Ceilings jobs

This project focuses on the **architectural design and Building Information Modeling (BIM) of a building using Autodesk Revit**. The project involves developing a detailed 3D digital model that integrates architectural elements such as walls, floors, doors, windows, stairs, roofs, ceilings, and furniture. The BIM model is used to prepare accurate **floor plans, elevations, sections, 3D views, and schedules**. It helps improve design accuracy, visualization, documentation, and coordination throughout the building design process. The project demonstrates the practical application of BIM technology in architecture, providing an efficient workflow from initial planning and modeling to the preparation of final construction documentation.

...Section #4. * Verify all wall assemblies, framing conditions, roof geometry, floor and ceiling assemblies, and finish thicknesses against the project drawings and Section #4. * Maintain the same drafting style, line weights, labeling, annotation standards, and level of detail used in Section #4. * Coordinate all visible elements in section, including walls, partitions, openings, stairs, floors, ceilings, roof framing, finishes, and exterior architectural features. * Do not assume or introduce construction conditions that are not supported by the plans, sketches, or Section #4. Any unclear or conflicting information shall be identified before completing the affected area. ### COMMUNICATION If any questions, comments, or uncertainties arise during the drafting process, please...

...and elevations exactly as shown in the provided plans. - Model the house, land, and boundary fences accurately to scale based on the supplied site plan and dimensions. - Ensure the house is positioned correctly on the block with the correct setbacks and orientation. - Create an accurate 3D model of the entire house, including: - External and internal walls - Doors and windows - Roof - Ceilings and plasterboard bulkheads where shown - Kitchen, including the island, base cabinets, overhead cupboards, pantry, and all cabinetry shown on the plans - Laundry cabinetry - Bathroom and ensuite vanities and cabinetry - Built-in wardrobes and all other built-in cabinets shown on the plans - Shelving, niches, and storage units shown on the drawings - Basic plumbing fixtur...

...plaza with parking lot and roads, a main entrance and a separate emergency entrance, reception lobby, corridors, a radiology wing, and a dedicated, secured Gamma Knife treatment room, plus supporting rooms (nurse/security stations). High-quality PBR materials, balanced realistic lighting, soft dynamic shadows, environment reflections, and clean architectural detailing (façade, signage, flooring, ceilings). Correct real-world scale, no clipping/overlaps, and solid first-person navigation (WASD + mouse look) with proper collision (no walking through walls or objects). 2) Doors (must be highly detailed and clearly visible) Realistic doors with fine detail: frames, handles/push-plates, glass panels, access-control readers (badge/keypad), and status LEDs. Multiple door types wi...

...should be completed in the next 45-60 days. Plot plan (have baseline survey), footing, foundation and framing plan, 4 cross sections, 4 wall sections, wall bracing details, 4 side elevations, Residential Energy Compliance Form, cabinet details and elevations, Sprinkler, Plumbing, HVAC, Electrical. We expect that it may take of 4 revisions to get to the final documents. Addn'l info: 9' high (nom) ceilings, vaulted great room, metal roofing, screened porch (rear), covered porch (front), walk out basement (unfinished), 10kw backup generator, 80 gal water pressure tank, drilled well (extg), water pressure booster pump, storm water (gutter) collection to 500 gal cistern Key Requirements: - Expertise in architectural CAD drawings - Experience with residential projects - Abi...

I already have a full Feng Shui layout for my new apartment and want to start with the office. The functional zones, element placement, and energy flow are settled. Where I still need help is with creating a cohesive design that balances functionality and beauty in a small space with no natural light. The room dimensions are as follows: it’s a rectangular space with 10-foot ceilings. I’d like to utilize the height effectively. Here’s what I envision: • An under-counter section about 4 feet tall by 4 feet wide to roll my folded Pilates reformer under daily. Storage above this section can be open format, allowing colors or wallpaper to show through. A textile could be used to hide the reformer when not in use. • I’m considering Ikea for storage solut...

