Biztalk ftdi jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    568 biztalk ftdi jobs found, pricing in CAD

    We have an product that runs on FTDI VNC1L (VDAP) and would like to have this run on the VNC2 using modified code. If you have experience with the VNC2 IDE Toolchain and code please get in touch and we can explain the project. Please reply my name "John" so I know you've read this posting. Also include your experience with past code changes you've done with the Vinculum II IDE Thank you! John

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    11 bids

    Need to create a windows driver which would represent 3 Bluetooth services (sent, receive, control) as a virtual serial port (VCOM) in Windows 10. Similar to FTDI devices.

    $532 (Avg Bid)
    $532 Avg Bid
    3 bids

    I'm looking for an embedded programmer capable to write/rewrite code for the CH559 (MCS51 compatible E8051 core microcontroller) or FTDI Vinculum II USB Host IC in order to remap USB Gamepad/Joystick HID data (X/Y/Z/Rx/Ry/Rz/etc) to a predefined UART protocol. There is an existing base code that generate a UART protocol, but the byte array is random and not predefined. This code can be taken as the basis or written from scratch. The project must work and compilable out of the Github SDCC environment postet. MCU Info: CH559 () chip CH559 USB Host Code: FTDI Vinculum II Info: UART protocol specs: SERaero C2-16B attached HID HOST Function Description: attached

    $641 (Avg Bid)
    $641 Avg Bid
    15 bids

    Implement an FTDI FT260 HID USB to I2C interface to communicate to ADCs and DACs along the I2C Bus.

    $209 (Avg Bid)
    $209 Avg Bid
    11 bids

    I need an ESP32-S2 to communicate with an Arduino via serial, as well as upload sketches to the Arduino. (replicate the functionality of FTDI or similar USB-Serial chips) Challenges: ESP32-S2 must connect to the PC using native USB (115200) ESP32-S2 must connect to the Arduino using UART (115200) Must use ESPTinyUSB library (we will provide) I have a proof of concept arduino sketch that we can share. Serial communication works (so, so) but the sketch update fails. Deliverables: The sketch for the ESP32 and accompanying Pro Mini (or similar) arduino sketch. In my testing we used a Pro Mini from Sparkfun and ESP32-S2 from esspresif. This is only one part of the project but we want to expand it once we have this part working, so I would be looking to continue a working relationship ...

    $603 (Avg Bid)
    $603 Avg Bid
    26 bids

    We have developed a carrier board for SBC using NXP iMx8M mini SOM which should run Android. We have reference BSP provided by the SOP vendor which we need to modify. Tasks that need to be done: a. Modify the BSP to provide support for the display and capacitive attached with the datashe...power after boot up. This was recommended by the SOM vendor. We tested this by putting a jumper to turn on that MOSFET. c. Check the functioning of Ethernet, Wifi, Bluetooth. d. We have added 2 Port and 4 Port hubs to provide additional USB ports. This needs to be checked as well. The driver of these ICs is a part of the BSP so should not require changes. e. There are multiple serial ports using FTDI USB to serial converter and they need to be added to the device tree for proper access as a ser...

    $1955 (Avg Bid)
    $1955 Avg Bid
    12 bids

    Responsibilities • Understand requirement and translate that to product features. • Develop Technical solution for complex business problems using Biztalk or any cloud integration services and related technologies. • Should be able to design Microservices and Serverless based architecture. • Should be hands on in Biztalk and implement API using best practices • Should work with vendors and work on integration of multiple systems. • Should work in an API driven/API Led connectivity approach using API principles and standards/specifications. • Should work in designing application including asynchronous programming, multithreading, mutabilit...

    $2 - $7 / hr
    $2 - $7 / hr
    0 bids

    • More than 5+ years’ experience in Biztalk Integration development. • D3656 integration experience. • An understanding of IIS 6 and IIS7. • B2B/EDI (EDIFACT/X12) transaction experience in Order to Cash and Logistics area.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    1 bids

    Hi. We need resource who can support on operation and EDI projects for our BIZTALK Integraion ( Visual Studio 2016 version)

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    2 bids

    Hi all i need a biz talk lead and developers for my project . Pls reach out to me. Biztalk needs.. BizTalk Developer Job Description We are seeking BizTalk Developers who know only knows BizTalk but also understands BizTalk theory, programming, design patterns, and has the ability to mediate between clients, architects, and team members to design solutions throughout all phases of the software development process. Qualifications A University Degree or College Diploma in Computer Sciences or related major 5+ years programming and software development experience 3+ years BizTalk development, 5+ years .NET programming experience Excellent communication skills – both verbal and written Excellent problem solving skills Strong understanding of EA...

