Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,073 Eagle PCB jobs found, pricing in CAD
    PCB design 6 days left
    VERIFIED

    Need efficiently designed PCB, 6cm x 4cm for mini Wireless Ultrasonic Sensor Device with Visual & Audio Alerts. Confidentiality required. I can provide images of similar PCBs with some of the desired functions. Major components Two Ultrasonic Sensor / Transducer, Nordic Family chipset or equivalent, WiFi / Bluetooth, Light & LED Indicators

    $915 (Avg Bid)
    $915 Avg Bid
    18 bids
    3d model from photos 6 days left
    VERIFIED

    I have a bald eagle sculpture and need someone to make a 3d model that can be rotated - example is [login to view URL] . You need to tell me how many photos you need and the angles, I have a good DSLR camera. I will send you the photos and you need to make a 3d model that can be animated like the link above

    $198 (Avg Bid)
    $198 Avg Bid
    27 bids

    ...Motor or better). I have theoretically designed this system, which I would like you to convert it in to a controller (to program micro controllers and make a fully working PCB prototype). NOTE: Once you will successfully complete the project then you will courier the controller to me (I will pay for the shipment) and also share all the source codes

    $248 (Avg Bid)
    $248 Avg Bid
    6 bids

    1. Firmware (450) 2. Improve schematics (moderate changes) (150) 3. Improve PCB (200) As agreed over email. I've also posted on the site for all freelancers.

    $1035 (Avg Bid)
    $1035 Avg Bid
    1 bids

    ...Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup, power/ground planes, impedance control. • Understand the PCB and Assembly manufacturing

    $49 / hr (Avg Bid)
    $49 / hr Avg Bid
    5 bids

    Design 3 products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on LoraWan module, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer

    $1685 (Avg Bid)
    $1685 Avg Bid
    10 bids

    Design two products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on ESP-32, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer circuit

    $356 (Avg Bid)
    $356 Avg Bid
    4 bids

    DRV8313 circuit board. Need Gerber files and revised Schematic and board for manufacture.

    $181 (Avg Bid)
    $181 Avg Bid
    1 bids

    ...Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup, power/ground planes, impedance control. • Understand the PCB and Assembly manufacturing

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    34 bids

    I'm building a servo motor and have everything done but the circuitry. The circuitry includes 3 3-phase Brushless DC drivers. I've downloaded Eagle from Autodesk and have finished the schematic and board layout. Also generated Gerber files. I just need someone to review my work so I can send the files to a company to be manufactured.

    $145 (Avg Bid)
    $145 Avg Bid
    6 bids
    Mechanical design project 5 days left
    VERIFIED

    I am working on a smart home product and I need mechanical design work done for it. I have a PCB with bunch of components with mounting holes on them. I also have the unibody design completed. You will work with the existing files and do the mechanical design work for it.

    $149 (Avg Bid)
    $149 Avg Bid
    54 bids

    I am looking to have image files of 1 PCBs converted to PCB layout files (and then Gerber files) to permit manufacture. PCBs are big in size - A4 size. Two layers with some through hole. Complete set of Gerber files required including PCB folder, Fab folder, Assy folder and all its contain the workable file. A set of artwork, drilling drawing and

    $168 (Avg Bid)
    $168 Avg Bid
    19 bids

    ...needs tweaking. Not a lot of work to be done but it would help getting someone experienced. I also have designed a minamilistic PCB that needs tweaking, I made a one sided board in fritzing as I do not know how to use eagle or other design softwares. I can give you a basic idea of what needs to be done. (Removed by Freelancer.com Admin) Regards Vipul

    $110 (Avg Bid)
    $110 Avg Bid
    27 bids

    Need good electronic engineer with good knowledge/skills with Raspber...engineer with good knowledge/skills with Raspberry Pi to check, modify and route eagle project. Some items like power supply need to be modify to fit the RPi requirements. The project has to be done only whith Eagle CAD software ([login to view URL]).

    $172 (Avg Bid)
    $172 Avg Bid
    14 bids

    Need a pcba design; 2x canbus (tja10xx??) GPS module (offer price/performance product) GSM module (offer price/performance product) MCU (s32k or stm32 series) input power supply is 12V (6-36V is good) Offer good prices and show your references

    $1172 (Avg Bid)
    $1172 Avg Bid
    27 bids
    Golden Eagle 4 days left

    I need to put the 2018 Jeep Golden Eagle logo onto something with my laser engraver. The internet is full of the older golden eagle logos, but not the new one. Need this eagle image in just black and white.

    $92 (Avg Bid)
    $92 Avg Bid
    35 bids

    Hello, Looking for someone to manage the Social Media Accounts for Bald Eagle Realty, based out of Park City UT. Need to create and post ads on FB and grow, organically, on both sites.