I need a detailed site visit write-up for a commercial property to be used for cost segregation purposes. The write-up should include: - Building Structure and Condition: Overall integrity, any damages, and maintenance needs. - Utility Systems: Condition of plumbing, electrical, HVAC, etc. - Interior Finishes: Quality and state of walls, floors, ceilings, fixtures, etc. - Exterior: Roof, siding, windows, landscaping, and parking areas. The emphasis should be on building structure and condition, utility systems, and exterior. Ideal candidates should have experience in property assessment, familiarity with cost segregation, and attention to detail.

I'm looking for a skilled structural engineer to design the supporting structure for a ceiling-track- suspended body sling for 180 lb disabled man, when the ceiling has a steep slope and the track needs to allow track for horizontal movement (as well as the slings vertical movement) Requirements: - Materials: Nylon - Attachment Mechanisms: Carabiners Ideal Skills and Experience: - Experienc...needs to allow track for horizontal movement (as well as the slings vertical movement) Requirements: - Materials: Nylon - Attachment Mechanisms: Carabiners Ideal Skills and Experience: - Experience with designing and working with adaptations for disabilities - Knowledge of weight distribution and safety in suspended designs - Ability to create design for horizontal supports from steep angle ...

...model must carry through both the schematic design and detailed design phases. Schematic stage Please include the following coordinated drawings generated directly from the model: • Floor plan • Ceiling plan • General arrangement • Wall finishes plan • Furniture plan • Wall partition plan Detailed stage From the same model, produce CAD blow-up details for every interior element—ceilings, walls, columns, floors, bespoke furniture, and any additional fittings—using generic families that can later be swapped for manufacturer content. Each detail should be clearly referenced back to its location in the Revit views. Key requirements • Revit native file (latest stable version) plus exported IFC and PDFs • Clea...

...user—without relying on pgAdmin, psql scripts, or any third-party orchestration tool. Functional scope • Core-wise processing: I want to pin heavy jobs to specific CPU cores from the client side, exposing an API call where I pass a core map and the session adjusts `SET max_parallel_workers_per_gather`, `cpu_tuple_cost`, or similar parameters on the fly. • RAM-wise resource allocation: Memory ceilings should be adjustable per connection so I can bump or throttle `work_mem`, `shared_buffers`, or temp file limits dynamically. • User-wise messaging queues: Each authenticated user gets an isolated message queue (implemented with NOTIFY/LISTEN or a lightweight queue table) so that background services can publish progress, and consumers can subscribe without ...

I’m looking for a designer who can give my 3-bedroom apartment a cohesive modern look without pushing the budget over the edge. Here’s what I need you to plan and visualise: • False ceilings in every room except the kitchen and both bathrooms • RCC shelves with matching doors for all built-in cupboards • A clean-lined TV unit that matches the overall palette • An efficient, ergonomic kitchen layout and elevation • Precise placement drawings for electrical and basic plumbing points so the space works effortlessly day to day Design direction – Overall style: unmistakably Modern, balanced with neutral wall tones so finishes stay timeless and easy to refresh later. – Master bedroom: I want it to feel cozy and comfortable, ...

...residential construction inspections to prepare a comprehensive inspection checklist for residential building projects. Scope of Work: 1. Structural Works Surveying Excavation Backfilling & Compaction Plain Concrete Foundations & Grade Beams Columns Beams Slabs Stairs Blockwork 2. Finishing Works: Waterproofing Thermal Insulation Plastering Floor Finishes (Porcelain, Ceramic, Marble) Gypsum Ceilings Painting Aluminum Works Glass Works Wooden Doors Steel Doors Facade Works External Works & Landscaping 3. Mechanical Works: Plumbing HVAC Fire Fighting Systems (if applicable) 4. Electrical Works: Electrical Conduits & Wiring Electrical Panels Lighting, Switches & Sockets Low Current Systems (if applicable) 5. Final Handover: Testing & Commissioning Final ...