    $25 - $212
    $25 - $212
    0 bids

    Help needed to install and configure SMTP server to ...applications. The Hostwind service I have also include unlimited emails for my domain. Currently I have my domain at another host (network Solutions), but when I am ready to start the email service from hostwind, I will transfer my domain to hostwind. Hostwin technical support send me this hyperlink as a guide to do the installation and configuration of the email. You can check this guide. I need help from someone who is very familiar with this process. ALSO: I need to create and validate the SPF records of my email to avoid that my sent emails could be treated as spam.

    $181 (Avg Bid)
    $181 Avg Bid
    16 bids

    Biztalk + asp.net developer with 5+ years experience . Details will be discussed over chat

    $999 (Avg Bid)
    Local
    $999 Avg Bid
    8 bids

    Biztalk asp.net developer with 5+ years experience needed for long term projects will discuss more in chat

    $1103 (Avg Bid)
    $1103 Avg Bid
    5 bids

    I am looking for someone who can help me install Biztalk Server Developer Version Latest Version on my machine.. Upon successfull installation I will create a sample Biztalk server test application, to test the installation, whether the installtion has been done successfully

    $34 (Avg Bid)
    $34 Avg Bid
    1 bids

    ...before they start or simply turn down the project after I award it. Or others that have no idea what the project is about bid and then later turn down the project or delay it long enough that I waste a lot of time. So please don't waste my time and yours. NOTE: Windows 10 based software only. The idea is that FTDI USB/Serial adapters have I/O output pins or DTR and RTS lines that can be programmed using an FTDI library in C or some other language. The source code is available on FTDI I would like to connect two lines to RESET and BOOT0, then while BOOT0 is high, toggle RESET. The STM32 should now be in the bootloader. Now use the commandline version of STM32CubeProgrammer to download a flash program into the processor. Ideally, I would like a simple G...

    $149 (Avg Bid)
    $149 Avg Bid
    4 bids

    Two Projects Project One : I have an existing design to control linear actuators using esp32 and stm32 There are power issues with the board and it needs to be debugged. Also there is a need to add extra debugging ports and test ports Fault find and prototype some elements if needed. -Additional debugging ports as the correct ones are not on there for arduino/FTDI. -PID Control Help/Datasheet(s). -Bom Generation /Pick and place / Pcb Layout/ Silkscreen /3d view **Heavy experience with esp32, stm32 and linear actuators is essential as well asd a knowledge of linear actuators and PID control Project Two : Existing Rpi design -Take away some peripherals - Add Optional Gsm Module - Add Extra power port and power module. - Move around some components. -Add additional Ethernet por...

    $212 (Avg Bid)
    $212 Avg Bid
    10 bids

    I need Biztalk developer support

    $424 (Avg Bid)
    $424 Avg Bid
    2 bids

    Will describe when i enter into a project

    $212 - $637
    $212 - $637
    0 bids

    Will describe when i enter into a project

    $123 (Avg Bid)
    $123 Avg Bid
    3 bids

    Actually, We have the problem about the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE. The task is simple like the following. And you can try to solve the problem through remote control like Teamviewer to our laptop. 1. Task : Please solve the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE Just upload the...about the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE. The task is simple like the following. And you can try to solve the problem through remote control like Teamviewer to our laptop. 1. Task : Please solve the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE Just upload the example code. 2. Environment: Arduino IDE on Windows10 3. Programming H/W: FTDI-232 4. Programming Target Board : ...

    $61 (Avg Bid)
    $61 Avg Bid
    9 bids

    Actually, We have the problem about the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE. The task is simple like the following. And you can try to solve the problem through remote control like Teamviewer to our laptop. 1. Task : Please solve the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE Just uploa...about the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE. The task is simple like the following. And you can try to solve the problem through remote control like Teamviewer to our laptop. 1. Task : Please solve the uploading problem on WT32-ETH01 Board using WT32-S1 with Arduino IDE Just upload the example code. 2. Environment: Arduino IDE on Windows10 3. Programming H/W: FTDI-232 4. Programming Target Board : ...

