LabVIEW Scientists For Hire

  • LabVIEW
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire mechatronicsengr
    5.4
    16 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire artem127
    3.6
    1 review $40 USD per hour
    Hi, my name is artem, 16 yrs IT background (9 years as “Solution Architect role” in a large enterprise), professional and easy to deal with, can speak English, Russian I’m a technical issue killer and a fast learner, it was be proved in the past 16 yrs, every company which hired me in the past, always got a HUGE...
    Hi, my name is artem, 16 yrs IT background (9 years as “Solution Architect role” in a large enterprise), professional and easy to deal with, can speak English, Russian I’m a technical issue killer and a fast learner, it was be proved in the past 16 yrs, every company which hired me in the past, always got a HUGE benefit increase, so please spend 10 mins on me, it’s absolutely worth it. My skill set cover: - Web Development(8+ years) * PHP(Laravel, Yii, CodeIgniter, WordPress, CakePHP, ...) * Python(Django, Flask), Ruby on Rails * Node.js, Express * AngularJS, 2/4/5/6 * Sass, CSS * ReactJS, Vue.js * JSP, ASP - Hybrid * Flutter * React Native - Native Android & iOS * Java * ObjectiveC, Swift less
  • Hire vtlabs
    0.9
    1 review $25 USD per hour
    I have 4 years experience developing Embedded applications using C++, C and assembly. I can program the following MCUs/MPUs: 1. PIC16,18,24 and PIC32 uisng MikroC and MPLabX. 2. AVR, ARM, SAM and STM32 using MikroC, Atmel studio with ASF, Atollic or Keil C 3. NRF and ESP microcontrollers on NRF SDK, ESP SDK or on...
    I have 4 years experience developing Embedded applications using C++, C and assembly. I can program the following MCUs/MPUs: 1. PIC16,18,24 and PIC32 uisng MikroC and MPLabX. 2. AVR, ARM, SAM and STM32 using MikroC, Atmel studio with ASF, Atollic or Keil C 3. NRF and ESP microcontrollers on NRF SDK, ESP SDK or on the Arduino IDE. 4. All Arduino Boards and I have experience with the AVR, SAM boards, NodeMCU, ESP32, NRF52480, uC32, Wi-FIRE etc. I can design Circuits and PCBs using the following software: 1. Altium Designer 2. Eagle Premium 3. Proteus 4. KiCAD I'm also an instrumentation Engineer with these skills: 1. PLC programming of ABB, Siemens, Omron or Direct Logic PLCs 2. SCADA development on Indusoft Web studio, Pulse or RS View 32 Works. 3. Electrical wiring diagrams on Autocad Electrical. 4. 2D and 3D CAD drawings on Autocad or Solid works. I'm also a Software developer for PC and Web. less
  • Hire mos3d
    3.0
    1 review $25 USD per hour
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work less
  • Hire Hengxing0108
    2.8
    1 review $30 USD per hour
    I am a mechanical engineer, working in industry since 2003. I am experienced in mechanical design, analysis & simulation, CNC machining, 3D Modeling, 3D Rendering. I use SolidWorks, CATIA, NX, MasterCAM, SolidCAM, Ansys, AutoCAD, Matlab and Blender, 3D Max, SketchUp so on. My experiences include the following: - 3D...
    I am a mechanical engineer, working in industry since 2003. I am experienced in mechanical design, analysis & simulation, CNC machining, 3D Modeling, 3D Rendering. I use SolidWorks, CATIA, NX, MasterCAM, SolidCAM, Ansys, AutoCAD, Matlab and Blender, 3D Max, SketchUp so on. My experiences include the following: - 3D modeling from images or 2D drawings. - 3D modeling, 3D rendering and 3D Animation. - Product concept and detail design. - Dies, tooling, fixtures design such as plastic injection mold, sheet metal stamping and roll formed products. - Static &Dynamic, kinematic, CFD, thermal flow analysis and simulation. - Operating and CNC programming mill, turn, wood CNC machine. - C and C++ programming by using ActiveX, Open API, OpenGL. I will be always with my employer. Regards. Thank you. less
  • Hire okzhang321
    2.1
    1 review $30 USD per hour
    I am full stack developer with over 7 years experience. My main skills are: ☆ Frameworks ☆ - PHP and Laravel - WordPress, CMS - Ruby on Rails ☆ Front end Techniques ☆ - Javascript/JQuery, HTML, CSS, Bootstrap - Vue.js - AngularJS - NodeJS - ReactJS ☆ Database ☆ - PostgreSQL, MySQL, Firebase, AirTable, SQLite,...