I'm seeking an experienced architect and engineering service to provide permitting plans for a commercial renovation project. Key requirements include: - Upgrading flooring and walls - Re-sheet rock and repair - Removal of existing walls and construction of new walls - Installing new lighting and fixtures - Adding acoustical ceilings - Building a break room - Demolishing an existing bathroom - Replacing mechanical ducts We have layout by the customer. This will be a job that we are in a hurry on as they have limited time to move.

...Color temperature (Kelvin) CRI (Color Rendering Index) IP rating (where applicable) Create a balanced lighting concept incorporating: Ambient Lighting Task Lighting Accent Lighting Decorative Lighting Highlight key architectural features, including: Villa façade Main entrance Double-height spaces Staircase Corridors Living rooms Majlis Dining area Bedrooms Walk-in closets Bathrooms Kitchen Gypsum ceilings Feature walls Landscape and garden Outdoor seating areas Swimming pool (if applicable) Design the exterior lighting to enhance the villa's architectural identity during nighttime while maintaining visual comfort, safety, and energy efficiency. Utilize high-quality LED lighting solutions with long operational life and optimized energy consumption. Design the lighting ...

I need detailed shop drawings for a suspended steel framed ceiling in a commercial building. The design must adhere to specific standards and codes I will provide. Requirements: - Accurate and detailed shop drawings - Experience with commercial ceiling systems - Knowledge of relevant building codes and standar...suspended steel framed ceiling in a commercial building. The design must adhere to specific standards and codes I will provide. Requirements: - Accurate and detailed shop drawings - Experience with commercial ceiling systems - Knowledge of relevant building codes and standards - Proficiency in CAD software Ideal Skills: - Structural engineering background - Expertise in steel framing and suspended ceilings - Attention to detail and precision Please provide samples of sim...

...current accounts and competitors to surface quick wins and longer-term opportunities • Develop a 90-day content and growth roadmap that aligns with our business goals • Produce and publish platform-native posts (short-form video, carousels, Stories, thought-leadership threads) • Manage community interactions promptly and in brand tone • Plan and optimise paid social campaigns when organic ceilings appear • Track KPIs weekly, reporting insights and next steps in a format my leadership team can digest fast Acceptance criteria 1. Growth roadmap delivered within the first two weeks, approved by me. 2. Consistent posting cadence met for all three platforms every week. 3. Monthly report shows measurable improvement in reach, engagement rate, ...

...guidelines, flagging anything that exceeds agreed macro or micro targets, sodium limits, or allergen requirements, and then revise the meals so they pass clinical review. • Create additional seven-day menu rotations from scratch for the same four condition groups once the audit is complete. For every menu set, document calories, full macro split, key micronutrient values, daily and per-meal sodium ceilings, exact portion sizes, and explicit allergen notes, then add your professional sign-off (state and license number included). I plan to share these files with healthcare and community partners, so deliver them in a polished, partner-ready format—PDF is ideal, though Excel or Word is fine if it better supports nutrient calculations. The project is finished when I rec...

We are looking for a creative freelance interior designer to enhance the interiors of our ready-to-move-in 3 BHK apartment. All MEP services, flooring, false ceilings, lighting, fans, wardrobes, kitchen, and other fixed elements are already completed, so no major civil or structural modifications are required. The scope includes space planning, furniture layouts, identifying opportunities for functional and lifestyle spaces such as a pooja/temple, home bar, work-from-home area, Kids bedroom design, decorative niches and display units, along with multiple design concepts, photorealistic 3D renders, material and colour palettes, lighting enhancement suggestions, custom furniture/joinery designs, and detailed execution drawings. The objective is to create a modern, elegant, timeless, a...

