Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,798 Leds jobs found, pricing in CAD

    ...through the 8 different colors that you get by mixing the Red, Green, & Blue. Use a delay of 500ms between them. 2. Write a program that implements an 8 bit up counter on the 8 LEDs. Increment the counter every second. 3. Write a program that displays -OU- on the four 7 segment displays repeatedly. You will need to use the multiplexing technique on the

    $228 (Avg Bid)
    $228 Avg Bid
    6 bids
    We Reklam&Organizasyon 5 days left
    VERIFIED

    Sign, Leds, Posters, PVC, cards, magazines, books...

    $568 (Avg Bid)
    $568 Avg Bid
    8 bids
    Trophy icon Design me a Logo for a dance hall 4 days left

    ...old & modern. The Location is a lot of wood, deer antlers, skins, so the direction Black Forest or Black Forest Style or Alpsland-look but mixed with modern lounge furniture, LEDs, etc. Maybe you can imagine that. We live here in the Black Forest, where you eat flame cake on boards :-) So much for us. The logo should therefore be adapted to the style

    $37 (Avg Bid)
    Guaranteed
    $37
    13 entries

    ...charge and download user log data (time/hours used or device activity). The PCB design will also accommodate future BLE module. One button power on, and also display on (3) LEDs the battery charge, and maybe some other stuff like (optional BTLE pairing). PCB 1.7mm thick, Size 42*58mm Need complete files for prototype PCB and full device prototype

    $894 (Avg Bid)
    $894 Avg Bid
    15 bids

    Hello, ...battery data sheet) 3. Illuminate led when battery output voltage is at x.x volts (to be specified) 4. Except an input from a latching switch 5. Soft start and shut down LEDs 6. Turn LEDs off after a time ( to be specified) 7. Provide output signal to motor controllers 8. stop operation when battery voltage is at X.X volts (to be specified)

    $843 (Avg Bid)
    $843 Avg Bid
    44 bids

    I have fully working Arduino web server temperature controle. All settings are set trough web page and also displayed ONLY on web page. Curently it...shield. Problem is when there is no inthernet.. I need the code to be converted to be able to set values trough menus on cd and also to be displayed on lcd. It could use also leds to display status...

    $53 (Avg Bid)
    $53 Avg Bid
    16 bids

    ...sockets; Board 3 - has 9 components (of which 2 are multiple pin devices) and balance supporting components and sockets; Board 4 - has 13 components (of which 3 are multiple RGB LEDs) and balance supporting components and sockets; We will require the files, libraries and Gerber Data for the above. Part 2 ----------- After Part 1 we will also want the PCB

    $304 (Avg Bid)
    $304 Avg Bid
    23 bids

    ...will use its two relays to turn on LEDs and one button to be trigger on/off . The app for the laptop is to manage and log data time of WiFi Dev pcb buttons on the network . When a button is press of a regested button the App will calculate the fastest button and turn of any other button and pulse the relays to flash LEDs, and disable any other buttons.

    $177 (Avg Bid)
    $177 Avg Bid
    6 bids

    complete scoreboard system, remote controls, controller boards, 3 sizes of 7 segment, 2 sizes of dot matrix, all in high brightness RGB leds. My boss has one quote from a reputable engineer of 3 months for the lot from start to finish. This would be the same man that created the earth in 7 days? I would like some quick realistic ideas if the time scale

    $13064 (Avg Bid)
    $13064 Avg Bid
    9 bids

    ...sensor: a. SW-420 vibration sensor module OR b. MPU-6050 3 axis Accelerometer/ Gyrometer 6. 28BYJ-48 5 volt Stepper Motor 7. ULN2003 stepper motor driver board 8. Green and Red LEDs 9. Wires and resistors as necessary Deliverables: 1. Arduino code for the requested tasks in a .TXT and/ or .INO file format 2. Schematic similar to the attached file: Deadline:

    $199 (Avg Bid)
    $199 Avg Bid
    22 bids

    ...knowledge in such industry to help in establishing the business for all perspectives e.g. design of the factory, identify the suppliers of raw materials (photo diodes, IR/RED LEDs, fabrics, silicon rubber, etc) and to help in designing the molds and recommend the sensor materials. The individual has to have the knowledge of regulations, standard and

    $2923 (Avg Bid)
    $2923 Avg Bid
    10 bids

    Consider the leds (the little lights) on your raspberry pi. These lights can be changed by sending messages to the device about how to behave. The first script you are to write (which you must decompose into smaller scripts/functions) is to allow a user of your script to manipulate the leds on your pi. When the script starts up, it will scan the