    $129 (Avg Bid)
    Guaranteed
    $129
    8 entries

    Need a custom PCB combining these 3 components Arduino Nano (including CH340 or FTDI chip - and Mini USB Header) 2 x MCP 2515 - Can Bus 1 x MCP2004A - Lin Bus 1 x MP2307DN-LF-Z - Buck Converter

    $163 (Avg Bid)
    $163 Avg Bid
    9 bids

    Are you Biztalk expert with Dot Net?Yes then we do have an exciting work please do reach me out.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    2 bids

    i am receiving image ,pdf ,documents in BizTalk that's needs to be converted and BizTalk can receive that xml using custom pipeline

    $143 (Avg Bid)
    $143 Avg Bid
    2 bids

    • Experience of working with Azure integrations. • Experience from a Dynamics 365 perspective of some of the following: configuration, security, workflows, plug-ins, custom workflow steps, power apps, • A development background from a .NET/ C# or Dynamics CRM/ Dynamics 365 Customer Engagement. • Knowledge of Azure services such as Azure functions, web jobs, service bus, ...Experience from a Dynamics 365 perspective of some of the following: configuration, security, workflows, plug-ins, custom workflow steps, power apps, • A development background from a .NET/ C# or Dynamics CRM/ Dynamics 365 Customer Engagement. • Knowledge of Azure services such as Azure functions, web jobs, service bus, logic apps, app services, B2C, DevOps. • Nice to haves – Sc...

    $576 (Avg Bid)
    $576 Avg Bid
    3 bids

    ...and the only common denominator is XML. Brief Overview: We are looking to build an application that handles the following: Read folders on a designated FTP Import orders from Folders to a designated API Create outbound XML files to confirm orders (Acknowledgement) Create outbound XML files to confirm shippin In addition we would like the ability to map XML files, like the good old BizTalk. Meaning: We would like to have different read profiles for different customer accounts (FTP Folders) in order to support a variety of XML order files. Speed is of the essence: In order to be able to start receiving XML orders on an FTP server as soon as possible we could explore the option of only doing a read of the FTP and export orders as PDF to a designated email addres...

    $3619 (Avg Bid)
    $3619 Avg Bid
    35 bids

    I need some one who is an expert of working esp32 wroom chip in custom pcb. You should be able to upload firmware using ftdi on rxd and txd.

    $45 (Avg Bid)
    $45 Avg Bid
    11 bids

    The application should continuously read/poll different data from a device. The values should be stored in memory and send via a UDP command to another network destination, if values have changed. Both Modbus TCP and RTU need to be implemented for reading data from the devices. Platform: - Raspberry Pi - Linux - Mac OS X - Windows Destina...necessary) - Devices at the Modbus e.g.: - Values must not be stores permanently. e.g. in a DB - Modbus RTU interface will be: or DSD TECH USB zu RS485 RS422 Konverter Adapter FTDI FT232 Chip for Windows 10, 8, 7, XP and Mac OS X

    $351 (Avg Bid)
    $351 Avg Bid
    4 bids

    We need a quick redesign for our schematic/layout/BOM of two PCBs to update them from CP2102N chips to FTDI chips for programming ESP32 boards. Current design files will be provided to the right Eagle PCB designer.

    $155 (Avg Bid)
    $155 Avg Bid
    7 bids

    I have an idea for a board that plugs into the PCIe slot of a com...and can also write to memory, basically a development board a Xilinx 7 series FPGA chip on it, the board will also need a (jtag) to upload instructions and will need a USB interface for communication. for reference I would like something similar to this product here. here are the requirements for the board. FPGA Chipset: Xilinx 7 Series XC7A35T USB Chipset: USB 3.0 FTDI FT601 Input Voltage: 3.3V supplied from PCIe/M.2 GPIO (Testpoints): 2 pins + GND JTAG: 6 pins JTAG connector for FPGA programming Flash: 256Mb SPI Flash for FPGA self-configuration I am looking for somebody to develop a schematic for this device that i can turn over to somebody else who will design the pcb, thank you in advance!

    $1019 (Avg Bid)
    $1019 Avg Bid
    11 bids

    I need a Windows device driver/handler for an external floppy drive system. I need working code (in Visual Studio or some other common development IDE) where I can add the necessary functions for reading and writing sectors using a filesystem. The external floppy drive hardware is using a FTDI FT240X as the interface chip which can be accessed using FTDI's DLL. I am currently accessing the hardware through the DLL under VB6. The external floppy drive hardware uses sector data from an image file on a SD card. Ideally, I would like to be able to add different file system handlers as modules. However, at first I need to get this to work so mounting drive A: gives you a normal PC floppy drive that you can read/write standard MS-DOS disk images (360K, 720K, 1.44MB). There are...