...showers * Garage * Air-conditioned plant, battery and server room * Technical equipment, server racks, batteries and inverters * High security walls, gates and controlled vehicle entrance * Tropical landscaping suitable for the Aburi Mountains * Warm architectural lighting throughout VISUAL STYLE The intended style is dark, warm and luxurious: * Dark polished concrete flooring * Raw concrete ceilings and walls * Dark timber cabinetry * Matte-black metal detailing * Floor-to-ceiling architectural glass * Warm concealed LED lighting * Recessed ceiling lights * Premium contemporary furniture * Warm interior lighting against a cool sunset or blue-hour exterior * Dense tropical planting surrounding the pool * Realistic pool water, glass reflections, shadows and material textures I...

...the existing building systems – I will forward the current base-building drawings for you to overlay and tie into. • Coverage of ventilation, air-conditioning, and heating as selected. • A mechanical design certificate stamped and validated by a qualified professional citing full compliance with NCC/BCA and relevant Australian Standards (AS 1668, AS 4254, etc.). The space already has walls, ceilings, lighting, and floor finishes scheduled; the drawing only needs to address mechanical services. PDF for issue and the native CAD file are both required. Turn-around within a week would be ideal, but let me know what you realistically need. If you’re a qualified mechanical designer or engineer based in NSW with commercial fit-out experience who can stamp thi...

I’m refurbishing an existing office and already have the base drawings in digital CAD/PDF format, but the services layers are not on the drawings. I now need fresh, fully-coordinated layouts for data cabling, ventilation, and all electrical/small-power points, desktop power, cable containment in the ceilings and walls. They must be drawn using industry standard key / layouts / legend for UK. You’ll receive the current DWGs along with my mark-ups showing the new partition lines and equipment locations. Your task is to update those files so the services align perfectly with the revised floor plan and are clear enough for contractors to build from. Deliverables • Data cabling layout drawing • Ventilation ductwork layout drawing • Electrical & smal...

I’d like to turn our newly refurbished two-storey office into a brick-built showpiece. You will receive the full architectural drawings and plenty of reference photos so accuracy is firmly in reach. I’m after a faithful, fully detailed representation—façade, stairwell, ceilings, everything—yet the spotlight must land on the open-plan workstations and our casual common areas. Meeting rooms can be hinted at with lighter detail. Choose any modern digital LEGO tool you prefer (BrickLink Studio, LDD, Mecabricks, etc.) as long as the end result uses readily available parts. The footprint should remain display-friendly: no more than roughly 50 cm tall and able to sit on a single shelf. Deliverables: • Digital 3-D model file • Complete parts list...

...to waste each year. The concept is an AI-driven auction site where manufacturers post surplus ingredients and small- to mid-size buyers bid on them before they spoil. Here’s what I need built: • A predictive-pricing engine that ingests lot attributes (grade, shelf-life, volume, historical demand) and recommends starting prices in real time. • An automated-bidding module so buyers can set ceilings and let the system compete for them. • A fraud-detection layer that flags suspicious listings or bidding patterns before a transaction closes. Everything must sit behind a clean, minimal interface—no clutter—because both food and pharmaceutical professionals will be using it every day under time pressure. I’m open on stack, but Python wit...

...need a professionally developed acoustic treatment plan for a large church sanctuary. My priority is to enhance the musical quality we offer every week. We run regular worship services that feature a full band—drums, bass, guitars, keys, multiple vocalists—so the room must flatter contemporary praise music without compromising spoken-word intelligibility. The space is sizeable, with high hard ceilings, long parallel walls, and a generous volume that currently produces a lively but unfocused wash of sound. I’m after a solution that will give definition to drums and electric instruments, preserve warmth for acoustic sections, and keep the congregation’s singing rich rather than boomy. I’m looking for a complete, actionable plan that includes: • ...

I have already sketched a simple main-floor layout for a small, standalone home (no attached garage, 8-foot ceilings, unfinished basement below). Now I need clear, build-ready elevation drawings that I can hand to suppliers and trades for accurate quoting and material take-offs. Scope • Front and side elevations only • Each sheet must show window and door placements, exterior finishes, and the roof profile. • Exterior material preference is wood; feel free to suggest cost-saving species or profiles that still suit a tight budget. • Note any walls that must carry load down to the basement so my builder can place beams/posts correctly. • Call out heights, pitches, and key dimensions so framers and truss designers can pick them up without guesswork. ...