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    26 bids

    [login to view URL] I need hundreds of sound relay delay circuits made that are similar to the one in above link. however it needs a few modifications. I know you do not manufacture the boards, but if I can get the gerber, bom, pick and place, etc files from you I have a good manufacturer that an do the rest. First let me describe the purpose of this circuit. I will be using an ipad to take pho...

    $212 (Avg Bid)
    $212 Avg Bid
    25 bids

    Hello, we need to design a small pcb with a lipo bat charged using wireless power transfer. We need also to place a couple of buttons and a low consumption MCU. We need a couple of prototypes working. Simulations with SPICE will be a plus. If you think you can design this PCB really fast start your bidding with the word WPTICAN. All biddings which do

    $2986 (Avg Bid)
    $2986 Avg Bid
    32 bids

    ToneTag is Bangalore based product startup. We are looking for creative designers who have experience in Indu...following: - Concept sketching - Graphic design - Product design in accordance with industry standards - 3D modelling - 3D rendering - Electronic packaging - Working closely with PCB manufacturer - Prototype support - Preparing tooling files

    $41476 (Avg Bid)
    $41476 Avg Bid
    34 bids

    I need talented fresh graduate in field of electronic in Kuala Lumpur. Required Skills : PCB Designing Cuircut Designing MCU Programming ARM

    $648 (Avg Bid)
    $648 Avg Bid
    25 bids
    Fix PCB Design 3 days left

    We're using a PCB connected to an adafruit bluetooth feather board to power LEDs and to charge an iPad. We have a few designs that aren't working well, and are in need of someone to produce an improved design that fits our requirements. The board just needs to power LED lights, charge an iPad, and connect to a bluetooth component with firmware.

    $629 (Avg Bid)
    $629 Avg Bid
    25 bids

    Gerber Design: Dimension of PCB : 140 mm X 100 mm Major components : Microchip control PIC18F family Display : 3.5" TFT display MICROCHIP LAN : ENC23j60 SPI FLASH Memory USB FTDI series Maxim series of ADC

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    28 bids

    I need a power strip that is similar to many other products in terms of function (just google wifi power strip...terms of function (just google wifi power strip etc). I will even send you one to deconstruct to get a better idea. I need the design of the strip as well as the wiring and pcb to control it. I will create a separate project for the coding.

    $3038 (Avg Bid)
    $3038 Avg Bid
    39 bids

    Please do chat me and I explain everything

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    34 bids
    Design project 2 days left

    I need a logo designed. Need a eagle logo

    $34 (Avg Bid)
    $34 Avg Bid
    51 bids

    We have a power electronics circuit ready. The task will be to design the PCB layout which we will send for fabrication and the electronic component soldering will be done by us. The prototype should run after fabrication for the project to be considered successfully completed.

    $140 (Avg Bid)
    NDA
    $140 Avg Bid
    24 bids

    Project Blue Board • Controller board for a hand held fan and light source. • All required information sh...cycle red  Fully Charged – ws2812 cycle Green • Battery level indicator- same ws2812  Colour range display based on charge level Deliverables • 10 x working prototypes on PCBPCB Layout • BOM - Component list • Gerber Files

    $1553 (Avg Bid)
    $1553 Avg Bid
    11 bids

    Learn PCB design using eagle can u teach me

    $182 (Avg Bid)
    $182 Avg Bid
    21 bids

    I have several schematics of guitar pedals in pdf that I would like to pass to eagle or other pcb design software

    $176 (Avg Bid)
    $176 Avg Bid
    9 bids

    The main idea is to make a similar product like the vaadu captor and adding a lot of enhancement : [login to view URL] what we need to improve regarding the vaadu captor are : - wifi(dual channel) / bluetooth.

    $1132 (Avg Bid)
    $1132 Avg Bid
    17 bids

    Hi Junaid A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Kicad PCB amendments required. resizing of it to make Raspberry PI accommodated on PCB. Let me know a best time to chat on it in detail.

    $65 (Avg Bid)
    $65 Avg Bid
    1 bids

    Hi Indir O., I noticed your profile and would like to offer you my project. We can discuss any details over chat. this is Convert KiCAD files to Eagle format in SMD. Please use the following components if possible: Mouser parts that are currently in stock 0805 thick film resistors 1% 1/8W-1/4W 0805 ceramic capacitors 35V 10-20% where possible 25-35V

    $129 (Avg Bid)
    $129 Avg Bid
    1 bids

    Looking for a hardware developer for a small device. The development will include: Schematics and Bom PCB design and Gerber files 5 complete working samples to be sent to chile. manufacture number, link on Digi-key or mouser and description for all components. The Maximum hardware size is 2cmx2cmx1cm and include a speaker, battery (70-100mah), Bluetooth

