Design pcb vhdl ams jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,350 design pcb vhdl ams jobs found, pricing in CAD
    Small PCB design 6 days left

    I need a small circuit board designed to charge a pair of 18650 cells and proform switching. Please contact for more details.

    $117 (Avg Bid)
    $117 Avg Bid
    17 bids
    2in1charger 6 days left

    ...halfway down. Potentially also have logo on a lid at the top, which will click down and be able to rotate 90 degrees so it's pointing up vertically. Have yet to design the circuitry/batteries/PCB as of yet but am in the process of doing so. [login to view URL] Airbuds will be placed at top horizontally

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    9 bids

    ...- language : VHDL - IDE : Quartus Prime Lite Edition - Simulations with ModelSim - mini-project : 0) implement a 1680x1050-60Hz mode VGA controller (operating @ 143Hz pixel clock via PLL) 1) store 280x280 8byte/pixel image to on-chip memory (M9k blocks) 2) read image from on-chip memory (using Altera/Intel's RAM-1Port vhdl IP) 3) output

    $65 / hr (Avg Bid)
    $65 / hr Avg Bid
    1 bids
    Raspberry Pi Hat PCB Design 6 days left
    VERIFIED

    Design a Raspberry Pi compliant HAT with the following specifications LSM9DS1 ==> Gyro , Compass , Accelerometer MCP3808 ==> Analog Digital converter MCP2515 ==> CAN bus controller MCP2562 ==> CAN Driver 16 Mhz Oscillator for the CAN bus 120 Ohm Termination Resistor for the CAN Bus termination selectable via Jumper 10 PCB Screw terminals

    $264 (Avg Bid)
    $264 Avg Bid
    18 bids

    Complete the routing of existing PCB

    $26 (Avg Bid)
    $26 Avg Bid
    8 bids

    Design a simple PCB that will solder directly to the pins on a SCR module, in Gerber format. A sketch is attached. Two diodes will come from the bottom on the two sides and the term block from the bottom on the end.

    $163 (Avg Bid)
    $163 Avg Bid
    8 bids
    LED PCB + Thermal simulation 5 days left
    VERIFIED

    Need help to draw a very simple MPCB, but first i need to figure out some variants with thermal simulation! contact for more info

    $61 (Avg Bid)
    $61 Avg Bid
    9 bids

    ...Develop a PCB that will activate a micropump, and also a microvalve using a microcontroller to control the inflate and deflate cycles reading the pressure sensor. The PCB must use rechargeable battery charge controller to avoid battery issues. Microusb port to charge and download user log data (time/hours used or device activity). The PCB design will also

    $890 (Avg Bid)
    $890 Avg Bid
    15 bids

    Create schematics and PCB design around a specific processor. Details to be provided.

    $1518 (Avg Bid)
    $1518 Avg Bid
    15 bids

    i have attached the document below. And i need this on 21st of october.

    $157 (Avg Bid)
    $157 Avg Bid
    7 bids

    Need someone to design, layout pcb, circuit design and create schematics for an IOT project. Must be familiar with BGA (ball grid array)

    $636 (Avg Bid)
    $636 Avg Bid
    27 bids

    ...have to be ported to VHDL and be integrated before programming the Xilinx V6 FPGA on the transmitter. Complete hardware and many of the software blocks in VHDL are already built by our team. The requirement is urgent. Entire work to be completed in 2 - 3 weeks. Any freelancer with experience in integrating system level codes in VHDL, basics of digital

    $990 (Avg Bid)
    Local
    $990 Avg Bid
    4 bids
    PCB design 4 days left

    I have some two PCB boards that I need to merge. They are both IC chip mostly.

    $26 (Avg Bid)
    $26 Avg Bid
    5 bids

    ...would like to make it square vs the current tilt of images and writing at a left facing angle. I would like to change the wording to read Top line: ServiceNow Bottom line: AMS Strategics Wording should be centered in the banner The blue color in the image should be changed to Fountain Blue R:104 G:161 B: 175 Please keep the same sketched look

    $124 (Avg Bid)
    $124 Avg Bid
    20 bids

    Need an expert in xilinx vivado Projects are based on digital systems on topics such as Multiplexers Flip flops registers Counters Clock dividers Please contact for project instructions and further details

    $175 (Avg Bid)
    $175 Avg Bid
    9 bids

    We would like to find a party that is very familiar with KiCad PCB physical layout and component libraries. PART 1 ------------- We have a four (4) of electronic schematic developed in KiCad and want them to be be laid out into a physical prototype PCB for testing. Board 1 - has 95 components (of which 7 are multiple pin devices) and the balance supporting

    $303 (Avg Bid)
    $303 Avg Bid
    23 bids

    [login to view URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer with atmega8 or atmega328