    $157 (Avg Bid)
    $157 Avg Bid
    9 bids

    ...5x48mm) for interface board with relays. Inside board: 2 relays, 5 SOIC chips (18 legs/16 legs/6 legs/8legs/8 legs). Also some connectors and small SMD parts - like 4 diodes, 4 LEDs, some resistors+capacitors, etc... I have: 1) schema in JPG 2) precise BOM in XLS 3) precise dimensions of PCB with sizes, height limitation, mounting holes, and already

    $43 (Avg Bid)
    $43 Avg Bid
    43 bids

    ...BUS. You can receive 5 frames: Left Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows and central LEDs (2 Bytes) Brightness level (1 Byte). General Adjust PWM (10 steps 10%-100%) State requirement. Returns the model and serial number (2 Bytes). CAN BUS Frames is similar but

    $38 (Avg Bid)
    $38 Avg Bid
    5 bids

    ...these to control two LEDs. Each LED needs to have an independent on/off timer that turns the LED on after a random delay of 5-30 seconds, then keeps it on for a random time period of 30-90 seconds, then turns it off again. Both timers (one for each LED) need to be independent and use different random delays. Also, when LEDs come on or turn off, the

    $142 (Avg Bid)
    $142 Avg Bid
    14 bids

    ...word MCU (flashing firmware) Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will report you by email. You can also watch the pcb via webcam or the ide by teamviewer

    $435 (Avg Bid)
    $435 Avg Bid
    4 bids

    ...board runs on 3.3V for logic levels and power supply. The display uses offset voltages of +20V, -6.8V, +11V that need to be generated. The backlight consists of on string of LEDs that need to be driven at 9.6V with 160-180mA. The parallel RGB input comes from a 40 pin, 0.5mm pitch FPC with typical control signals, the LVDS ouput is another 40pin0.5mm

    $219 (Avg Bid)
    $219 Avg Bid
    7 bids

    Continuity tester Circuit Design with part list. 4v AC continuity tester...tester. Low powered, 5 stage LED Continuity tester. Which is powered and tests the resistance between the 2 AC wires. Depending on the resistance between the 2 wires , one of 5 LEDs will turn on. Secondary power by 3 volt button battery for when no AC voltage is supplied.

    $206 (Avg Bid)
    $206 Avg Bid
    20 bids

    ...have some basic sketches on hand to give you an idea but I feel they might be better designed. Basically I have a 40mm outer diameter tube (main body) which will have some leds and other electronics in it. I then need to have a removable attachment system on top (2) that can pass 5v and a data wire to the attachment (1) The attachment (1) will be

    $41 (Avg Bid)
    $41 Avg Bid
    47 bids

    ...have some basic sketches on hand to give you an idea but I feel they might be better designed. Basically I have a 40mm outer diameter tube (main body) which will have some leds and other electronics in it. I then need to have a removable attachment system on top (2) that can pass 5v and a data wire to the attachment (1) The attachment (1) will be

    $9 (Avg Bid)
    $9 Avg Bid
    1 bids

    Four PWM signals from Arduino, running around 30khz to 60khz. right now, the pwm controls four mosfets directly and they control leds light. need to convert pwm to analog signal and then connect to mosfet. should be able to design PCB for the circuit.

    $186 (Avg Bid)
    $186 Avg Bid
    28 bids

    Hi Zain Ul Aabidin L., I noticed your profile and would like to offer you my assignment(Scripting LEDs on a Raspberry pi). We can discuss any details over chat.

    $189 (Avg Bid)
    $189 Avg Bid
    1 bids

    I need an arduino code for a four button, combination to trigger a relay. I would like 4 LEDS. One LED for each button, when the button is pressed, a corresponding LED lights. When it is idol, i would like it to flash the LEDs randomly. I would also like a buzzer the sound.

    $138 (Avg Bid)
    $138 Avg Bid
    20 bids

    ...wireless transmission device? (at least 20 feet, no more than 200 feet). (1+1 backup) On right side, arduino needs at least 10 inputs, 4 of which will be Tx,Rx, 3 will be for LEDs, and 3 will be for buttons. Which to pick? Need strong screen for displaying at least seven lines of text, and that arduino can tie into. Options? Doesnt have to be color

    $184 (Avg Bid)
    $184 Avg Bid
    5 bids

    I need a game button via WiFi to show the fastest per...The app for the laptop is to manage and log data time of WiFi Dev buttons on the network . When button is press the App will calculate the fastest button and turn on and flash LEDs and relay I/O of that WiFi Dev PCB. Also allow a reset of the the LED via the laptop App. but the ESP32 looks better

    $292 (Avg Bid)
    $292 Avg Bid
    6 bids

    I need a game button via WiFi to show the fastest person that press the button. ...The app for the laptop is to manage and log data time of WiFi Dev buttons on the network . When button is press the App will calculate the fastest button and turn on and flash LEDs and relay I/O of that WiFi Dev PCB. Also allow a reset of the the LED via the laptop App.

