Telecommunications Engineers and Electronics Engineers For Hire

  • Telecom
  • Electronics
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 151 results
  • Hire     ahmedmohamed85
Hire     ahmedmohamed85

    ahmedmohamed85 ahmedmohamed85

    Egypt $50 USD / hour
    VHDL,Verlog,Systemverilog,Xilinx ISE,Vivado, Altera Quartus, Vivado HLS
    Egypt
    7.1
    190 reviews 190 reviews $50 USD per hour
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool,...
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000 less
  • Hire ahmedmohamed85
  • Hire     iquicksolution
Hire     iquicksolution

    iquicksolution iquicksolution

    Pakistan $10 USD / hour
    Professional Engineer
    Pakistan
    4.2
    19 reviews 19 reviews $10 USD per hour
    My name is Asad Shafiq from Pakistan.We are group of Professional Engineers started a company GLE. We all have Professional Experience. We have expertise in followings ✔ ✔ MATLAB , SIMULINK ✔ ✔ Content Writing ,Proof Reading , Data Entry ✔✔ Circuit Simulation, PCB, Multisim, Eagle PCB, Altium, KiCad, Proteus,...
    My name is Asad Shafiq from Pakistan.We are group of Professional Engineers started a company GLE. We all have Professional Experience. We have expertise in followings ✔ ✔ MATLAB , SIMULINK ✔ ✔ Content Writing ,Proof Reading , Data Entry ✔✔ Circuit Simulation, PCB, Multisim, Eagle PCB, Altium, KiCad, Proteus, Pspice ✔✔ Technical Writing, Report Writing, Thesis Writing, Research Papers,Research Proposal, Literature Review ✔✔Academic Writing (Harvard, APA, MLA, IEEE, Chicago and Oxford styles) ✔✔Statistics ✔✔Statistics Analysis (SPSS/Excel/Minitab/Weka/R Programming) ✔ ✔Digital Signal Processing, Signals and Systems ✔ Control Systems, Mathematical modelling ✔ ✔ Machine Design, Thermodynamics, Heat Transfer Power Plants, Mechanics ✔ HTML ,CSS , Java Script ✔ ✔ SolidWorks , ANSYS less
  • Hire iquicksolution
  • Hire     dervish11
Hire     dervish11

    dervish11 dervish11

    Albania $30 USD / hour
    Civil Engineer
    Albania
    3.4
    2 reviews 2 reviews $30 USD per hour
    Area of Experiences and Qualifications:- ✔️ Soil Mechanics. ✔️ Structural analysis designs for R.C., Steel structures and Timber structures like ( Tanks, High rise buildings, Factories, and Halls) (Check my portfolio). ✔️ Design of any engineering drawings (Architecture, Stru. , Elec. and mech.) ✔️Generate good...
    Area of Experiences and Qualifications:- ✔️ Soil Mechanics. ✔️ Structural analysis designs for R.C., Steel structures and Timber structures like ( Tanks, High rise buildings, Factories, and Halls) (Check my portfolio). ✔️ Design of any engineering drawings (Architecture, Stru. , Elec. and mech.) ✔️Generate good quality structural drawings for the projects. ✔️ Structural analysis designs for roads, Highway, and airports. ✔️ Design of water, sanitary and rainwater drainage ✔️ Autocad and structural Analysis Programs as Robot, Etabs, and Depro. ✔️ BIM using Rivet, Tekla, and Archicad software (Check my portfolio). ✔️ Other Program as MS Project, ArcGIS. ✔️Interior design using Sketchup and 3D max. ✔️MATLAB Expert. ✔️Excel Expert. ✔️Reports and engineering articles writing. ✔️ Solving Mathematical and Physical Problems. less
  • Hire dervish11
  • Hire     MElizabethp
Hire     MElizabethp

    MElizabethp MElizabethp

    Colombia $30 USD / hour
    Electronic Engineer
    Colombia
    6.1
    8 reviews 8 reviews $30 USD per hour
    I am an Electronic Engineer, with experience in different fields mostly releated with technology product development. My expertise area: electronic design, software development, microcontrollers, design and construction of PCB boards, cloud solutions to connect the devices using Web and Mobile APPs, final design of...
    I am an Electronic Engineer, with experience in different fields mostly releated with technology product development. My expertise area: electronic design, software development, microcontrollers, design and construction of PCB boards, cloud solutions to connect the devices using Web and Mobile APPs, final design of products for manufacturing. My focus is using technology to help you to achieve your goals, maintain a close relationship, connecting with you and empowering together. less
  • Hire MElizabethp
  • Hire     mos3d
Hire     mos3d