...(exported to DWG) and need it turned into fully resolved working drawings for every wet area in the project—bathrooms, kitchens, and laundry rooms. The base geometry is already in place; what I’m missing are the construction-ready sheets that show exactly how each space is to be built. Scope of work • Use the supplied Archicad/DWG files as the starting point. • Produce detailed plans, reflected ceilings, elevations, sections and enlarged details for all wet areas. • Include dimensions, set-outs for tiling and cabinetry, waterproofing build-ups, fixture and fitting locations, electrical and plumbing rough-ins, material call-outs and any necessary schedules. • Layering, line-weights and annotation style must follow the specific standards I wil...

...materials, finishes, lighting, acoustic treatment, and furniture. Photorealistic 3D renders of all key zones: reception/lobby, open work areas, every manager's office, meeting rooms, boardroom, and the pantry/breakout area. A full walkthrough video of the finished space, moving through all areas in a logical flow. Design direction The base aesthetic is modern industrial meets warm executive. Exposed ceilings with ductwork and black steel, polished concrete floors, warm walnut and timber accents, backlit onyx or stone feature surfaces, biophilic planting, and large windows. Refined in client-facing zones, raw and energetic in work areas. Match the reference images closely for mood and materials. Furniture should blend mid-century modern with industrial. Leather accent chair...

I need an experienced tradesperson who can take my home from damaged surfaces to a polished, move-in–ready finish. The first priority is repairing drywall on both the walls and ceilings; all holes, cracks, and seams must be patched so the surfaces look seamless once painted. With the drywall sound, you’ll move straight into a complete paint job—inside and out. I’m looking for clean cut-lines, even coverage, and durable coatings that will stand up to daily wear indoors and weather exposure outdoors. Finally, the project wraps up with new flooring. I’ll share style preferences and square footage once we connect, but I’m open to your professional recommendations on material selection and installation techniques that balance budget, appearan...

...structural or MEP elements at this stage. Within those architectural details I want all walls and partitions, ceilings and floors, plus every door and window clearly modeled. Everything must sit in perfect alignment with the underlying cloud so that the Revit model can be trusted for downstream documentation. Because this is entirely scan-to-BIM, precision is essential. I will provide the RCP/RCS generated by ReCap along with any project coordinates you require. Please handle any necessary clean-up or segmentation of the cloud before modeling so that the final file remains lightweight and navigable in Revit 2027. Deliverables: • A single Revit 2027 (.rvt) file containing walls, partitions, ceilings, floors, doors, and windows derived from the point cloud • Th...

...site live, you’re the perfect match. Here’s what I’m after: • A real-time virtual tour of the entire property—exterior only immediate surroundings—so I can inspect condition neighbourhood vibe. • The call should happen as soon as we both confirm a time; the sooner the better because the decision is time-sensitive. • During the session, I’ll ask you to focus on specific details (fixtures, walls, ceilings, utilities, street access, etc.) and to pause whenever I need a closer look. • Once the call ends, please send a few clear snapshots of any key areas we discussed for my records (phone photos are fine). A stable internet connection and clear audio are essential. Experience streaming or photographing real estate is a bonus ...

...align exactly with the provided CAD floor plans and title blocks. 2. Symbols follow IEC/ANSI standards and the legend matches the schedules. 3. Load calculations balance phases and respect the local commercial code limits. 4. Final DWG and PDF sets pass an internal QA check with no clash or scaling issues. I will supply: • Base architectural CAD (.dwg) with grids, elevations and reflected ceilings. • Fixture schedule reference sheets. • Preliminary panel‐board schedules for power. Preferred tools are AutoCAD or Revit; if you draft in Revit, please also deliver a clean export to DWG. Familiarity with Dialux or similar for lighting calcs is welcomed but not mandatory. Let me know your estimated turnaround and any clarifications you need so we can get s...