    $1007 (Avg Bid)
    $1007 Avg Bid
    7 bids

    EU or UK based BizTalk specialist required for 3 month full time contract starting January 2021. This is a remote based contract. Excellent verbal and written English is required. Candidate should have very recent experience of development of the core BizTalk artefacts such as: Maps (developed with xslt rather than mapper UI) Orchestrations Flat-file schemas Custom pipeline components Deployment techniques The selection process includes a video screen shared call, in which the candidate completes an exercise to identify an fault in, and make a correction to a sample BizTalk solution.

    $62 / hr (Avg Bid)
    $62 / hr Avg Bid
    2 bids

    We are looking Microsoft Certified Engineers with following Certification to apply for my company partnership with Microsoft, MS-101 , MS- 203 , MS -500 , AZ - 500 also who has a experience Biztalk , Windows 10 IoT , Azure Devops.

    $19 (Avg Bid)
    $19 Avg Bid
    3 bids

    We are looking Microsoft Certified Engineers with following Certification to apply for my company partnership with Microsoft, MS-101 , MS- 203 , MS -500 , AZ - 500 also who has a experience Biztalk , Windows 10 IoT , Azure Devops.

    $11 - $26
    $11 - $26
    0 bids

    I am looking for BizTalk expert with AS2 experience

    $323 - $969
    $323 - $969
    0 bids

    I have a project that needs a continuous data acquisition, monitoring and storing solution to be build in LabView. It requires initially four simple RS232 and one RS485 driver to be written. There is some documentation available on the driver protocol but it may need work on figuring out the exact wiring and commands back and forth. I am using an industrial type RS232 to USB converter (FTDI chip) and two of the devices are able to talk to the computer. The other two I have not yet luck. This includes the RS485 and the issue maybe correct wiring as the instructions are skimpy (German). The devices are a motor, a temp controller, a Alicat mass flow meter and ph Electrodes. This is for a 6 bioreactor process control, monitoring and display application. In addition ideally I would like...

    $1071 (Avg Bid)
    $1071 Avg Bid
    11 bids

    ...formation scripts for spinning up EC2 instances (. approximately 6 EC2 windows instances) 2. Need to install CRM 2016 on 2 EC2s 3. Install SQL server 2016 on one EC2 instance 4. Automatically Restore a SQL Server backup on the SQL server EC2 5. Install BizTalk 2016 on one Ec2 instance Tasks: Create re-usable Cloud Formation scripts to automatically create EC2 instances for the Windows operating system IN AWS Create a Puppet automation script to install CRM 2016 on windows based EC2 instance in AWS Create a Puppet automation script to install BizTalk 2016 on a Windows EC2 instance in AWS Create a Puppet script to install Microsoft SQL Server 2016 on an EC2 instance in AWS Create a puppet automation script to restore a specified SQL database backfile on to the EC2 insta...

    $572 (Avg Bid)
    $572 Avg Bid
    4 bids

    ...minimize costs (recommendation needed) Misc: Later on a third PCB will be developed (push buttons and display) which needs to be connected to the ESP32 PCB with a cable. ESP32 PCB should be prepared for this Additional PINs from the ESP32 shall be available on the ESP32 PCB as these might be used in future projects. Details need to be agreed upon. Suggestions are welcome. Pins for standard programmer (FTDI UART) should be placed on the ESP32 PCB - Recommendation of readily available programmer? Programming/flashing should be done without e.g. push buttons Plugs/connectors/cables - recommendations are needed Recommendations on how to handle production phase ESP32 pins in use on the current breadboard setup: ESP32 PINs used in Proof of Concept mockup // MODBUS connections #d...

    $646 (Avg Bid)
    $646 Avg Bid
    1 bids

    We need a PCB Layout Designer who can create a PCIE FPGA Board for us. The board should have the following features : XC7A35T Xilinx 7 Series FPGA FT601 FTDI USB 3.0 JTAG Module PCIe Gen2 or PCIe Gen1 See PDF for further information. This project is a repost as the previous freelancer failed to execute this. We have a prototype design that could be used as a base, however the design has a few errors that need to be fixed. Project conditions: You are not going to get paid until at least 1 prototype has been produced and is confirmed to be working as intended. Unless you can build a prototype yourself we will send the final design to a factory which has a lead time of about 4-5 weeks - please take this into consideration before accepting the project.