    $26 (Avg Bid)
    $26 Avg Bid
    1 bids

    ...this: [login to view URL] I want to store pictures onto the NanoPi NEO Air Pictures will be sent over bluetooth to my phone app. I want to also connect 1 meter of these leds: [login to view URL] we will have a digital number display: [login to view URL] and 5 smd buttons for control [login to view URL] will also have another pcb made

    $49 / hr (Avg Bid)
    $49 / hr Avg Bid
    12 bids

    We're using a PCB connected to an adafruit bluetooth feather board to power LEDs and to charge an iPad. We have a few designs that aren't working well, and are in need of someone to produce an improved design that fits our requirements. The board just needs to power LED lights, charge an iPad, and connect to a bluetooth component with firmware.

    $626 (Avg Bid)
    $626 Avg Bid
    24 bids

    ...wireless transmission device? (at least 20 feet, no more than 200 feet). (1+1 backup) On right side, arduino needs at least 10 inputs, 4 of which will be Tx,Rx, 3 will be for LEDs, and 3 will be for buttons. Which to pick? Need strong screen for displaying at least seven lines of text, and that arduino can tie into. Options? Doesnt have to be color

    $260 (Avg Bid)
    $260 Avg Bid
    2 bids

    ...an ATTiny10 microcontroller to flicker two LEDs in a random fashion that simulates a real-world candle flame. The code needs to treat each LED as its own "candle", so this is essentially two independent flickering routines. This is different from some implementations where one "candle" consists of two LEDs inside a single housing (where the "flame"

    $194 (Avg Bid)
    $194 Avg Bid
    8 bids

    This project consists in build a stand Alone Arduino Mega2560 + Ethernet module in one PCB. Ethernet module Wiznet 5200. This PCB need LEDs to indicate power supply and power supply input is 24VCC. And need a USB interface similar to Arduino mega 2560. This project is a similar a ARDUINO MEGA2560+EthernetShield REV3 but components diposed in only

    $341 (Avg Bid)
    $341 Avg Bid
    24 bids

    ...per given specifications), print it and mount the LED as well. Specifications as below: 1. PCB size is 5 x 5 inch 2. Pieces - 5 (Initial) 3. Single side aluminium PCB - SMD LEDs placed in 3 rows (9 x3 = 27) More details will be provided after the initial offer. A Non-disclosure agreement will need to be signed before undertaking the work. [Removed

    $160 (Avg Bid)
    $160 Avg Bid
    26 bids

    ...animation effects that will need to be applied on some of the pages. All in all we have the 17 following pages to complete: Science & Technology Landing Page Photosynthesis 101 LEDs 101 Spectral Science LED Growing Guide Product Development History Case Studies Landing Page Individual Case Study Page Template Resources Landing Page Savings Calculator

    $291 (Avg Bid)
    $291 Avg Bid
    48 bids

    ...animation effects that will need to be applied on some of the pages. All in all we have the 17 following pages to complete: Science & Technology Landing Page Photosynthesis 101 LEDs 101 Spectral Science LED Growing Guide Product Development History Case Studies Landing Page Individual Case Study Page Template Resources Landing Page Savings Calculator

    $690 (Avg Bid)
    $690 Avg Bid
    97 bids

    ...power output to 2 controlled components. (mode 1 = yellow color and 35% power output, mode 2 = green color and 70% power output, mode 3 = blue color and 100% power output). 9) LEDs only stay on for 5 seconds after press then turns off to save power. Maximum dimensions with battery would be 15 x 15 x 5 mm. All parts must be standard and easy to source

    $100 (Avg Bid)
    $100 Avg Bid
    7 bids

    ...[login to view URL]) to the Arduino along with an LED and buzzer like this: ([login to view URL]) ( https://www.amazon.com/EUDAX-Tracker-9X5-5mm-Quadcopter-Control/dp/B071ZP615Y/ref=sr_1_1_sspa?ie=UTF8&qid=1536621411&sr=8-1-spons&keywords=5v+buzzer&psc=1)

    $412 (Avg Bid)
    $412 Avg Bid
    59 bids

    I am trying to get someone to integrate my flashing circuit with a motion censer ,,,either create a Gerber file or make the whole motherboard it...am trying to get someone to integrate my flashing circuit with a motion censer ,,,either create a Gerber file or make the whole motherboard itself. It has to operate 20 5mm LEDs lights with 2 AA battery's.