...Content-addressable storage and cryptographic hashes will lock outputs to a single source of truth while slashing recurring API token spend to zero by serving cache hits locally. Milestone 4 – High-Density Stress Testing + Final Handoff We need repeatable proof that 200-page legal agreements flow through the pipeline without memory leaks or API rate-limit errors. Optimise concurrency settings, tune memory ceilings, and leave behind a benchmark report plus clear hand-off documentation. Deliverables (per milestone) • Source code committed to our repo • Automated tests that cover new logic • A short markdown runbook outlining set-up, deployment, and rollback steps • Demonstrable artefact or report showing the milestone objective met Acceptance ...

...the facade, windows, cladding, and design elements around the existing skeleton. Design Style & Elements Required (Based on References): • Modern contemporary straight-line architecture. • Use of large glass panels / double-height windows where possible. • Vertical design elements (wooden/metal louvers or concrete fins). • Material mix: Stone/concrete texture finishes, warm wood aesthetics for ceilings/balconies, and sleek metal. • Balcony treatments with glass railings. • Complete boundary wall design and gate planning. • Landscape planting references and exterior ambient lighting details. Deliverables Required: 1. Complete 3D SketchUp Model (.skp file): Properly grouped, layered, and strictly according to the proportions of the actual site...

We're looking for a builder for a Roblox school roleplay game and wanted to get a quote. Overview The map is a K-12 school campus with three connected wings — Elementary, Middle School, and High School — plus shared common areas. The style is gothic prep school: stone exteriors, ivy, arched windows, dar...areas (built once, central hub): Great Hall (cafeteria) — large, gothic vaulted ceiling, long tables Teachers' lounge Nurse's office Bathrooms Board Room — long table, chairs, presentation screen at one end Style notes Stone + dark wood interiors. Keep classroom walls bare — teachers place decorations in-game. Hallways and common areas can have full gothic character — torches, banners, arched ceilings. Rooms need correct Part n...

...considered) in Gurgaon, including living room and dining area. The project requires minimal civil work, with openness to wall and ceiling treatments and soft furnishings. Flooring will remain untouched. The designer should be Delhi NCR based and, will be responsible for end-to-end design and execution. Project Scope & Key Tasks: Assess existing space and propose design concepts focusing on walls, ceilings, and soft furnishings. Minimize civil work and avoid any flooring modifications. Manage procurement and installation of furnishings and treatments. Coordinate with contractors and vendors to ensure timely execution. Ensure the design aligns with client preferences and functional requirements. Deliverables: Detailed design plan including mood boards and material selections....

...acoustic engineer, acoustic consultant, or industry expert who can guide me through the technical and commercial aspects of this business. Scope of Work 1. Technical Advisory & Product Knowledge 2. Market Research & Competitive Analysis 3. Business Plan Development -Proven expertise in architectural acoustics for office and residential applications -In-depth knowledge of acoustic products: panels, ceilings, diffusers, bass traps, soundproofing materials -Experience with Indian market (preferred) or willingness to research Indian acoustic industry -Strong business acumen with experience developing business plans -Excellent written communication for clear documentation Ideal Candidate Profile Acoustic consultant who has worked on office fit-outs, home theaters, or reside...

I have an office floor plan that now needs to come to life as a fully detailed SketchUp model. It is strictly an architectural interior job; no exterior envelope is required. What I’m after is an accurate representation of walls, partitions, ceilings, built-ins, loose furniture, and basic lighting so I can walk stakeholders through the space and test different layouts. You will receive PDF drawings and reference photos the moment we start. Please keep all geometry clean and grouped, use layers/tags logically, and maintain real-world scale so the file can be exported to LayOut later without extra cleanup. Deliverables • Native .skp file (version 2021 or compatible) • A set of two to three high-resolution perspective renders showcasing key zones I’ll con...