    $926 (Avg Bid)
    $926 Avg Bid
    3 bids

    I want the schematic and also the corresponding pcb of this circuit design with all the needed (Gerber) files.( You must only use the free version of KiCad software, use of another software design package is not acceptable ! ). I will provide you with a design from scratch ( by hand - pdf file ). I believe it will be an easy job for someone who knows

    $92 (Avg Bid)
    $92 Avg Bid
    4 bids

    I need a professional who could design a LED PCB (as per given specifications), print it and mount the LED as well. Specifications as below: 1. PCB size is 5 x 5 inch 2. Pieces - 5 (Initial) 3. Single side aluminium PCB - SMD LEDs placed in 3 rows (9 x3 = 27) More details will be provided after the initial offer. A Non-disclosure agreement will

    $168 (Avg Bid)
    $168 Avg Bid
    24 bids

    I have a requirement of designing and developing Home Automation products. Devices Needed: ... Components should be selected such that pricing is reasonable without compromising the quality. 2. Do not use readily available boards like Arduiono or Rasberry Pi. A new PCB should be designed as per the project need. Detailed requirements are attached.

    $1336 (Avg Bid)
    $1336 Avg Bid
    22 bids

    I need to program a Pcb that’s uses a Atmega1280v TQFP that needs a Bootloader and program the source code , and test.

    $432 (Avg Bid)
    $432 Avg Bid
    16 bids

    ...made the design files with using Eagle software and program it using MikroC using the PIC18F2550 controller which I will provide once the project has been awarded. I will need a sample code using MikroC along with any required revisions to my current design files. Payment 5% To start 45% After any required Eagle Revisions 50% upon getting a working

    $628 (Avg Bid)
    $628 Avg Bid
    3 bids

    Hi Karthikeyan can you design a pcb for a LED strobe and it should me switch on/off using pwm signals

    $39 (Avg Bid)
    $39 Avg Bid
    1 bids

    I need a gps tracker + live web tracking platform login for various user The web tracking map have to show GPS satellites and CELL triangulation and WIFI pcb design + code ( pcb is design is done and 90% of code is done ) The tracker send GPS-CELL-WIFI data via HTTP/Gprs connection to a server/web page And from web interface must have 2 button to

    $226 (Avg Bid)
    $226
    1 entries

    Hello everyone, I would love your help to develop a simple rounded PCB board that could fit a Nodemcu board with 6 buttons and a tp4056. Please check the Fritzing file attached before messaging me

    $221 (Avg Bid)
    $221 Avg Bid
    18 bids
    VENDING TELEMETRY 1 hour left
    VERIFIED

    ...keyboard 3. The coin mechanism 4. Card Reader [login to view URL] receiver/collector 6. Termoprinter /option/ The project requires: - To design the hardware /scheme and PCB/ of the controller with the assistance and guidance from the assignor - To write a firmware, which will execute the assigned tasks- this will be described in detail in the

    $7739 (Avg Bid)
    $7739 Avg Bid
    22 bids

    Hello, I’m looking for someone with experience working with ESP32 and also designing PCB for production. I have a development board with a schematic that needs updates to fit our current requirements. Some of the work are as follow: 1. Remove some of the parts from the development board that are unnecessary, and not applicable to our current function

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    59 bids
    Trophy icon Mustang Logo Parody Ended

    ...horses back. but any change i'm open to. MUST scream American. American flag, American stripes, Red White and Blue. Anything American. Please stay away from things like an eagle, or other animals. You can use a picture of the mustang car (link below) just no logo's on the car [login to view URL]

    $26 (Avg Bid)
    Guaranteed
    $26
    43 entries

    Hi, We are looking for a pcb designer who should have good knowledge on mixed signal pcb designing, analog circuit designing and multi layer pcb designing. Submit your proposal with your previous experience. Details of the project will be shared to the concerned freelancer who got selected.

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    34 bids

    Hello, I need some expert with SolidWorks 2017 installed and have knowledge on modfying part and put PCB and joystick on it easily. Don't bother applying if you don't have SW 2017 installed or can't work fast enough. Type California at the begining of your proposal so I know you read what I say.

    $40 (Avg Bid)
    $40 Avg Bid
    21 bids

    ...2. Use the above [login to view URL] to record and play a wav file a digital mic on I2S ICS-43434 IC and play wav using MAX98357A IC 3. Make an audio PTT (Push-To-Talk) instead of PCB button. By detecting the rising level on the recorded audio level, ok voice keyword recognized. 4. Doing above but record and play from ram with Flak encoding as needed by Google

    $703 (Avg Bid)
    $703 Avg Bid
    3 bids

    I need a logo for a flooring company called: Spaulding Epoxy Flooring They like the idea of an Eagle mascot in the design and the main colors are Red/White/Blue Please DO NOT send Mock Ups of the logo on retail stores, walls of buildings, or anything other than a WHITE Background. White Background ONLY.

    $129 (Avg Bid)
    Guaranteed Sealed
    $129
    253 entries