    mos3d mos3d

    Egypt $25 USD / hour
    R&D Electronics Engineer ( Master Degree ✅ )
    Egypt
    6.1
    39 reviews 39 reviews $25 USD per hour
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work less
  • Hire mos3d
  • Hire     mechatronicsengr
Hire     mechatronicsengr

    mechatronicsengr mechatronicsengr

    Pakistan $25 USD / hour
    Embedded Systems Design and Development Engineer
    Pakistan
    6.3
    42 reviews 42 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire mechatronicsengr
  • Hire     MrDmytro
Hire     MrDmytro

    MrDmytro MrDmytro

    Ukraine $28 USD / hour
    PCB developer & microcontroller firmware developer
    Ukraine
    5.1
    18 reviews 18 reviews $28 USD per hour
    Electronic engineer, software engineer, system engineer. I develop custom electronics of any level of complexity. I have a well-equipped laboratory - prototyping is possible. I program for such microcontrollers: - ATmega (Arduino also) - STM32 - PIC For the development of printed circuit boards, I use Altium...
    Electronic engineer, software engineer, system engineer. I develop custom electronics of any level of complexity. I have a well-equipped laboratory - prototyping is possible. I program for such microcontrollers: - ATmega (Arduino also) - STM32 - PIC For the development of printed circuit boards, I use Altium Designer or (at the request of the customer) Eagle. Extensive experience in the development of embedded systems, automation systems, switching power supplies and inverters. less
  • Hire MrDmytro
  • Hire     felerrano
Hire     felerrano

    felerrano felerrano

    Ukraine $20 USD / hour
    3D modelling & CAD/industrial designer
    Ukraine
    5.3
    6 reviews 6 reviews $20 USD per hour
    Industrial engineer and CAD designer. In the Mechanical field: - Design mechanical pieces or elements - Design mechanisms - Design power transmission systems (Shafts, Gears, Belts, Pulleys, Bearings, and so on). - Create 3D CAD models of pieces or assemblies. - Create CAD models for 3D printing. - Create...
    Industrial engineer and CAD designer. In the Mechanical field: - Design mechanical pieces or elements - Design mechanisms - Design power transmission systems (Shafts, Gears, Belts, Pulleys, Bearings, and so on). - Create 3D CAD models of pieces or assemblies. - Create CAD models for 3D printing. - Create technical drawings of the mechanical pieces or assemblies so they can be fabricated - Create 3D rendered animations to show the functionality of a product. In the Electronic field: - Design Electronic circuits - Design Schematics - Design PCB layouts. (I can design boards with 1 or 2 layers) - I can work with Sensors, motors, actuators, and so on. Software skills: - SolidWorks; - KeyShot; - Altium Designer; - AutoCAD; - Kompas. less
  • Hire felerrano
  • Hire     sajjadtaghvaeifr
Hire     sajjadtaghvaeifr

    sajjadtaghvaeifr sajjadtaghvaeifr

    Japan $15 USD / hour
    PhD in Mechanical Engineering
    Japan
    2.2
    1 review 1 review $15 USD per hour
    I have got my PhD from department of bioengineering and robotics, Tohoku University, Japan. I am expert in Matlab, Mechanical Engineering Sofwares, Programming with Python, C, Cpp, Java,...
    I have got my PhD from department of bioengineering and robotics, Tohoku University, Japan. I am expert in Matlab, Mechanical Engineering Sofwares, Programming with Python, C, Cpp, Java,... less
  • Hire sajjadtaghvaeifr
  • Hire     Mestek
Hire     Mestek

    Mestek Mestek

    Egypt $25 USD / hour
    Hardware & Electronics engineer
    Egypt
    5.2
    26 reviews 26 reviews $25 USD per hour
    i am hardware engineer that likes product design so much and it is my only passion in life,i have my own maker space equipped with all needed components and tools to make new products and designs i have more than 15 years of experience in electronics in general and microcontrollers,having more than 8 years of working...
    i am hardware engineer that likes product design so much and it is my only passion in life,i have my own maker space equipped with all needed components and tools to make new products and designs i have more than 15 years of experience in electronics in general and microcontrollers,having more than 8 years of working with ALL arduino modules ,i have excellent knowledge with IOT and home automation I have M.Sc. in computer Engineering I can make designs for wordpress websites and online stores as well as logos for new products less
  • Hire Mestek

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""