I have interior house photos showing a small painted wall sample/patch. I need someone with Photoshop experience to apply that same color across the full wall areas so I can preview how the rooms would look painted. Keep it simple: Use the sample paint patch as the reference color Apply it to the full wall areas only Keep trim, ceilings, doors, floors, furniture, and windows unchanged Preserve realistic shadows and lighting Return finished edited photos as JPG files only No PSD files needed This is a quick visualization job, not a full interior redesign.

I would like to entrust the installation of drywall partitions and suspended ceilings to an experienced drywall professional. The work includes: • clean and efficient installation of drywall panels, • accurate calculation of required materials before starting, • reading and interpreting my plans or sketches, • providing practical advice throughout the project to ensure a flawless result. I remain available to discuss your methods, timelines, and any specific site constraints. If you are able to adapt your approach to different requirements and deliver high-quality finishing, let’s discuss this quickly.

I'm seeking a skilled lighting designer for my kitchen and dining room in a small luxury condo. The ceiling is concrete, and the junction boxes are uncentered and cannot be moved. Requirements: - Design must be powered by existing junction boxes - Hide...junction boxes are uncentered and cannot be moved. Requirements: - Design must be powered by existing junction boxes - Hide connections and match interior design - Bright and modern ambiance - Support both cooking and dining activities - Open to fixture recommendations (recessed, pendant, track, etc.) Ideal Skills and Experience: - Expertise in modern lighting design - Experience with concrete ceilings and unmovable junction boxes - Strong aesthetic sense to match luxury interiors - Knowledge of functional lighting for coo...

...vertical and corner storage while keeping the modern aesthetic. Each Submission should be duplicated with one with Shaker style cabinetry the other in Flat style (Examples of both are provided in the attached MBR Bath & Closet Listing and Pictures attached). Colors should be in white or light oak. See Admiralty Bend Kitchen attached for color example. Tall cabinetry should extend to the ceilings. • High-level material and fixture schedule (marble or quartz counter tops & backsplashes, designer hardware, tapware, mirrors, sconces, etc.) Prefer sconces cut into the mirror. An example is shown in the above mentioned vanity seat. Should have deep sinks. • Though this is primarily a 2D Floor Plan redesign, photorealistic 3D visuals and rendered elevati...

I need two strong movers to carry a heavy sofa from my ground-floor living room up one flight of stairs and bring the existing upstairs sofa back down. The staircase is wide with good head-height, so there are no tight corners or low ceilings to contend with, but the weight of the piece means the job definitely requires two sets of capable hands and careful teamwork. The whole swap should take about an hour. I’ll clear the path beforehand and be on hand to guide you, but I’m counting on you to provide any basic moving equipment such as straps or a blanket to protect walls and banisters. Deliverables: • sofa positioned in the upstairs room (in position) • Current upstairs sofa set down in the garage room Approx 1 hour work

...looking for an expert in OpenClaw and Claude Code to build a business operating system similar to what Simon Beard has spoken about and demonstrated with AI-powered business operations. The goal is not simply to install software. The goal is to create an AI executive team that helps run and scale my business. Business Elevation Built Pty Ltd Commercial construction contractor specialising in: * Ceilings & Partitions * Carpentry * Doors, Frames & Hardware * Feature Walls & Acoustic Systems * Commercial Fitouts Objective Build an AI operating system where Claude Code acts as the architect, builder and maintainer of the system, while OpenClaw acts as the day-to-day operational interface. I want an AI team that behaves like a real executive and management structur...

...show some inspo picture for the coloring on the cabinets etc. it’s a Galley style kitchen and needs to stay the same Deliverables • 3 perspective renders or a simple 3D model so I can review circulation, sight-lines and overall flow. • white stone countertops • dark metals for knobs on cabinets •separate stove top and oven and smaller microwave on top of the oven. • cabinets go up to ceilings • shorten cabinet size on side with the archway. ( make the cabinets shorter, but bring them all the way up to the ceiling) Please send the final package as PDFs plus the editable source files (AutoCAD, Revit, SketchUp or comparable). The plan should respect clear work triangles, smooth traffic paths and ample counter space. Accuracy and a clean...