    $166 (Avg Bid)
    $166 Avg Bid
    1 bids

    Snake Game : 1.) Should run on Altera DE2 Board or on basy3 . 2.) Should Support VGA. 3.)Needed in a 3 days. skills:- verilog software:vivado i need this project in verilog ...: 1.) Should run on Altera DE2 Board or on basy3 . 2.) Should Support VGA. 3.)Needed in a 3 days. skills:- verilog software:vivado i need this project in verilog and not in VHDL

    $102 (Avg Bid)
    $102 Avg Bid
    5 bids
    Trophy icon Updating current Logo 3 days left

    We need an update for our stevedoring company logo. We load log ships all across Australia and need an update from what we currently have which is attached. We still require AMS Stevedoring to be in the title but need a new look. Please see photos of some of our operations for some inspiration. [login to view URL]

    $27 (Avg Bid)
    Guaranteed
    $27
    17 entries
    Firmware For ESP32 Device. 3 days left
    VERIFIED

    ...person that press the button. we want to use a ESP32 Dev PCB [login to view URL] , router and laptop as a network. You will need to create firmware for the dev PCB and a small app for a laptop to communicate with the WiFi Dev PCB. The WiFi Dev PCB has a web server already we should use to manage the

    $188 (Avg Bid)
    $188 Avg Bid
    6 bids

    I want to make something like this [login to view URL] I want basically to test this circuit and code and a small pcb design with SMD parts. I prefer to use atmega 8 or atmega328

    $98 (Avg Bid)
    $98 Avg Bid
    3 bids
    Sd card CID modification 3 days left
    VERIFIED

    I am looking for a freelancer to help me with my project. I want to have possibility to change CID from an SD card. The goal of the project is the applicat...project is the application that can change the CID no of a given SD card. It can be a Linux app, windows console app or combination of hardware (build an micro that changes pcb, CID) and software

    $151 (Avg Bid)
    $151 Avg Bid
    6 bids

    [login to view URL] I want to make something like this I want basically to test this circuit and code and a small pcb design with SMD parts.

    $249 (Avg Bid)
    $249 Avg Bid
    4 bids

    We are looking for someone who is very good with high speed digital layouts. The application is an Ethernet to digital audio motherboard. A daughter card with an Zynq FPGA/processor will install on this motherboard, and the motherboard will install onto a DAC board. There is a development board for this daughter card already. So this motherboard will just be a stripped down version of the developm...

    $2350 (Avg Bid)
    $2350 Avg Bid
    18 bids

    ...experience. A need has been identified, which we have a concept to address. Design a circuit for a small box to enable a small or medium sized business to quickly self-debug some connection issues. We have a PCB designer & a mechanical engineer, we just need a circuit design & prototype. If you are interested, email a response, and an NDA will be sent

    $1991 (Avg Bid)
    $1991 Avg Bid
    9 bids

    SAP ABAP Consultant Relevant Experience: 5+ Years Job Location: Bengaluru Notice: Immediate to 15 Days Mode of Interview: Face to Face (Mandatory) Required skill f...years experience Experience in Core ABAP and Object Oriented Programming Experience in BAPI, RFC, Sap scripts, Smartforms, ALE/IDOC, BDC Experience in Work flow Experience in AMS support

    SAP
    $128 (Avg Bid)
    $128 Avg Bid
    11 bids
    Design PCB 2 days left

    Need an ESP12F based PCB design

    $137 (Avg Bid)
    $137 Avg Bid
    1 bids

    first milestone for circuit design, Gerber files, PCB layout, simulator testing and documents. other support. first milestone is part of overall.

    $131 (Avg Bid)
    $131 Avg Bid
    1 bids

    Hi, I want to combine INA3221 + UP9616 + IIC I2C 0.91" 128x32 white OL...with QuickCharge 3.0 full power even if 8 is 100% load also monitor each voltage and amp I know I can use all pcb on ebay to put this together but I want a custom pcb with all component on it (except 12v power supply) I make an image of each pcb component link together Thanks

    $170 (Avg Bid)
    $170 Avg Bid
    4 bids

    Hi Marek, I am looking for a pic microcontroller with a set of PCB boards. One board should have 5 digital inputs and the other board should have 5 Miniature Relays. Both boards communicate via 2 core cables to a distance of 1000 meters. Operating voltage of the boards to be 12 - 24 volt DC and power source can be arranged on both ends externally,

    $78 (Avg Bid)
    $78 Avg Bid
    1 bids

    Description: - basic processes with PCB (storing process current state, pointer to the current instruction) and calculate I/O yield instructions. - creating new processes per user demand and as many as user requires - implementing one scheduler (but not FCFS) and using it to schedule processes for execution - All these components need to work

    $150 (Avg Bid)
    $150 Avg Bid
    2 bids
    PCB design 1 day left

    Need mechanical and PCB design of 7 cardreaders device based on this example ( picture 1 ) connected via USB chip on board. Board should have 1 USB input and one power 5V input which will power all devices. Will be in use with Sim card size connectors so the output layout should be small. Components will be specified later. For any questions please

    $343 (Avg Bid)
    $343 Avg Bid
    39 bids

    We're looking for an experienced RF circuit designer, one that really knows RF (Radio Frequency) circuits: chips, transistors, tight PCB planes and part placement. Prefer Denver, Colorado area.