    $52 (Avg Bid)
    $52 Avg Bid
    1 bids

    I'm a hobbyist and not very skilled with programming and looking for assistance on a project. I have a square table top with 140 LEDs (20 strands 7 LEDs long) all 20 strands start from the middle and run twards the edges (5 strands per edge.) I would like to hire someone to program at least 5 effects onto an Arduino pro mini. I also have a small PCB

    $144 (Avg Bid)
    $144 Avg Bid
    3 bids

    ...panel. Preferred display is 7 segment LED but open to alternatives. The driver will be wearing polarised sunglasses so LCD displays may not work. 11 - 14 volt DC powered. All LEDs light up for 10 seconds when powered on to check function. I need 2 units constructed. Components can be loose. I will make the enclosure and mounting hardware. I have CNC

    $1033 (Avg Bid)
    $1033 Avg Bid
    27 bids

    similar to this video: [login to view URL] what i want is: LEDs to flick (as if they are candles) & when someone blow they turn off but i want something more than this: 1-A TV screen is displaying an image, telling user to blow the candles 2-when user blow, the candles switch off 3-another picture is displayed on screen 4-a

    $240 (Avg Bid)
    $240 Avg Bid
    17 bids

    You must have good experience in Xamarin Android AND Arduino to app...AND Arduino to apply. Android app needs to send data to and receive data from the Arduino code. The Arduino code is already written and the circuit is easily created with 6 leds and a temp sensor. The bulk of the app is written, we just need the code to interface with the Arduino

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    20 bids

    ...data The BLE SoC that is being used is the NRF52. The NRF52 will be controlling an RGB LED strip. The plan for the mobile app is to allow the user to change the colors of the LEDs . The strip will also be animated, so the user will be able to edit each frame. The current number of frames is to be 24. The app will need to be able to send the data to the

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    37 bids

    ...This is the scheme of the junction : || || || || || =Junc2==================== |Junc1| ||PED Requirements 1. Simulate this with real arduino device (or if you dont have the leds maybe on a simulator software) and make a video without your hands or voice please :) Also comment my code please it should be super easy 2. Make a report (1500 - 2500 words

    $43 (Avg Bid)
    $43 Avg Bid
    6 bids

    ...panel. Preferred display is 7 segment LED but open to alternatives. The driver will be wearing polarised sunglasses so LCD displays may not work. 11 - 14 volt DC powered. All LEDs light up for 10 seconds when powered on to check function. I need 2 units constructed. Components can be loose. I will make the enclosure and mounting hardware. I have CNC

    $493 (Avg Bid)
    $493 Avg Bid
    33 bids

    ...devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will report you by email. You can also watch the pcb via webcam or the ide by teamviewer

    $139 (Avg Bid)
    $139 Avg Bid
    20 bids

    ...button The Task: Write a program in PLP assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the LEDs every time the value is increased. The memory address of the LEDs is 0xf0200000. The table below shows the meaning and an example usage of the instructions covered in the video, PLP Instructions for Project

    $35 (Avg Bid)
    $35 Avg Bid
    8 bids

    ... This is a one or two total interview (1-1.5 hours interview) with 2 cameras and are looking for B-Cam that matches with Sony FS7. Would also like to have local light kit (LEDS). This will be a narrative approach documentary style with B-roll footage inside residence, on property and around community to go with the story. Would also want to rent a

    $984 (Avg Bid)
    $984 Avg Bid
    1 bids

    Video Production company ... This is a one or two total interview (1-1.5 hours interview) with 2 cameras and are looking for B-Cam that matches with Sony FS7. Would also like to have local light kit (LEDS). This will be a narrative approach documentary style with B-roll footage inside residence, on property and around community to go with the story.

    $328 - $984
    $328 - $984
    0 bids

    Design a PCB including Gerber and schematic. Led out puts 4 different type of LEDS Selectable by switch. Max current each led 1 amp Power source dual solar panel and 6v battery. Solar to charge battery. Current regulations for LED led supply 3.3 v 5 v supply output for mobile charging. Power input accept either solar or 12v 1 amp charger. Dimmer

    $21 (Avg Bid)
    $21 Avg Bid
    22 bids

    Top Leds Community Articles