I have a full set of product brochures for our PET-based acoustic ceilings and wall panels; all the technical specs, benefits, and visuals are already there. What I’m missing is clear, engaging web copy that translates that detail into a strong brand story. Here is what I need you to craft: • Home page introduction that immediately positions us as the go-to acoustic solutions partner. • A concise but engaging About Us section that highlights our history, mission, and production strengths while boosting overall brand awareness. • Product pages for Ceilings (PET Ceilings) and Walls (PET Acoustic Panels). Each page should lift the most important technical data from the brochures and present it in plain, persuasive language that a specifier or fa...

I'm looking for an experienced architect to design a 30 x 40 duplex house on a west-facing site with a north-facing door. My primary goal is to create a spacious layout with 100% South Indian Vaastu Compliant Key design elements include: - Open floor plan - High ceilings - Minimalist design Ideal Skills and Experience: - Proven architectural design expertise - Strong portfolio showcasing past work - Ability to create spacious, functional layouts - Knowledge of maximizing natural light in west-facing homes Please include examples of past work in your application.

...townhouses with private exterior or shared side-entry alcoves. Eliminate common interior hallways. Vertically align kitchens/bathrooms to use a single "wet wall" per stack. Design for standard lumber spans to cut waste. Section 8 Compliance: Target 110–120 sq. ft. per bedroom. Every bedroom must have an operable egress window (min 5.7 sq. ft. net clear opening, max 44" sill height). Maintain uniform 8’ ceilings. Utilities: 4 separate electric, gas, and high-efficiency HVAC split meters. Tenants pay 100% of utilities. Site Plan: Rear alley access used for a parking pad and screened utility enclosure. Maintain rear mature trees for natural privacy screening....

...headroom above the Kings should still feel comfortable for an adult sitting up. • Standard, readily available lumber sizes (I’m in the U.S.) and off-the-shelf hardware whenever possible. Acceptance criteria 1. All mattress openings measure true Twin XL (39"×80") and King (76"×80") with proper support slats or platforms. 2. Maximum overall height not to exceed 9 ft so it fits rooms with 9-ft ceilings while leaving at least 30 in of headspace on the top bunks. 3. Stairs rated for at least 400 lb load; treads minimum 10 in deep and 17 in wide. 4. Materials list matches drawings exactly and quantities add up with a 10 % overage clearly indicated. If you’ve created similar custom furniture plans before, feel free to share a sa...

I need a full set of interior design detailing for an entire residence, covering cabinetry, staircases, bulkheads, ceilings, built-ins, and every other joinery element from the living areas and kitchen through to bedrooms, bathrooms, hallways, and transitional spaces. The overall vision is clean-lined, contemporary and cohesive, so every drawing must support a modern aesthetic while remaining practical for construction. I will supply plans and concept imagery; you translate these into build-ready documentation—fully dimensioned drawings, material and hardware call-outs, and any 3D views or exploded assemblies that help the contractor execute without guesswork. AutoCAD or Revit files are preferred so the builder can integrate them directly into their workflow. To move forward...

...acoustic engineer, acoustic consultant, or industry expert who can guide me through the technical and commercial aspects of this business. Scope of Work 1. Technical Advisory & Product Knowledge 2. Market Research & Competitive Analysis 3. Business Plan Development -Proven expertise in architectural acoustics for office and residential applications -In-depth knowledge of acoustic products: panels, ceilings, diffusers, bass traps, soundproofing materials -Experience with Indian market (preferred) or willingness to research Indian acoustic industry -Strong business acumen with experience developing business plans -Excellent written communication for clear documentation Ideal Candidate Profile Acoustic consultant who has worked on office fit-outs, home theaters, or reside...