    $1730 (Avg Bid)
    $1730 Avg Bid
    13 bids

    ...humidity to pressure and light. We are looking for someone to layout for us a simple but effective 4G gateway board. It should have laid out on the PCB: - 2 x eRIC-LoRa modules: - 1 x 4G modem module: - 5V USB Micro B connector for powering the device as well as communicating with the 3 modules using FTDI serial to USB IC. - 3 x SMA antenna connectors. - 5 LED’s (TX & RX on each of the eRIC modules and 1 to show 4G connectivity on the GPY module). - Configurable with our logo and branding, with the ability to create duplicate versions for different customers, using their logo. - To be fitted within this enclosure: : If you think you can help us with

    $1804 (Avg Bid)
    $1804 Avg Bid
    45 bids

    I connect ftdi board to usb and install ser2net and get connection with wintex software with premier 816 panel and i can see the connection from raspberry pi over tcp I want to connect with montex and texbase software to get alarmed

    $177 (Avg Bid)
    $177 Avg Bid
    2 bids

    Hi We are developing credit products for Mpesa in Africa. We currently use a proprietary platform which which comprises and API gateway, orchestration platform and USSD gateway all wrapped up into a single product thatr enables us to build services through configuration of the platform. We are interested to hire a team of people with experience i...are developing credit products for Mpesa in Africa. We currently use a proprietary platform which which comprises and API gateway, orchestration platform and USSD gateway all wrapped up into a single product thatr enables us to build services through configuration of the platform. We are interested to hire a team of people with experience in products like Apigee, Kong, WS02, Mulesoft, Tibco, Biztalk, Api Configuration and other similar ...

    $65 / hr (Avg Bid)
    $65 / hr Avg Bid
    11 bids

    We want to connect 2 Windows computers to each other using RS485 cables from FTDI. () One computer should act as a Modbus master device, the other computer should act as a Modbus Slave device. On the master computer, we need simple software which sends and receives values from single registers (coils or registers). The Slave device should respond. The deliverables are - two FTDI cables connected together to make a modbus cable - source code to for both slave and master computer showing a simple sequence of operations showing setting a register value and reading back a register. - code compiled into an .exe - If the software could be written in Labview then that would be an advantage, if not C/C++/C#.

    $1075 (Avg Bid)
    $1075 Avg Bid
    11 bids

    We need a PCB Layout Designer who can create a PCIE FPGA Board for us. The board should have the following features : XC7A35T Xilinx 7 Series FPGA FT601 FTDI USB 3.0 JTAG Module PCIe Gen2 or PCIe Gen1 See PDF for further information.

    $5337 (Avg Bid)
    $5337 Avg Bid
    7 bids

    This project is to create a user-friendly application to program various FTDI USB converter chips. There has been some work done on this by others. The idea would be to add a GUI and expand the range of devices. This project would be completed with C and Glade on a Linux Ubuntu 20.04 platform and is open source. Your skills will be in the software of hardware interfaces. Please see accompanying documentation.

    $65 (Avg Bid)
    $65 Avg Bid
    3 bids

    Dear Candidate, We are hiring for Biztalk Developer position. Key Attributes: Experience: 5-9 yrs 1. Minimum 3 yrs of experience in Biztalk x12 development. 2. Hands on experience in HL7 (Healthcare domain). Thanks and Regards, Vidya Saudagar

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    2 bids

    We need a Biztalk administrator to help us to fix an issue when we are sending signed and encrypted message to a partner, we have configure a send port HTTP, at this point we are able to receive signed and encrypted message from the partner but not send.

    $48 / hr (Avg Bid)
    $48 / hr Avg Bid
    6 bids

    I'm having issues sending signed and encrypted message to a partner, we have send port HTTP, we are able to receive signed and encrypted message from the partner.

    min $65 / hr
    Urgent
    min $65 / hr
    0 bids

    Hello. There is an FTDI driver that supports OS: Windows 2000, XP, Server 2003, Vista, Server 2008, Windows 7, Server 2008 R2, Windows 8, Windows 8.1 and Server 2012 R2. You need to update it to work under Windows 10. The source code of the driver is attached. The driver is built using the framework and has many ready-made utilities for performing the task on the site Unfortunately, little is known about the specifications of the device. If you still need some additional info, we will get it together from the code and other possible sources ?

    $1937 (Avg Bid)
    $1937 Avg Bid
    1 bids

    Hello. There is a FTDI driver, you need to update its signature for Windows 10. The source code of the driver is attached. Unfortunately, little is known by the specifications of the device, but I think that this is not particularly necessary for signing. If you still need something like that, we will get the info together from the code and other possible sources.

    $286 (Avg Bid)
    $286 Avg Bid
    6 bids