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    12 bids
    PCB designer 5 hours left

    Need help for design a PCB, my project should be relatively simple just use some basic electronic and should be output on a large PCB

    $400 (Avg Bid)
    $400 Avg Bid
    68 bids

    Design a pcb in which esp8266-12 will be used to control 5 minimilon relays with all required components ..and get it manufacture and delivered to me

    $169 (Avg Bid)
    $169 Avg Bid
    18 bids
    PCB CHECKER 3 hours left
    VERIFIED

    Need a Professional Report regarding the PCB Layout design. The PCB is in a soft copy layout form. Need to check for the following 1) check for the working of the pcb. 2) is there any noise or disturbances. 3) are the capacitor filters provide sufficient voltage. 4) oscilloscope readings of signals (drops and spikes if any and their corrective measures)

    $47 (Avg Bid)
    $47 Avg Bid
    11 bids

    We are interested in development of hardware based on ESP 32 with Peripherals such as GPS, BLE, WiFi for interfacing with OBD port...WiFi for interfacing with OBD port of vehicle. The freelancer should be well experienced on ESP and would undertake entire project right from the stage of schematic design to complete pcb layout and the firmware writing.

    $3656 (Avg Bid)
    $3656 Avg Bid
    27 bids

    I would like to discuss with freelancers having strong expertise in programming languages like VHDL, Verilog, Matlab, embedded C Please reach out to me. Engineering B.Tech. is must

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    30 bids

    must have experience in esp8266 and programming it

    $64 (Avg Bid)
    $64 Avg Bid
    8 bids

    Hello I am the owner of next Age cycles. I'm looking to have 3 custom pcbs made. The first one is for a brushless motor controller that will have many extra features and run about 200amp high voltage. Also need a BMS for a lithium ion. And I also need a display screen to go along with all of this and have them communicate with each other. More information upon request

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    28 bids

    All must be done to Australian 240V electrical supply standards; 1. Design a small as possible PCB with capabilities to: A: Send a Text Message when power lost to appliance via relay/contactor. B: Receive a Text Message and respond to check power still on to appliance. I have basic models of what i want done, i need someone to do all drawings and

    $197 (Avg Bid)
    $197 Avg Bid
    21 bids

    Hi, We are looking for a developer for developing electronics for the Fisher Price See & Say Toy. (Complete electronics, PCB & Programming). Please check the shared file for the requirement and concept of the same.

    $244 (Avg Bid)
    $244 Avg Bid
    17 bids

    Hi, We are looking for a developer for developing electronics for the Fisher Price See & Say Toy. (Complete electronics, PCB & Programming). Please check the shared file for the requirement and concept of the same.

    $47 (Avg Bid)
    $47 Avg Bid
    4 bids

    ...to ask me series of questions and document any non-obvious design decisions and requirements. The resulting document should also include acceptance checklists for schematics and the PCB design. The resulting document will be used as a description of another project for a freelancer to design the board and prepare it for production. The product itself

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    7 bids

    ...simple small 2 layers PCB (size 85,5x48mm) for interface board with relays. Inside board: 2 relays, 5 SOIC chips (18 legs/16 legs/6 legs/8legs/8 legs). Also some connectors and small SMD parts - like 4 diodes, 4 LEDs, some resistors+capacitors, etc... I have: 1) schema in JPG 2) precise BOM in XLS 3) precise dimensions of PCB with sizes, height limitation

    $43 (Avg Bid)
    $43 Avg Bid
    43 bids

    Intend to get the 4G-LTE Cat1 GPS Tracking Device right from the stage of Schematic designing to pcb layout and if possible also the firmware.

    $1222 (Avg Bid)
    $1222 Avg Bid
    19 bids

    Hi Muhammad T., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I want to capture OBD II data and stream it to my pcb via serial port

    $145 (Avg Bid)
    $145 Avg Bid
    1 bids

    ...wish get hardware design of two weighing scale units that transmit the weight to an IP address 10 times a second. Weight range 20 grams to 20Kg, 2nd device 20Kg to 150kg. Plate size 30x30cm you are welcome split the offer to two and quote for each device separately. We will start order first the the 20gr to 20kg unit design. Design should include full

    $1294 (Avg Bid)
    $1294 Avg Bid
    16 bids

    ...serial number (2 Bytes). CAN BUS Frames is similar but on canbus interfase. I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Hello word MCU (flashing firmware) Receive a

    $38 (Avg Bid)
    $38 Avg Bid
    5 bids

    Looking for a PCB designer who can take on a PCB design created in PADS professional (2.3), change one IC with a different footprint (but same location - no new traces needed) and export the result so it can be opened and edited in KiCad 5 in the future. Your profile: 1) having PADS professional 2.3 license available 2) experience in PCB design 3) experience

    $248 (Avg Bid)
    $248 Avg Bid
    8 bids