. The job requires only few hours of work. Please contact me for more details. Thanks in advance!

    $153 (Avg Bid)
    $153 Avg Bid
    54 bids

    1) Window removal with wall in fill and new window install 2) closet resize with pocket door install I need signed drawings for FL permitting. Time is of the essence, must be completed this weekend 7/15

    $330 (Avg Bid)
    $330 Avg Bid
    2 bids

    I want materials engineer is understanding of scientific structures and has research and report-writing skills.

    $32 (Avg Bid)
    $32 Avg Bid
    21 bids

    Description: Software tech. startup seeking senior blockchain engineer. 0-1 years of experience is required, and anywhere above 2 years of experience, is a huge plus. Requirements: - Token creation, conversion and modifications. - Smart Contract, creation. - Backend Software Development and Engineering. We are a software tech. startup based

    $1404 (Avg Bid)
    $1404 Avg Bid
    26 bids

    We urgently need to re-design and re-furbish ovens, hydraulic tables and washing machines for a laminated glass factory

    $8792 (Avg Bid)
    $8792 Avg Bid
    56 bids

    We have a project where we are communicating with a "Black Box". Before we can communicate with it, the Box sends us a 2-byte token to which we have to respond. The response we send is based on the token the Box sends us. We don't know what the algorithm is that’s used to generate the response. The task is to reverse engineering the algorithm used to generate the response....

    $1247 (Avg Bid)
    $1247 Avg Bid
    11 bids

    We are the Manufacturers of Laboratory Equipments. Now we are going to develop an [login to view URL] need a Mechanical Designer who is proficient in Mechanical Designing can approach us

    $437 (Avg Bid)
    $437 Avg Bid
    87 bids

    We need an engineer to help us in a court case buy researching the existence of a particular product and giving their professional opinion on it. Only needed for 1 day.

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    41 bids

    Rewrite and modify report without plagiarism for the Mtech mechanical project. The report will be checked for plagiarism in the Turnitin tool. The document is about 25 pages excluding all the images and tables which need not be modified.

    $114 (Avg Bid)
    $114 Avg Bid
    14 bids

    Design and drafting

    $440 (Avg Bid)
    $440 Avg Bid
    48 bids

    I require someone who can design a PCB for my MX Mount Mechanical Keyboard. Preferrable is the use of KiCad. The Keybord needs to be powered by QMK Firmware and be created with a ATMEGA processor, the keyboard will have LEDs and some functions that will be discussed. Someone who can tweak the QMK firmware would be appreciated.

    $324 (Avg Bid)
    $324 Avg Bid
    13 bids

    I need an application to be made for a job in the Bronx. The work was done already and permits were previously pulled in 1985 but has since expired. The house is a 3 family with a studio apartment. The studio was converted in 1985 but never was inspected. I need new plans/drawings and an application made with department of buildings so the 3 family

    $885 (Avg Bid)
    $885 Avg Bid
    7 bids

    HI Mechanical HVAC CHW SYSTEMS METHOD STATEMENTS AND HVAC CHW PROJECT SCHEDULES in bulk quantity are required 100+ related to various hvac projects for my personal referance .

    $1392 (Avg Bid)
    $1392 Avg Bid
    30 bids

    Hi, I recently bought a wordpress woocomm...like adding products, adding contact details etc. The theme I bought is : [login to view URL] Kindly go through documentation and bid only if you can fulfil all my requirements. Looking for a long term partnership. Sri Lankans are much preferred.

    $29 (Avg Bid)
    $29 Avg Bid
    10 bids

    mechanical cad projects

    $24 (Avg Bid)
    $24 Avg Bid
    73 bids

    Drafting of of PDF documents in A4 and A3 size in Auto cad

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    88 bids

    Solidworks , Mechanical Tank 3D Modeling

    $28 (Avg Bid)
    $28 Avg Bid
    79 bids

    I nee...help with that. Also going to need to make mechanical drawings. Some projects will be roof mounted, some will be ground mounted. Previous experience working on commercial PV projects in the USA is a must. I'll ask to see examples of similar work. I'd like drafting done in Autocad & excel. I'm looking for someone to continually work with.

    $24 / hr (Avg Bid)
    $24 / hr Avg Bid
    37 bids

    Small extraction facility needs stamped plans for concrete to support 22,000 lbs tank, on 8x8 foot pour, tank specifactions will be provided. Soil type: unknown location: Erie Colorado budget: flexible to scope

    $185 (Avg Bid)
    $185 Avg Bid
    31 bids

    mechanical design part modelling, assembly, surface design job

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    43 bids

    ...equipment), similar to lift table but a lot larger (SWL 20Ton) which include electric powered HPU and hydraulic cylinders for Oil and Gas industry. We require experienced hydraulic engineer to check our hydraulic system design drawings. Engineer should able to find failure points in the design. Review the designs and find all the reasons why it will fail. Design

    $771 (Avg Bid)
    $771 Avg Bid
    45 bids

    We required 3 Mechanical Engineers for our Shut Down Work at TCL, Mithapur site. Job Discerption: Dismantling of Existing Raw Mill ESP & Installation, Erection of new Bag Filter. Material Supply is in FLS Scope. Job duration will be 2 Months. 1 Engineering required as Site In-Charge with minimum 7-8 Years Experience in Cement Plant. 2 Engineering

    $508 (Avg Bid)
    $508 Avg Bid
    7 bids

    I Need Electrical engineer to write products descriptions on solar products. As articles require some solid knowledge of solar energy terms so don't apply if you don't have knowledge of solar energy and solar products like inverters, panels and batteries.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    11 bids

    [login to view URL] Please look at these cads.I need about 15 drawings made. Please look at this drawing. [login to view URL] No Name of part W L H 1 Rear sight 10.34 17.9 8.22 2 Front sight 7.86 12.57 4 3 Main spring housing 17.8 52.11 30.2 4 Trigger 13.34 25.47 7.84 5 Slide release 36.68 28.84 13.5 6 Magazine base 14.32 41.62 4 7 Magazine release 14.16 23.87 9.92 8 ...

    $132 (Avg Bid)
    Guaranteed
    $132 Avg Bid
    11 entries

    I am looking for a react native engineer like myself, I'll be heading up the project.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    30 bids

    I would like someone to help further my idea in making a Mechanical lid opener/closer device

    $5830 (Avg Bid)
    $5830 Avg Bid
    32 bids

    design and development

    $127 (Avg Bid)
    $127 Avg Bid
    4 bids

    AutoCAD drawing read and design

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    119 bids

    Hi I'm looking for a person who can work with me for more than 3 years. I don't want high skill, but you need to speak English(not fluently) Preferred Location: Europe and America

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    80 bids

    ...motor has an arm, which has a pin. The pin moves a plunger of a syringe into the syringe for 2-3cm deep. The starting position of the servo arm is as in the picture. The arm will move about 110 degrees clockwise but the engagement with the plunger should only happen for the first 50-60 degrees. What is needed is a 3D model of the plunger in stl and step

    $90 (Avg Bid)
    $90 Avg Bid
    45 bids