    I am full stack developer with over 7 years experience. My main skills are: ☆ Frameworks ☆ - PHP and Laravel - WordPress, CMS - Ruby on Rails ☆ Front end Techniques ☆ - Javascript/JQuery, HTML, CSS, Bootstrap - Vue.js - AngularJS - NodeJS - ReactJS ☆ Database ☆ - PostgreSQL, MySQL, Firebase, AirTable, SQLite, MongoDB, Amazon DynamoDB. ☆ Mobile APP ☆ - Hybrid Mobile (React Native, IONIC Cordova, Xamarin) - iPhone (Objective C, Swift) - Android(Java, Kotlin) - Messengers/Chat apps - VoIP mobile apps, Sipdroid, Linphone customization - Video streaming, Wowza Cloud/Engine - OpenVPN customization - AR-SLAM ☆ DevOps ☆ - Amazon Web Services - Docker - Kubernetes - Jenkins I'm responsible and always punctual to deadlines. My goal is to make every client satisfied. Thank you! less
  • Hire ahmed4499
    1.6
    3 reviews $7 USD per hour
    I am computer engineer with MSc degree in cryptography and i am certified Labview architect and Labview developer and Associate developer with big experience i can help you manage your work with less prices , i do not care about money but i care about the quality of work , , i can design diagrams using UML , i can...
    I am computer engineer with MSc degree in cryptography and i am certified Labview architect and Labview developer and Associate developer with big experience i can help you manage your work with less prices , i do not care about money but i care about the quality of work , , i can design diagrams using UML , i can speak multi languages , ENGLISH , GERMAN AND ARABIC less
  • Hire LTEDeveloper
    0.7
    1 review $55 USD per hour
    I have over 10+ years of hardware and software development. 1. Experienced in Analog and Digital circuit and PCB design - Schemes and PCB layout, Gerber Files, BOM, Assembly drawings - various complexity from simple to multi-layered (6 or more layers) containing diff pairs. - Circuit simulation 2....
    I have over 10+ years of hardware and software development. 1. Experienced in Analog and Digital circuit and PCB design - Schemes and PCB layout, Gerber Files, BOM, Assembly drawings - various complexity from simple to multi-layered (6 or more layers) containing diff pairs. - Circuit simulation 2. Experienced in embedded programming - Various MCU's and processors (Microchip PIC, Atmel, processors with ARM core) - Arduino project(LED, various LCD, Keyboard, Mic&Speaker, Memory,...) - Various wired and wireless communications (Ethernet, WiFi, Bluetooth, ZigBee, USB, RS232/485, CAN, I2C,DALI BUS etc.) - Various mobile communications using Mobile Operators Network (2G/3G/4G) - sensors (temperature, humidity, precipitation, air pressure,...) Keyword: : IOT, Bletooth WiFi Module, Home Automation, ESP8266, ESP32, CC2530, CC2540, STM32, ARM, AVR, Microchip PIC, 8051, C/C++, Mplab X, Modelsim, Mikroc, Proteus, GSM, WCDMA, WIMAX, LTE , 4G , 2G , GPRS less
  • Hire AgnarConsulting
    0.8
    1 review $28 USD per hour
    Agnar Consulting specializes in providing Engineering solutions. We are well experienced in Python scripting, specially in Web Scraping. In addition, we provide solutions with C/C++ as well. In the Digital Electronics domain we provide services in designing digital system for FPGAs based on VHDL/Verilog, using...
    Agnar Consulting specializes in providing Engineering solutions. We are well experienced in Python scripting, specially in Web Scraping. In addition, we provide solutions with C/C++ as well. In the Digital Electronics domain we provide services in designing digital system for FPGAs based on VHDL/Verilog, using Xilinx/Altera tools based on requirements. In the Mechanical engineering domain we provide services in Mechatronics/ Robotics solutions based on python/C++/Arduino, CAD solutions on solidworks. Apart from that, BioMedical engineering solutions based on MATALB and python are also provided. less
  • Hire samersamy
    2.5
    2 reviews $20 USD per hour
    I am Automation engineer worked for some multinational reputed companies in Africa and Middle-east area. I was working as an Automation engineer before for Schneider Company. working also part-time with some factories. please check my portfolio to have a look on some big projects done by me.you will find professional...
    I am Automation engineer worked for some multinational reputed companies in Africa and Middle-east area. I was working as an Automation engineer before for Schneider Company. working also part-time with some factories. please check my portfolio to have a look on some big projects done by me.you will find professional engineering and high commitment less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""